What Is the GE 2027263-002 Compatible SpO2 Adapter Cable?

The GE Healthcare 2027263-002 compatible SpO2 adapter cable is a reusable, aftermarket extension cable that connects Masimo LNCS pulse oximetry sensors to GE monitors equipped with Masimo SpO2. The patient’s LNCS sensor plugs into the end of this cable, which carries the signal to the monitor for continuous oxygen saturation and pulse rate monitoring. Because the cable is reusable and separate from the sensor, facilities can replace disposable or reusable LNCS sensors on their own without replacing the cable. It is a compatible replacement, not an original GE or Masimo part, and it is built to the same fit, form, and function as the OEM 2027263-002 cable, also known as the Masimo LNC-10-GE. The OEM cable is 10 ft (3.0 m); this compatible version is 7.9 ft (2.4 m), so confirm the length suits your setup.

Compatible Equipment Models

This compatible cable is confirmed for use with a broad range of Masimo-equipped GE monitors. These include CARESCAPE B450, B650, and B850 and CARESCAPE V100, Dinamap ProCare and ProSeries models, the Procare B40, and B105M, B105P, B125, B125M, B125P, and B155M monitors. It also fits Marquette Dash 2000 through Dash 5000 monitors, Solar 7000, 8000, 8000M, and i/9500 systems, Tram 451 and Tram modules, the PDM module, Eagle monitors, CardioLab and MAC-Lab, and Corometrics 128, 250, 250cx, and 259 fetal monitors. Datascope Accutorr, DPM, Passport, and PM series monitors and Bitmos sat-series oximeters are also listed. Many of these monitors were sold with more than one SpO2 technology, so confirm that yours is configured for Masimo SpO2 before ordering.

Design and Construction

The cable runs 7.9 ft (2.4 m) from the monitor to the sensor connection, giving enough reach for bedside, transport, and procedure-room setups without a second extension. The sensor end accepts Masimo LNCS sensors, including adult, pediatric, infant, and neonatal types in both disposable and reusable styles. The cable is reusable after cleaning according to facility protocol and ships one per bag.

When to Replace Your GE SpO2 Adapter Cable

SpO2 adapter cables flex constantly at both connectors and are often looped over bed rails or caught in equipment. Replace the cable when you see “SpO2 sensor off,” “no sensor,” or “cable fault” messages with a known-good sensor, when readings drop out or the pleth waveform becomes noisy as the cable is moved, or when you find a cracked jacket, a loose sensor-end latch, or bent or recessed connector pins. Testing with a known-good sensor and a second cable quickly shows whether the cable, sensor, or monitor is at fault.

Cross Reference and Interchange Part Numbers

This compatible Masimo LNCS SpO2 adapter cable, IPR Medical SKU SA-015RB-24LS, cross-references to GE Healthcare part number 2027263-002 and to Masimo part numbers 2016 (LNC-10-GE) and 2264 (MAC-GE). It also interchanges with Pacific Medical NXMQ105, Sage Services Group E02M-22M and E02M-36M, Tenacore TE2424, and Unimed U708M-21R and U710M-21R. Materials managers and purchasing staff can use any of these numbers to confirm the match against existing inventory, work orders, or requisitions. Some interchange numbers differ in length (Sage E02M-36M is 3.6 m, for example), so confirm the 7.9 ft (2.4 m) length suits your setup.

Why Source SpO2 Cables from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring and infusion equipment. Our compatible SpO2 cables and sensors give biomedical departments an affordable alternative to OEM accessories while matching OEM fit and function across GE CARESCAPE, Dash, Solar, and Dinamap fleets. Our team can help confirm which SpO2 technology your monitors use, match the right cable and sensor, and support your equipment with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for GE CARESCAPE, Dash, Solar, and Dinamap patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by GE Healthcare, Masimo, or any other manufacturer or supplier named on this page. GE Healthcare, Masimo, LNCS, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.