Eitan Medical/ Q Core Sapphire Multi-Therapy
The Eitan Medical Sapphire Multi-Therapy is a complete infusion system for varied clinical uses in hospital, ambulatory, and EMS settings. Combining high-end volumetric infusion pump functionality with compact size and low weight, it is designed for PCA, TPN, Continuous, Piggyback, Intermittent, and Epidural treatments — all on a single platform with one standard interface.
Built on Eitan Medical’s patented Flow Control Technology with an intuitive touchscreen and robust hardware, the Sapphire delivers medication infusion confidence across the full continuum of care — from hospitals and infusion centers to homecare and pre-hospital medical transport. It is approved for both air and ground medical transportation, weighs just 418 g without battery, and runs approximately 24 hours on a single charge.
IPR Medical is one of the few authorized Level 2 Eitan Medical service centers in the United States. We perform manufacturer-authorized repairs, preventive maintenance, and warranty service on all Sapphire pumps — keeping your fleet compliant and calibrated without sending units back to the manufacturer.
Eitan Medical Sapphire Multi-Therapy Infusion Pump
Volumetric, single-channel, touch screen infusion pump for hospital, ambulatory, homecare, and EMS environments. Supports Continuous, Multi-step, TPN, Intermittent, PCA, Epidural, and Secondary (Piggyback) therapy modes on a single platform. Approved for air and ground medical transportation.
| Pump Type | Volumetric, single-channel, touch screen pump, Eitan Medical Flow Control |
| Multi-Therapy Infusion Modes | Continuous, Multi-step, TPN, Intermittent, PCA, Epidural, and Secondary (Piggyback) |
| Flow Rate | 0.1 – 999 mL/h with increments of 0.1 mL/h |
| Flow Rate Accuracy | ±2.5% according to IEC 60601-2-24 |
| PCA Flow Rate | Basal rate 0.1–99.9 mL/h; Bolus rate up to 600 mL/h |
| Epidural Flow Rate | Basal rate 0.1–25 mL/h; Bolus/Dose rate 125, 200, 300, 400, or 500 mL/h |
| Volume (VTBI) | 0.1 – 9,999 mL with increments of 0.1 mL |
| KVO Rate | Up to 20 mL/h with increments of 0.1 mL/h |
| Downstream Occlusion | Up to 17.4 PSI (1.2 Bar) |
| Prime | Manual or automatic priming (600 or 900 mL/h) |
| Disposable Set | Automatic anti-free-flow set |
| Touch Screen | 3.2″ color portrait QVGA (64K colors) |
| Battery | Rechargeable Li-Ion, 7.4V / 1960 mAh |
| Battery Operation Time | ~24 hrs @ 125 mL/h |
| Power Source | AC adaptor 100–240 VAC, 50–60 Hz |
| Water & Dust Protection | IP24 splash/dust standard according to IEC 60601-1-11 |
| Transportation | Approved for air and ground medical transportation (US) |
| Dimensions (H × W × D) | 143 × 96 × 49 mm (5.63 × 3.78 × 1.93 in) |
| Weight | 418 g (14.7 oz) without battery |
A single solution for multiple infusion needs
The Sapphire Multi-Therapy infusion system is a complete solution for varied clinical uses in hospital, ambulatory, and EMS settings. It combines high-end volumetric infusion pump functionality with compact size and low weight — offering tailored solutions for hospitalization, ambulatory, and home infusion, all in a single pump. Sapphire’s quick setup and intuitive workflows are designed to improve response time, leaving clinicians with more time to focus on patient care.
Patented Flow Control Technology
Sapphire is based on a unique combination of patented magnetic Flow Control Technology, innovative hardware design, intuitive touch-screen and software control, and low total cost of ownership. This technology platform delivers ±2.5% flow rate accuracy per IEC 60601-2-24 and powers a wide range of dedicated infusion pumps — creating a single platform that answers all medical infusion needs. The built-in automatic anti-free-flow set provides an additional patient safety layer during set changes.
Designed for hospital, ambulatory, and EMS use
At 418 g without battery and with a minimal footprint, the Sapphire is approved for both air and ground medical transportation in the US. Its IP24-rated housing protects against splash and dust per IEC 60601-1-11, and the 3.2″ color QVGA touchscreen delivers reliable programming in any clinical environment. With approximately 24 hours of battery operation at 125 mL/h and AC compatibility from 100–240 VAC, the Sapphire transitions seamlessly between stationary and mobile care settings.
Built-in safety and adaptability
With its robust design, easy maintenance, and built-in adaptability to evolving requirements, the Sapphire is engineered to deliver medication infusion confidence now and far into the future. Sapphire infusion therapy devices are flexible, allowing almost every infusion product to be delivered safely with multiple programming modes. Eitan Medical has also designed a range of accessories and dedicated sets for use in both home care and hospital settings, and offers remote drug library management and data connectivity through Sapphire Connect.
Authorized Level 2 service & warranty support
IPR Medical is one of the few authorized Level 2 Eitan Medical service centers in the United States. We perform manufacturer-authorized repairs, preventive maintenance, and warranty service on all Sapphire pumps — so your facility gets faster turnaround without shipping units back to the manufacturer.
Warranty repairs, annual PM certifications, and fleet servicing for the Eitan Medical Sapphire are available directly through IPR Medical as an authorized Level 2 service center. Contact us to learn more about our manufacturer-authorized service programs.
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 8 × 8 in |
| Condition: | Refurbished |
You may also like…
Curlin 6000 CMS
Original price was: $1,695.00.$1,495.00Current price is: $1,495.00.
Curlin Painsmart IOD
Original price was: $1,095.00.$995.00Current price is: $995.00.Related Products
