IPR Medical

Spacelabs 700-0006-37 Compatible 5-Lead ECG Leadwire, Grabber/Pinch, AHA, Molded, 3.0 ft (0.9 m)

$60.00

The Spacelabs 700-0006-37 compatible 5-lead ECG leadwire (SKU EL-SLD5-90G-A) is a reusable aftermarket replacement (not OEM) with grabber/pinch electrode ends, limb and chest lead placement, a molded distal connector, AHA color coding, and a 3.0 ft (0.9 m) length.

Lead Count 5-Lead
Lead Placement Limb + Chest Lead
Electrode End Grabber/Pinch
Distal Connector Molded
Cable Length 3.0 ft / 35.4 in (0.9 m)
Replaces Spacelabs 700-0006-37

Works with: select Spacelabs models, including the 90367, 90492, and 93300, plus Elance Series and Ultraview SL entries. See the Specifications tab for the full list. Browse more ECG cables and leadwires.

IPR Medical buys, sells, repairs, and stocks parts for Spacelabs patient monitors and ECG leadwires. Call 855-477-8866 or email cs@iprmed.com.

SKU: EL-SLD5-90G-A Categories: , Tags: ,
Send In Spacelabs 700-0006-37 Compatible 5-Lead ECG Leadwire, Grabber/Pinch, AHA, Molded, 3.0 ft (0.9 m) for Repair

Specifications

Product Type Compatible Aftermarket Replacement (Not OEM)
IPR Part Number (SKU) EL-SLD5-90G-A
Replaces OEM Part Spacelabs 700-0006-37
Category Cables & Sensors > ECG/EKG
Product ECG Leadwire
Lead Count 5-Lead
Lead Placement Limb + Chest Lead
Electrode End Grabber/Pinch
AHA/IEC Code AHA (RA white, LA black, LL red, RL green, V brown)
Distal Connector Molded
Feature Shielded
Lead Type Spacelabs Molded Din-Style
Cable Length 3.0 ft / 35.4 in (0.9 m)
Intended Use Monitoring
Lifecycle Reusable
Packaging 1 per bag

Compatible Monitor Models

Manufacturer Compatible Models
Spacelabs 8100, 90309, 90367, 90367 Ultraview, 90369, 90369 Ultraview, 90492, 90496, 90496 Ultraview, 91220 mCare 300, 91369, 91496, 93300, Elance Series, Ultraview SL

Cross Reference / Interchange Part Numbers

Manufacturer / Supplier Part Number
Spacelabs 700-0006-37, 700-0010-01

IPR Medical buys, sells, repairs, and stocks parts for Spacelabs monitoring systems and their 5-lead ECG leadwires. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Spacelabs, or any other manufacturer or supplier named on this page. Spacelabs, Ultraview, Elance, mCare, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

What Is the Spacelabs 700-0006-37 Compatible 5-Lead ECG Leadwire?

The IPR Medical EL-SLD5-90G-A is a compatible aftermarket (not OEM) 5-lead ECG leadwire that replaces the Spacelabs 700-0006-37. Five grabber/pinch leads for limb and chest placement terminate in a molded distal connector, and the lead type is listed as Spacelabs Molded Din-Style. The leadwire is reusable, shielded, and 3.0 ft (0.9 m) long.


Compatible Monitor Models

Select Spacelabs models are listed for this leadwire, among them the 90367, 90492, and 93300. The list also takes in the Elance Series, Ultraview SL, and the 91220 mCare 300. Before you buy, check your model number against the full set of entries in the compatibility table on the Specifications tab.


Design and Construction

AHA color coding runs across all five leads: RA white, LA black, LL red, RL green, and V brown. Grabber/pinch ends attach to each electrode, and the distal end is a molded connector. Specifications list the leads as shielded and the length as 3.0 ft (0.9 m), about 35.4 in. Clean the reusable leadwire between patients per facility protocol; it comes packed one per bag.


When to Replace Your 5-Lead ECG Leadwire

Replace the leadwire if any grabber fails to close fully, if the molded connector is chipped or separating from the leads, or if insulation shows abrasion from bed rails and constant handling. On screen, a single lead that keeps reading off, or noise limited to one vector, points to a damaged conductor. Rotating a spare leadwire onto the same patient setup quickly confirms whether the old one is at fault.


Cross Reference and Interchange Part Numbers

Two Spacelabs numbers apply here: 700-0006-37, the part this leadwire replaces, and 700-0010-01, a further OEM cross-reference. They appear together under Spacelabs in the cross-reference table on the Specifications tab.


Why Source ECG Leadwires from IPR Medical?

IPR Medical’s business is buying, selling, repairing, and stocking parts for patient monitoring equipment and infusion pumps, and compatible 5-lead leadwires are part of that range. Every repair runs through our in-house technicians, at a company that is ISO 9001:2015-certified as an independent service organization. View more ECG cables and leadwires, or call 855-477-8866 to place an order.

IPR Medical buys, sells, repairs, and stocks parts for Spacelabs monitoring systems and their 5-lead ECG leadwires. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Spacelabs, or any other manufacturer or supplier named on this page. Spacelabs, Ultraview, Elance, mCare, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

Weight 1 lbs
Dimensions 8 × 8 × 6 in

Reviews

There are no reviews yet.