What Is the M2593A Compatible 5-Lead Telemetry ECG Leadwire?

The IPR Medical EL-TAA5-90G-A is a compatible aftermarket (not OEM) 5-lead telemetry ECG leadwire that replaces OEM part M2593A. Each of its limb and chest leads finishes in a grabber/pinch electrode end, and the leads follow AHA color coding over a 3.0 ft (0.9 m) length. Intended for telemetry use, it can be reused from patient to patient.

Compatible Monitor Models

Compatibility for the EL-TAA5-90G-A is listed model by model in the Compatible Monitor Models table on the Specifications tab. Check that table for your equipment before placing an order; our team is glad to help you confirm the match.

Design and Construction

This leadwire combines four limb leads and one chest lead, each with a grabber/pinch electrode end. AHA color coding (RA white, LA black, LL red, RL green, V brown) identifies the leads. The 3.0 ft (0.9 m) leadwire is shielded and terminates in a molded distal connector; match the lead type in the Specifications table to your existing leadwire before ordering. Clean it between patients according to facility protocol. Packaging is one per bag.

When to Replace Your Grabber 5-Lead Telemetry Leadwire

Look closely at each grabber: if one no longer grips the electrode firmly, the leadwire is due for replacement. Other warning signs include cracked or hardened insulation, kinks along the leads, bent pins, and a cracked connector housing. On the telemetry side, repeated leads-off alarms, a trace that turns noisy when the patient walks or turns, and intermittent signal loss all suggest wear. A quick swap with a known-good leadwire on the same transmitter shows whether the leadwire is the cause.

Cross Reference and Interchange Part Numbers

Numbers that interchange with this compatible telemetry leadwire include OEM part M2593A and OEM number 989803106341, and the full list, with aftermarket equivalents, appears in the Cross Reference / Interchange Part Numbers table on the Specifications tab.

Why Source Telemetry ECG Leadwires from IPR Medical?

When you buy from IPR Medical, you work with an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring equipment and infusion pumps. Repairs are completed in-house by our own technicians, and we can help you confirm the grabber telemetry leadwire that matches your system. Shop ECG cables and leadwires or call 855-477-8866 for orders, repairs, or parts.

IPR Medical buys, sells, repairs, and stocks parts for telemetry leadwires and the monitoring equipment they connect to. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, or any other manufacturer or supplier named on this page. Philips, Viridia, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.