What Is the Draeger MP00953 Compatible NIBP Air Hose?

The Draeger MP00953 compatible NIBP air hose is a reusable, aftermarket replacement for Draeger’s adult NBP connecting hose. It carries air between the monitor’s blood pressure pump and a single-tube cuff on the patient’s arm or leg. MP00953 is Draeger’s newer-style part number for this 3.7 m hose, and it often appears on current work orders and requisitions in place of older 1275 275 references. It is a compatible replacement, not an original Draeger part, and it is built to the same fit, form, and function as the OEM hose.

Compatible Monitor Models

This compatible hose is confirmed for use with the Draeger Infinity Delta, Infinity Gamma, Infinity Kappa, and Infinity Vista patient monitors, along with the SC 6000, SC 7000, SC 8000, and SC 9000. Each of these monitors uses the same Draeger single-tube NIBP inlet. The hose is intended for adult and pediatric single-tube cuffs. Neonatal measurements need a dedicated neonatal hose sized for smaller cuff volumes.

Design and Construction

At 12 ft (3.7 m), this hose has the extended reach needed where monitors are mounted on booms, walls, or anesthesia machines some distance from the patient. The copper-and-nylon Draeger mono plug seats firmly in the monitor’s NIBP inlet, and the metal bayonet quick-disconnect at the far end locks onto the cuff so it won’t pull loose during repositioning or transport. The PVC tubing, with an inner diameter of about 0.12 in (3.1 mm) and an outer diameter of about 0.23 in (5.8 mm), maintains steady airflow for consistent inflation and deflation timing and resists kinks where it drapes over bed rails. The hose is latex-free, non-sterile, weighs about 0.7 lbs, and ships one per bag.

When to Replace Your Draeger MP00953 NIBP Hose

Most NIBP hose failures come down to slow air leaks that the monitor reports as cuff errors. Common signs are extended inflation times, frequent re-measurement attempts, “leak” or “NBP measurement failed” messages, and mmHg values that drift from a manual auscultation check. Physical wear shows up as tubing that has hardened or cracked near the connectors, a bayonet fitting that has lost its locking action, or a mono plug that no longer seats snugly. Testing with a known-good cuff and an NIBP simulator isolates the hose quickly, and replacing a worn hose is usually faster and cheaper than pulling the monitor for service.

Cross Reference and Interchange Part Numbers

This compatible NIBP air hose, IPR Medical SKU BPH-AS37-18-43, cross-references to Draeger part number MP00953 and to the earlier Draeger references 1275 275 E07 and 1275 275 EH5OU. It also interchanges with Sage Services Group part number H09-40-15. Materials managers and purchasing staff can use any of these numbers to confirm the match against existing inventory, work orders, or requisitions. Contact IPR Medical if you are replacing a part number not listed here and need help confirming compatibility.

Why Source NIBP Hoses from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring and infusion equipment. Our compatible hoses, cables, and sensors help biomedical departments control accessory spending without giving up OEM fit and function. Whether you are restocking NIBP hoses for an Infinity Delta fleet or supporting legacy SC series monitors, our team can confirm the right part and supply it, and we back your equipment with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for the Draeger Infinity Delta, Infinity Kappa, and SC series monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Draeger, or any other manufacturer or supplier named on this page. Draeger, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.