What Is the GE 2021406-001 Compatible SpO2 Adapter Cable?

The GE Healthcare 2021406-001 compatible SpO2 adapter cable is a reusable, aftermarket extension cable that connects Nellcor OxiMax pulse oximetry sensors to GE monitors equipped with Nellcor OxiMax SpO2. OxiMax is Nellcor’s newer sensor platform, which stores calibration data in each sensor. That means OxiMax-equipped monitors need an OxiMax-compatible cable rather than an older Oxismart-style cable. It is a compatible replacement, not an original GE part, and it is built to the same fit, form, and function as the OEM 2021406-001 cable.

Compatible Monitor Models

This compatible cable is confirmed for use with OxiMax-equipped GE CARESCAPE B450, B650, B850, and V100 monitors, Dinamap B105, B105M, B105P, B125, B125M, B125P, and B155M monitors, and the Procare B40. It also fits Marquette Dash 2000, 2500, 3000, 4000, and 5000 monitors, Solar 8000, 8000M, and i/9500 systems, Tram 451, TRAM 450SL, and TRAM modular x50SL-series modules, the PDM module, and Eagle monitors, as well as Corometrics 128, 250, 250cx, and 259 monitors. GE monitors were offered with Masimo, Nellcor Oxismart, or Nellcor OxiMax SpO2, and each uses its own cable, so confirm your monitor’s SpO2 configuration before ordering.

Design and Construction

The cable runs 9.8 ft (3.0 m), a longer reach that suits ICU, OR, and NICU layouts where the monitor sits on a boom or wall mount away from the patient. The sensor end accepts Nellcor OxiMax sensors in adult, pediatric, infant, and neonatal sizes, in both disposable and reusable styles. The cable is reusable after cleaning according to facility protocol and ships one per bag.

When to Replace Your GE OxiMax SpO2 Adapter Cable

Longer SpO2 cables are more likely to be stepped on, pinched, or kinked. Replace the cable when the monitor reports “SpO2 sensor off,” “no sensor,” or sensor/cable fault messages with a known-good OxiMax sensor, when saturation or pleth readings drop out as the cable is moved, or when you find a cracked jacket, a loose sensor latch, or damaged connector pins. Swapping in a known-good cable and sensor quickly identifies which component is at fault.

Cross Reference and Interchange Part Numbers

This compatible Nellcor OxiMax SpO2 adapter cable, IPR Medical SKU SA-015X-30, cross-references to GE Healthcare part numbers 2021406-001, 2025350-001, and 2021406-002 (the OEM 2021406-002 is a 4 ft cable). It also interchanges with Caremed SZ30X-21 and 131050032, Curbell 5590 and CB-A400-3300, Elite Biomedical 91018 EBS, Pacific Medical NXMQ101 and NXMQ4526, Sage Services Group E02X-36M, and Tenacore TE2425. Some of these numbers differ in length, so confirm the 9.8 ft (3.0 m) length suits your setup. For monitors with Nellcor Oxismart or Masimo SpO2, IPR Medical also stocks the compatible GE 2006644-001 and 2027263-002 cables.

Why Source SpO2 Cables from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring and infusion equipment. We carry compatible SpO2 cables for Masimo, Nellcor Oxismart, and Nellcor OxiMax configurations of GE monitors, so biomedical teams can supply mixed fleets from one source at lower cost than OEM. Our team can help identify each monitor’s SpO2 technology and support your GE equipment with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for GE CARESCAPE, Dash, Solar, and Dinamap patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Nellcor, GE Healthcare, Masimo, or any other manufacturer or supplier named on this page. Nellcor, GE Healthcare, Masimo, OxiMax, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.