IPR Medical

GE Healthcare Compatible Adult Finger Clip SpO2 Sensor, Nellcor OxiMax, Hard Shell, Reusable, 9.8 ft (3.0 m)

$90.00

This GE OxiMax adult SpO2 sensor is a reusable, aftermarket hard-shell finger clip sensor (not OEM) for GE and Marquette monitors configured with Nellcor OxiMax SpO2, built to OEM fit, form, and function.

Sensor Type Finger Clip, Hard Shell
Patient Size Adult
SpO2 Technology Nellcor OxiMax
Cable Length 9.8 ft (3.0 m)
Lifecycle Reusable

Works with: OxiMax-equipped GE CARESCAPE B650/B850/V100, Procare B40, Dash 2500–5000, Solar 8000/8000M and i/9500, Tram modules, and Corometrics 128/250/259 monitors. See the Specifications tab for the full list. Browse more SpO2 cables and sensors.

IPR Medical buys, sells, repairs, and stocks parts for GE patient monitoring equipment. Call 855-477-8866 or email cs@iprmed.com.

SKU: SS-015XC-AF30 Categories: ,
Send In GE Healthcare Compatible Adult Finger Clip SpO2 Sensor, Nellcor OxiMax, Hard Shell, Reusable, 9.8 ft (3.0 m) for Repair
Product Type Compatible Replacement (Aftermarket, Not OEM)
IPR Medical SKU SS-015XC-AF30
Sensor Type Finger Clip, Hard Shell
Patient Size Adult
SpO2 Technology Nellcor OxiMax
Cable Length 9.8 ft (3.0 m)
Lifecycle Reusable
Packaging 1 per Bag

Compatible Monitor Models

Monitor must be configured with Nellcor OxiMax SpO2.

Manufacturer / Series Compatible Models
GE Healthcare CARESCAPE B650, B850, V100
GE Healthcare / Marquette Dash 2500, 3000, 4000, 5000; Dash Series; Eagle; Procare B40
GE Healthcare / Marquette SOLAR, Solar 8000, Solar 8000M; i/9500
GE Healthcare / Marquette Tram 451, TRAM Modular, x50SL Series; PDM Module
GE Healthcare / Corometrics 128, 250, 250cx, 259; TRAM 450SL

Cross Reference / Interchange Part Numbers

Manufacturer / Supplier Part Number
Praymed PSA0122-L, PSA0444-L
Unimed U410-21XP, U410-21P

IPR Medical buys, sells, repairs, and stocks parts for GE CARESCAPE, Dash, Solar, and Corometrics patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Nellcor, GE Healthcare, Masimo, or any other manufacturer or supplier named on this page. Nellcor, GE Healthcare, Masimo, OxiMax, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

What Is the GE Compatible OxiMax Adult Finger Clip SpO2 Sensor?

This GE Healthcare compatible adult finger clip SpO2 sensor is a reusable, aftermarket pulse oximetry sensor for GE and Marquette monitors configured with Nellcor OxiMax SpO2. It combines a hard-shell adult finger clip and a 9.8 ft (3.0 m) cable in a single direct-connect sensor, so no separate adapter cable is needed. It is a compatible replacement, not an original GE or Nellcor part, and it is built to OEM fit, form, and function.


Compatible Monitor Models

This compatible sensor is confirmed for use with OxiMax-equipped GE CARESCAPE B650, B850, and V100 monitors and the Procare B40. It also fits Marquette Dash 2500, 3000, 4000, and 5000 monitors, Eagle monitors, Solar, Solar 8000, 8000M, and i/9500 systems, Tram 451, TRAM modular, and x50SL-series modules, and the PDM module. Corometrics 128, 250, 250cx, and 259 monitors and the TRAM 450SL are also supported. GE monitors were offered with Nellcor OxiMax, Nellcor Oxismart, Masimo, or TruSignal SpO2, and each requires matching sensors, so confirm your monitor’s SpO2 configuration before ordering.


Design and Construction

The hard-shell finger clip holds the emitter and detector in consistent alignment on adult fingers, making it well suited for spot checks and short-term continuous monitoring. The 9.8 ft (3.0 m) cable gives enough reach from the bedside or stretcher to a wall- or pole-mounted monitor without an extension. The sensor is reusable after cleaning and disinfection according to facility protocol and ships one per bag.


When to Replace Your GE OxiMax Adult SpO2 Finger Sensor

Replace the sensor when the monitor reports “SpO2 sensor off,” “no sensor,” or sensor fault messages, when readings are erratic or the pleth waveform is weak on a well-perfused patient, or when the clip spring has weakened, the housing is cracked, the pad is torn, or the cable jacket is damaged near the clip or connector. Reusable clip sensors see heavy daily handling, so many facilities keep spares on each unit to avoid downtime.


Cross Reference and Interchange Part Numbers

This compatible Nellcor OxiMax adult finger clip SpO2 sensor, IPR Medical SKU SS-015XC-AF30, interchanges with Praymed PSA0122-L and PSA0444-L and Unimed U410-21XP and U410-21P. This one-piece sensor takes the place of a separate Nellcor OxiMax adult finger sensor, such as the Nellcor DS-100A, used with a GE 2021406-001 interconnect cable, combining both into a single direct-connect assembly. For GE monitors with Nellcor Oxismart SpO2, see the compatible Oxismart version, IPR Medical SKU SS-015-AF30.


Why Source SpO2 Sensors from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring and infusion equipment. We carry compatible SpO2 sensors and adapter cables for Nellcor OxiMax, Nellcor Oxismart, Masimo, and TruSignal configurations of GE monitors, so biomedical teams can supply mixed fleets from one source at lower cost than OEM. Our team can help identify each monitor’s SpO2 technology and support your GE equipment with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for GE CARESCAPE, Dash, Solar, and Corometrics patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Nellcor, GE Healthcare, Masimo, or any other manufacturer or supplier named on this page. Nellcor, GE Healthcare, Masimo, OxiMax, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

Weight 1 lbs
Dimensions 8 × 8 × 6 in

Reviews

There are no reviews yet.