IPR Medical

Philips M2592A Compatible 5-Lead Telemetry ECG Leadwire, Snap, AHA, Molded, 3.0 ft (0.9 m)

$80.00

The M2592A compatible 5-lead telemetry ECG leadwire (SKU EL-TAA5-90S-A) is a reusable aftermarket replacement (not OEM) with limb and chest leads, snap electrode ends, AHA color coding, and a 3.0 ft (0.9 m) length, intended for telemetry.

Lead Count 5-Lead
Electrode End Snap
AHA/IEC Code AHA
Lead Type Tele AA Twin-Pin
Intended Use Telemetry
Cable Length 3.0 ft (0.9 m)
Replaces Philips M2592A

Works with: the monitor models listed in the Specifications tab. Browse more ECG cables and leadwires.

IPR Medical buys, sells, repairs, and stocks parts for patient monitoring equipment and ECG leadwires. Call 855-477-8866 or email cs@iprmed.com.

SKU: EL-TAA5-90S-A Categories: , Tags: ,
Send In Philips M2592A Compatible 5-Lead Telemetry ECG Leadwire, Snap, AHA, Molded, 3.0 ft (0.9 m) for Repair

Specifications

Product Type Compatible Aftermarket Replacement (Not OEM)
IPR Part Number (SKU) EL-TAA5-90S-A
Replaces OEM Part Philips M2592A
Category Cables & Sensors > ECG/EKG
Product Telemetry ECG Leadwire
Lead Count 5-Lead
Lead Placement Limb + Chest Lead
Electrode End Snap
AHA/IEC Code AHA (RA white, LA black, LL red, RL green, V brown)
Distal Connector Molded
Feature Shielded
Lead Type Tele AA Twin-Pin
Cable Length 3.0 ft (0.9 m)
Intended Use Telemetry
Lifecycle Reusable
Packaging 1 per bag

Compatible Monitor Models

Manufacturer Compatible Models
Philips M2600A, M2601A, M2636A, Viridia M2600A

Cross Reference / Interchange Part Numbers

Manufacturer / Supplier Part Number
Philips M2592A, 989803106331
Sage L08-05T-29S
Tenacore 80900-30-5ATC
Unimed AT5-90S

IPR Medical buys, sells, repairs, and stocks parts for telemetry ECG leadwires and the patient monitoring systems they support. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, or any other manufacturer or supplier named on this page. Philips, Viridia, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

What Is the M2592A Compatible 5-Lead Telemetry ECG Leadwire?

The IPR Medical EL-TAA5-90S-A is a compatible aftermarket (not OEM) 5-lead telemetry ECG leadwire that replaces OEM part M2592A. Designed for telemetry use, this reusable leadwire brings five limb and chest leads together with snap electrode ends, AHA color coding, and a 3.0 ft (0.9 m) cable length.


Compatible Monitor Models

Every telemetry model this leadwire is listed for appears by name in the Compatible Monitor Models table on the Specifications tab. Check your telemetry system against that list before ordering; our team can also confirm the match by phone.


Design and Construction

Five leads, four limb leads and one chest lead, end in snap connections and are color coded to the AHA standard (RA white, LA black, LL red, RL green, V brown). Shielding is listed as a feature, the distal connector is molded, and the overall length is 3.0 ft (0.9 m). Its lead type is shown in the Specifications table so you can match it to the leadwire you use today. It is reusable, can be cleaned between patients per facility protocol, and comes one per bag.


When to Replace Your 5-Lead Telemetry ECG Leadwire

Telemetry patients are often up and moving, so their leadwires flex constantly and deserve regular inspection. Replace this leadwire when a snap loosens on the electrode stud, when the insulation cracks or kinks, or when the connector has bent pins or a cracked housing. Frequent leads-off alarms at the central station, a noisy or drifting trace, and dropouts that occur as the patient moves also point to a worn leadwire. Trying a known-good leadwire with the same transmitter helps isolate the fault.


Cross Reference and Interchange Part Numbers

In addition to OEM part M2592A, this compatible telemetry leadwire cross-references to OEM number 989803106331. The remaining interchange numbers are listed in the Cross Reference / Interchange Part Numbers table on the Specifications tab.


Why Source Telemetry ECG Leadwires from IPR Medical?

As an ISO 9001:2015-certified independent service organization, IPR Medical buys, sells, repairs, and stocks parts for patient monitoring equipment and infusion pumps. Our technicians handle repairs in-house, and our team can help you identify the telemetry leadwire that fits your system. Browse ECG cables and leadwires or call 855-477-8866 for orders, repairs, or parts.

IPR Medical buys, sells, repairs, and stocks parts for telemetry ECG leadwires and the patient monitoring systems they support. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, or any other manufacturer or supplier named on this page. Philips, Viridia, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

Weight 1 lbs
Dimensions 8 × 8 × 6 in

Reviews

There are no reviews yet.