What Is the Mindray 650-206M Compatible IBP Adapter Cable?

The Mindray 650-206M compatible IBP adapter cable (SKU IBP-MRA-UT40) is a reusable, aftermarket replacement (not OEM) for the Mindray / Datascope 12-pin invasive blood pressure cable for Utah transducers. It connects a disposable Utah-style pressure transducer to the 12-pin IBP input on a compatible patient monitor, carrying the transducer signal for arterial, central venous, and other invasive pressure monitoring. The cable is 13 ft (4.0 m) long.

Compatible Equipment

This cable is compatible with Mindray and Datascope monitors that use the 12-pin IBP input, including the Passport, Passport 8, 12, 12m and 17m, DPM 6 and DPM 7, BeneView T1, T5, T6, T7, T8 and T9, BeneVision N1, N12, N15, N17, N19 and N22 (including the Neo and N15 OR versions listed), ePM 10, 10M, 12, 12M and 15, iMEC, iPM, uMEC, cPM 8 and 12, BeneHeart D3 and D6, and VS 9 and VS 900. It is also compatible with the Edan Elite V5, V6 and V8, the iM8, iM9, iM50, iM60, iM70 and iM80 families, the M3, M8, M9, M50 and M80 families, and the X10 and X12, as well as the Pronk Technologies SL-8. The full list is in the Specifications tab.

Design and Construction

The monitor end is a round, keyed, male 12-pin connector, and the patient end is a Utah-compatible transducer connector. Confirm that the monitor has a 12-pin IBP input before ordering. The gray cable jacket is latex-free, and the cable is reusable and ships one per bag.

When to Replace Your IBP Adapter Cable

Replace the cable when pressure waveforms show noise, drift, or dropouts that change when the cable is moved, when the monitor reports a transducer or IBP cable fault that clears with a known-good cable, or when zeroing becomes unstable. Cracked connector housings, bent or recessed pins, loose transducer latches, and cuts or kinks in the jacket are also reasons to retire the cable. Swapping in a known-good cable is a quick way for biomedical staff to separate a cable fault from a transducer or monitor IBP module fault.

Cross Reference and Interchange Part Numbers

This cable interchanges with Mindray 650-206M and 115-017849-00 and cross-references Utah Medical 650-206M, AMC CB-91028, and Unimed BC-MR-UT. The AMC CB-91028 is listed at 10 ft (3.0 m), so length differs from this 13 ft (4.0 m) cable.

Why Source Mindray-Compatible IBP Cables from IPR Medical?

IPR Medical buys, sells, repairs, and stocks parts for Mindray and Datascope patient monitors, so our team can help match IBP cables and transducers to the monitors in your fleet. Our in-house technicians repair and refurbish monitoring equipment, and we keep compatible IBP cables and other monitoring accessories in stock to keep units in service. Browse more IBP cables and accessories or contact us for help confirming the right part.

IPR Medical buys, sells, repairs, and stocks parts for Mindray and Datascope patient monitors, including compatible IBP cables. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Utah Medical, Mindray, or any other manufacturer or supplier named on this page. Utah Medical, Mindray, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.