Hospira Plum A+ with Mednet
The Plum A+ with Hospira MedNet Software is an advanced medication management system designed to meet the growing demand for hospital wide, alternate site, and home healthcare device standardization. Advanced clinical capabilities, autoprogramming, networked communication, and a plug-and-play platform make the Plum A with Hospira MedNet Software a convenient and cost-effective multipurpose, multimode, flexible infusion system.
- Flow Rate Range: 0.1 to 99.9 mL/hr (in 0.1 mL/hr increments); 100 to 999 mL/hr (in 1 mL/hr increments – Lines A and B)
- Occlusion Pressure: 0.5 mL/hr minimum for each line
- KVO: 1 mL/hr or the last primary delivery rate, whichever is less
- VTBI Range: 0.1 to 99.9 mL (in 0.1 mL/hr increments); 100 to 9999 mL (in 1 mL/hr increments)
- Accuracy: ± 5%
- Power Requirements: 120 VAC; 50-60 Hz; 35 W (0.5 A, 250 VAC (6 V; internal; rechargeable) Less than 6 hours (if operating at 125 mL/hr on one line)
- Bolus – 0.5 mL of air or larger; Cumulative – 0.5 mL of air out of 5.3 mL of fluid (Proximal 0.5 mL, total 1 mL (0.5 mL concurrent)
-
More Details
Communications:
Ethernet LAN: Shielded Ethernet cable plugged into an RJ-45 connector
Wireless LAN: Device name: Hospira MedNet Wireless 802.11 a/b/g Module
- Standards: IEEE 802.11 a/b/g
- Transmit Power: 802.11 b/g – 17.6 dBm; 802.11 a – 19 dBm
- Antenna: Integrated Surface Mount Antenna
- Certification: FCC Part 15.247, 15.407; IC RSS-210, RSS-102
- FCC ID: STJ-80411396001, IC: 5627A-80411396
Alarms
- Distal Occlusion
- Proximal Occlusion
- Distal air-in-line
- Proximal air-in-line
- Low battery
- Door open while pumping
- Lockout violation
- VTBI complete
- Valve/cassette test failure
- Nurse call
- No action alarm
- Infuser idle for two minutes
Features
- Dose calculation
- Loading dose
- Multi-step programming
- Therapy selection
- Nurse call
- Delayed start setting
- Standby mode
- Drug library
- Piggyback/Concurrent delivery modes
- Titration
- Anti free-flow protection
- Networked communications
- Air removal/backpriming
- Air detection (proximal and distal)
- Alarm history
- Volumes infused (A,B, total volumes)
- KVO at dose end (1 mL/hr or less depending on delivery rate) or Continue Rate (CR) to continue at the current rate
- Variable distal pressure setting
- Nonpulsatile volumetric accuracy
- Microprocessor control
- Large LCD
- Panel back illumination on mains power
- Lockout switch
- Standard fulfill, partfill, syringe, and vial use
- Enteral and parenteral fluid delivery
- Blood and blood product deliver
