IPR Medical

Philips M1356A Compatible Ultrasound Fetal Transducer, Reusable, 9.8 ft (3.0 m)

$315.00

The M1356A compatible ultrasound fetal transducer (SKU FUS-PH01) is a reusable aftermarket replacement (not OEM) for fetal heart rate monitoring, with a 9.8 ft (3.0 m) cable length.

Transducer Type Ultrasound
Cable Length 9.8 ft (3.0 m)
Lifecycle Reusable
Packaging 1 set per box
Replaces Philips M1356A

Works with: the monitor models listed in the Specifications tab. Browse more fetal monitoring accessories.

IPR Medical buys, sells, repairs, and stocks parts for fetal monitoring accessories and patient monitors. Call 855-477-8866 or email cs@iprmed.com.

SKU: FUS-PH01 Categories: , Tags: ,
Send In Philips M1356A Compatible Ultrasound Fetal Transducer, Reusable, 9.8 ft (3.0 m) for Repair

Specifications

Product Type Compatible Aftermarket Replacement (Not OEM)
IPR Part Number (SKU) FUS-PH01
Replaces OEM Part Philips M1356A
Category Cables & Sensors > Fetal
Product Ultrasound Fetal Transducer
Transducer Type Ultrasound
Cable Length 9.8 ft (3.0 m)
Lifecycle Reusable
Packaging 1 set per box

Compatible Monitor Models

Manufacturer Compatible Models
Philips 1350, M1351A, M1353A, M2922A, Series 50, Series 50A

Cross Reference / Interchange Part Numbers

Manufacturer / Supplier Part Number
Philips M1356A, 80310120
AIV FM10835
Beta Biomed B600-3104
Pacific Medical NUPH100
Tenacore TFCU-PH05-2303, TFHU101
Unimed UFU200-20

IPR Medical buys, sells, repairs, and stocks parts for ultrasound fetal transducers and the monitoring equipment they support. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, or any other manufacturer or supplier named on this page. Philips, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

What Is the M1356A Compatible Ultrasound Fetal Transducer?

The IPR Medical FUS-PH01 is a compatible aftermarket (not OEM) ultrasound fetal transducer that replaces OEM part M1356A. Ultrasound transducers of this kind are used for fetal heart rate monitoring. The FUS-PH01 is a reusable unit on a 9.8 ft (3.0 m) cable, and it is shipped as one set per box.


Compatible Monitor Models

Before ordering, find your monitor in the Compatible Monitor Models table on the Specifications tab, which holds the complete list of models this transducer is listed for. If your model does not appear there, or you are not sure which entry matches your equipment, IPR Medical can help you check.


Design and Construction

Its transducer type is ultrasound, and its cable measures 9.8 ft (3.0 m). As a reusable device, it is meant to be cleaned after each patient in line with facility protocol and looked over for wear before the next use. Packaging is one set per box.


When to Replace Your Ultrasound Fetal Transducer

A heart rate signal that is weak, noisy, or lost more often than usual, or one that cuts out when the cable is flexed, suggests the transducer needs attention. Physical damage is just as telling: cracks in the transducer body, a cable jacket that is torn or kinked, or a connector that is broken or no longer seats firmly. Connecting a spare that is known to work to the same monitor shows whether the original transducer is the source of the problem.


Cross Reference and Interchange Part Numbers

OEM part M1356A is the primary reference number for this compatible transducer. The other interchange numbers, OEM and aftermarket alike, are grouped by brand in the Cross Reference / Interchange Part Numbers table on the Specifications tab.


Why Source Ultrasound Fetal Transducers from IPR Medical?

Our technicians repair and test patient monitoring equipment in-house, which gives our team practical insight when you need to choose a replacement accessory. IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitors and infusion pumps. Call 855-477-8866, or browse our fetal monitoring accessories to find related parts.

IPR Medical buys, sells, repairs, and stocks parts for ultrasound fetal transducers and the monitoring equipment they support. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, or any other manufacturer or supplier named on this page. Philips, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

Weight 1 lbs
Dimensions 8 × 8 × 6 in

Reviews

There are no reviews yet.