IPR Medical

YSI 427 Compatible Pediatric/Neonate Skin Surface Temperature Probe, 400 Series, 0.24 in (6.0 mm) Probe Disc, Straight Connector, 9.8 ft (3.0 m)

$60.00

The YSI 427 compatible pediatric/neonate skin surface temperature probe with straight connector (SKU TS-Y400S-PS30) is a reusable aftermarket replacement (not OEM) with a 0.24 in (6.0 mm) probe disc, a straight connector, and a 9.8 ft (3.0 m) cable, for use with 400 Series temperature technology.

Patient Size Pediatric/Neonate
Probe Type Skin Surface
Probe Disc 0.24 in (6.0 mm)
Temperature Technology 400 Series
Connector Straight
Cable Length 9.8 ft (3.0 m)
Replaces YSI 427

Works with: select Edan and GE Healthcare models. See the Specifications tab for the full list. Browse more temperature probes and cables.

IPR Medical buys, sells, repairs, and stocks parts for patient monitors and neonatal skin probes. Call 855-477-8866 or email cs@iprmed.com.

SKU: TS-Y400S-PS30 Categories: , Tags: ,
Send In YSI 427 Compatible Pediatric/Neonate Skin Surface Temperature Probe, 400 Series, 0.24 in (6.0 mm) Probe Disc, Straight Connector, 9.8 ft (3.0 m) for Repair

Specifications

Product Type Compatible Aftermarket Replacement (Not OEM)
IPR Part Number (SKU) TS-Y400S-PS30
Replaces OEM Part YSI 427
Category Cables & Sensors > Temperature
Product Temperature Probe
Patient Size Pediatric/Neonate
Probe Type Skin Surface
Probe Disc 0.24 in (6.0 mm)
Temperature Technology 400 Series
Connector Straight
Cable Length 9.8 ft (3.0 m)
Lifecycle Reusable
Packaging 1 per bag

Compatible Monitor Models

Manufacturer Compatible Models
Edan Elite V5, iM3, iM8, iM50, iM60, iM70, iM80
GE Healthcare B40

Cross Reference / Interchange Part Numbers

Manufacturer / Supplier Part Number
YSI 427
Draeger 2601200, 2607006

IPR Medical buys, sells, repairs, and stocks parts for neonatal and pediatric temperature probes and the patient monitors they work with. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by YSI, or any other manufacturer or supplier named on this page. YSI, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

What Is the YSI 427 Compatible Straight-Connector Pediatric/Neonate Skin Probe?

The IPR Medical TS-Y400S-PS30 is a compatible aftermarket (not OEM) pediatric/neonate skin surface temperature probe that replaces the YSI 427. Its probe disc measures 0.24 in (6.0 mm), the cable is 9.8 ft (3.0 m) long, and the connector is straight; temperature technology is 400 Series. It is meant for reuse rather than disposal.


Compatible Monitor Models

The GE Healthcare B40 and select Edan models, from the Elite V5 through the iM3, iM8, iM50, iM60, iM70, and iM80, make up the compatibility list for this probe. A monitor outside that group is not on the list, so check the model name on your unit against the Specifications tab before you order.


Design and Construction

Intended for pediatric/neonate patients, the TS-Y400S-PS30 has a 0.24 in (6.0 mm) disc for skin surface measurement, a straight connector, and a 9.8 ft (3.0 m) cable, and it uses 400 Series temperature technology. It is packed singly in a bag. Clean it between patients as facility protocol specifies, and inspect the disc and connector before reuse.


When to Replace Your Straight-Connector Pediatric/Neonate Skin Probe

Erratic skin temperatures, probe-off alarms while the probe is still attached, and readings that change when the cable is touched all suggest the probe needs replacing. Also check for a cracked disc, a frayed or cut cable, and a loose straight connector. If a known-good probe works normally on the same monitor, replace the original.


Cross Reference and Interchange Part Numbers

Interchange numbers for this probe are the YSI 427 it replaces and Draeger 2601200 and 2607006. You will find the same three numbers, each with its brand, in the cross-reference table on the Specifications tab.


Why Source Neonatal Skin Probes from IPR Medical?

IPR Medical is an independent service organization certified to ISO 9001:2015; our team keeps parts for patient monitors and infusion pumps in stock, buys and sells them, and repairs equipment in-house. For related probes, visit our temperature probes and cables page; to order, call 855-477-8866.

IPR Medical buys, sells, repairs, and stocks parts for neonatal and pediatric temperature probes and the patient monitors they work with. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by YSI, or any other manufacturer or supplier named on this page. YSI, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

Weight 1 lbs
Dimensions 8 × 8 × 6 in

Reviews

There are no reviews yet.