Philips 989803152071 Compatible 5-Lead Telemetry ECG Leadwire, Snap, AHA, Molded, 3.0 ft (0.9 m)
The 989803152071 compatible 5-lead telemetry ECG leadwire (SKU EL-TPH5-90S-A) is a reusable aftermarket replacement (not OEM) with snap electrode ends, AHA color coding, limb and chest leads, and a 3.0 ft (0.9 m) length.
| Lead Count | 5-Lead |
| Electrode End | Snap |
| Lead Placement | Limb + Chest Lead |
| Distal Connector | Molded |
| Cable Length | 3.0 ft (0.9 m) |
| Replaces | Philips 989803152071 |
Works with: the monitor models listed in the Specifications tab. Browse more ECG cables and leadwires.
IPR Medical buys, sells, repairs, and stocks parts for patient monitoring and telemetry equipment. Call 855-477-8866 or email cs@iprmed.com.
Specifications
| Product Type | Compatible Aftermarket Replacement (Not OEM) |
| IPR Part Number (SKU) | EL-TPH5-90S-A |
| Replaces OEM Part | Philips 989803152071 |
| Category | Cables & Sensors > ECG/EKG |
| Product | Telemetry ECG Leadwire |
| Lead Count | 5-Lead |
| Lead Placement | Limb + Chest Lead |
| Electrode End | Snap |
| AHA/IEC Code | AHA (RA white, LA black, LL red, RL green, V brown) |
| Distal Connector | Molded |
| Feature | Shielded |
| Lead Type | Tele IntelliVue |
| Cable Length | 3.0 ft (0.9 m) |
| Intended Use | Telemetry |
| Lifecycle | Reusable |
| Packaging | 1 per bag |
Compatible Monitor Models
| Manufacturer | Compatible Models |
| Philips | IntelliVue 862108, M2600B, M2601B, M2601B Viridia, M4840A, M4841A, TRx M4841A, TRx+ M4841A |
Cross Reference / Interchange Part Numbers
| Manufacturer / Supplier | Part Number |
| Philips | 989803137241, 989803152071, 989803133871 |
| AMC | LW-2090S29/5AT |
| Curbell | 19890, 8939, LDW-05AU-29AS-0000, RLW-05AU-34AS-0000 |
| Sage | L01-05-29SC |
| Unimed | HT5-90S |
IPR Medical buys, sells, repairs, and stocks parts for ECG telemetry leadwires, cables, and patient monitoring equipment. Contact us at 855-477-8866 or cs@iprmed.com.
Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, or any other manufacturer or supplier named on this page. Philips, IntelliVue, Viridia, TRx, TRx+, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.
What Is the 989803152071 Compatible 5-Lead Telemetry ECG Leadwire?
The IPR Medical EL-TPH5-90S-A is a compatible aftermarket (not OEM) 5-lead telemetry ECG leadwire that replaces OEM part 989803152071. With snap electrode ends, limb and chest lead placement, and AHA color coding, it is a reusable 3.0 ft (0.9 m) leadwire made for telemetry ECG monitoring. You will find its lead type listed in the Specifications table.
Compatible Monitor Models
Compatibility for the EL-TPH5-90S-A is documented model by model in the Compatible Monitor Models table on the Specifications tab, where some models are shown under more than one name as listed for this part. Verify your equipment model against that table before placing an order. Our team can also confirm compatibility by phone.
Design and Construction
This 5-lead leadwire pairs limb and chest leads with snap ends that connect to snap electrodes. Following AHA conventions, the leads are coded RA white, LA black, LL red, RL green, and V brown. It is listed as shielded, the distal connector is molded, and the total length measures 3.0 ft (0.9 m). The leadwire is reusable; clean and inspect it between patients according to facility protocol. One leadwire is packed per bag.
When to Replace Your 5-Lead Telemetry ECG Leadwire
Snaps that feel loose or pop off electrodes, insulation that is cracked or kinked, and a connector with bent pins or a broken housing are all reasons to take the leadwire out of service. Watch the waveform as well: a baseline that drifts or turns noisy, repeated lead-off alarms, or a signal that drops out when the leads are moved can point to wire damage inside the jacket. Swapping in a known-good leadwire is a quick way to tell whether the leadwire or the equipment is at fault.
Cross Reference and Interchange Part Numbers
In addition to OEM part 989803152071, OEM numbers 989803137241 and 989803133871 cross-reference to this compatible leadwire. The Cross Reference / Interchange Part Numbers table on the Specifications tab lists the aftermarket interchange numbers.
Why Source ECG Leadwires from IPR Medical?
IPR Medical, an ISO 9001:2015-certified independent service organization, buys, sells, repairs, and stocks parts for patient monitoring equipment and infusion pumps. Because our technicians service telemetry and bedside monitoring equipment in-house, they can help you match the right leadwire to your system. Order from our ECG cables and leadwires category, or call 855-477-8866 for repairs, parts, or quotes.
IPR Medical buys, sells, repairs, and stocks parts for ECG telemetry leadwires, cables, and patient monitoring equipment. Contact us at 855-477-8866 or cs@iprmed.com.
Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, or any other manufacturer or supplier named on this page. Philips, IntelliVue, Viridia, TRx, TRx+, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 8 × 6 in |
Reviews
There are no reviews yet.



















