What Is the GE TS-G3 Compatible SpO2 Adapter Cable?

The GE Healthcare TS-G3 compatible SpO2 adapter cable is a reusable, aftermarket interconnect cable that links GE TruSignal pulse oximetry sensors to GE and Datex-Ohmeda monitors configured with TruSignal SpO2. It is a compatible replacement, not an original GE part, and it is built to OEM fit, form, and function.

Compatible Monitor Models

This compatible cable is confirmed for use with TruSignal-equipped GE CARESCAPE B125, B650, and V100 monitors, GE ProCare B20 and B40 monitors, and the Corometrics 259 fetal monitor. It also fits Datex-Ohmeda S/5 monitors with E-series modules and the E-PRESTN parameter module. GE monitors have been offered with TruSignal, Masimo, or Nellcor SpO2, and each technology uses its own cable, so confirm your monitor’s SpO2 configuration before ordering.

Design and Construction

The cable runs 7.9 ft (2.4 m), a practical length for bedside, transport, and procedural setups. It connects the monitor’s TruSignal SpO2 input to GE TruSignal sensors, including reusable finger sensors and single-patient-use adhesive sensors. The cable is reusable after cleaning according to facility protocol and ships one per bag.

When to Replace Your GE TruSignal SpO2 Adapter Cable

Replace the cable when the monitor shows “SpO2 sensor off,” “no probe,” or cable/sensor fault messages with a known-good TruSignal sensor, when saturation or pleth readings drop out as the cable is moved, or when you find a cracked jacket, a loose sensor latch, or bent or corroded connector pins. Swapping in a known-good cable and sensor quickly identifies which component is at fault.

Cross Reference and Interchange Part Numbers

This compatible TruSignal SpO2 adapter cable, IPR Medical SKU SA-016-24TS, cross-references to GE Healthcare / Datex-Ohmeda part number TS-G3. It also interchanges with Pacific Medical NXDX4580 and Unimed U708-111. The OEM TS-G3 is a longer cable, about 10 ft (3.0 m), so confirm the 7.9 ft (2.4 m) length suits your setup.

Why Source SpO2 Cables from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring and infusion equipment. We carry compatible SpO2 cables for TruSignal, Masimo, Nellcor Oxismart, and Nellcor OxiMax configurations of GE monitors, so biomedical teams can supply mixed fleets from one source at lower cost than OEM. Our team can help identify each monitor’s SpO2 technology and support your GE equipment with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for GE CARESCAPE, ProCare, and Datex-Ohmeda patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by GE Healthcare, Nellcor, Masimo, or any other manufacturer or supplier named on this page. GE Healthcare, Nellcor, Masimo, OxiMax, OxiSmart, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.