What Is the GE Compatible Masimo Adult Finger Clip SpO2 Sensor?

This GE Healthcare compatible adult finger clip SpO2 sensor is a reusable, aftermarket pulse oximetry sensor for GE and Marquette monitors configured with Masimo SET SpO2. It combines a hard-shell adult finger clip and a 9.8 ft (3.0 m) cable in a single direct-connect sensor, so no separate adapter cable is needed. It is a compatible replacement, not an original GE or Masimo part, and it is built to OEM fit, form, and function.

Compatible Monitor Models

This compatible sensor is confirmed for use with Masimo-equipped GE CARESCAPE B450, B650, B850, and V100 monitors, the B125 and Procare B40, and Dinamap ProCare 300, ProCare Auscultatory 400, ProCare with Masimo Pro 1000, Pro 300V2, ProSeries V2, and V300 monitors. It also fits Marquette Dash 2000 through 5000, Eagle and Eagle 1000, Solar 7000, 8000, 8000M, and i/9500 systems, Tram 451, TRAM modular, and x50SL-series modules, the PDM module, and CardioLab and MAC-Lab systems. Corometrics 128, 250, 250cx, and 259 monitors and the TRAM 450SL are supported, along with Masimo-equipped Datascope Accutorr, DPM, and Passport monitors and Bitmos sat-series oximeters. GE monitors were offered with Masimo, Nellcor Oxismart, Nellcor OxiMax, or TruSignal SpO2, and each requires matching sensors, so confirm your monitor’s SpO2 configuration before ordering.

Design and Construction

The hard-shell finger clip holds the emitter and detector in consistent alignment on adult fingers, making it well suited for spot checks and short-term continuous monitoring. The 9.8 ft (3.0 m) cable gives enough reach from the bedside or stretcher to a wall- or pole-mounted monitor without an extension. The sensor is reusable after cleaning and disinfection according to facility protocol and ships one per bag.

When to Replace Your GE Masimo Adult SpO2 Finger Sensor

Replace the sensor when the monitor reports “SpO2 sensor off,” “no sensor,” or sensor fault messages, when readings are erratic or the pleth waveform is weak on a well-perfused patient, or when the clip spring has weakened, the housing is cracked, the pad is torn, or the cable jacket is damaged near the clip or connector. Reusable clip sensors see heavy daily handling, so many facilities keep spares on each unit to avoid downtime.

Cross Reference and Interchange Part Numbers

This compatible Masimo SET adult finger clip SpO2 sensor, IPR Medical SKU SS-015RB-AF30, interchanges with Praymed PSA0025-L and PSA8025-L and Unimed U410-21MR. This one-piece sensor takes the place of a separate Masimo LNCS DCI adult finger sensor used with a GE 2027263-002 (Masimo LNC10-GE-LNCS) interconnect cable, combining both into a single direct-connect assembly. For GE monitors with Nellcor SpO2, see the compatible Oxismart version (IPR Medical SKU SS-015-AF30) or OxiMax version (SKU SS-015XC-AF30).

Why Source SpO2 Sensors from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring and infusion equipment. We carry compatible SpO2 sensors and adapter cables for Masimo, Nellcor Oxismart, Nellcor OxiMax, and TruSignal configurations of GE monitors, so biomedical teams can supply mixed fleets from one source at lower cost than OEM. Our team can help identify each monitor’s SpO2 technology and support your GE equipment with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for GE CARESCAPE, Dash, Solar, and Dinamap patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by GE Healthcare, Nellcor, Masimo, or any other manufacturer or supplier named on this page. GE Healthcare, Nellcor, Masimo, SET, OxiMax, OxiSmart, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.