IPR Medical

  • Masimo 2318 (LNCS Pdtx-3) Compatible Pediatric Adhesive SpO2 Sensor, Disposable, 3.0 ft (0.9 m), Box of 20

    $180.00

    The Masimo 2318 (LNCS Pdtx-3) compatible SpO2 sensor (SKU SSD-005RB-W09P) is a disposable, aftermarket replacement (not OEM) pediatric adhesive sensor for Masimo SET-equipped monitors, built to match the original’s fit, form, and function.

    Sensor Type
    Non-Woven Adhesive (Finger)

    Patient Size
    Pediatric, 22–110 lbs (10–50 kg)

    Connector
    Masimo LNCS, Male 9-Pin

    SpO2 Technology
    Masimo SET (LNCS)

    Cable Length
    3.0 ft (0.9 m)

    Lifecycle
    Disposable, Latex-Free

    Packaging
    20 per Box

    Replaces
    Masimo 2318, 1860, Physio-Control 11171-000020, and more

    Works with: Masimo Radical-7, Rad-5, Rad-8, and Rad-57; Masimo SET-equipped Mindray/Datascope Passport and Spectrum, GE Dash, Solar, and CARESCAPE, Philips IntelliVue, Physio-Control Lifepak 11 through 20e, Zoll E, M, R, and X Series, Draeger Infinity, and Welch Allyn Propaq and Spot Vital Signs monitors. Some monitors require an LNCS patient cable. See the Specifications tab for the full list. Browse more SpO2 cables and sensors.

    IPR Medical buys, sells, repairs, and stocks parts for Masimo patient monitoring equipment. Call 855-477-8866 or email cs@iprmed.com.

  • GE Healthcare 700044-203 Compatible EKG Patient Interface Cable for AM4 Module, 4.3 ft (1.3 m)

    $180.00

    The GE Healthcare 700044-203 compatible EKG patient interface cable (SKU EKT-GE-AM4-S) is a reusable, aftermarket replacement (not OEM) that connects the AM4 or AM5 acquisition module to a GE Marquette electrocardiograph or stress system and carries the 12-lead ECG signal from the module to the host, built to match the original’s fit, form, and function.

    Cable Type
    EKG Patient Interface (Module-to-Host) Cable

    Acquisition Module
    GE AM4 (also fits AM5)

    Cable Length
    4.3 ft (1.3 m)

    Lifecycle
    Reusable

    Packaging
    1 per Bag

    Replaces
    GE Healthcare / Marquette 700044-203

    Works with: GE Marquette MAC 6, MAC 12, MAC 15, MAC PC, CASE 12, CASE 15, and CENTRA systems using the AM4 or AM5 acquisition module. Browse more ECG/EKG cables and accessories from IPR Medical.

    IPR Medical buys, sells, repairs, and stocks parts for GE diagnostic ECG and patient monitoring equipment. Call 855-477-8866 or email cs@iprmed.com.

  • GE Healthcare 2016560-003 Compatible EKG Patient Interface Cable for CAM 14 Module, 15 ft (4.6 m)

    $180.00

    The GE Healthcare 2016560-003 compatible EKG patient interface cable (SKU EKT-GE-CAM14) is a reusable aftermarket replacement (not OEM) for GE’s long CAM 14 patient cable that connects the CAM 14 acquisition module to a GE MAC resting ECG cart and carries the digitized 12-lead signal from the module to the cart.

    Cable Type
    EKG Patient Interface (Module-to-Cart) Cable

    Acquisition Module
    GE CAM 14

    Cable Length
    15 ft (4.6 m)

    Lifecycle
    Reusable

    Packaging
    1 per Bag

    Replaces
    GE Healthcare / Marquette 2016560-003, 2016560-002, 2104403-002, 2104403-003, 700657-002, 700657-003

    Works with: GE Marquette CAM 14 module on MAC 5000, MAC 5500, MAC 5500 HD, and CASE systems. Browse more ECG/EKG cables and accessories from IPR Medical.

    IPR Medical buys, sells, repairs, and stocks parts for GE diagnostic ECG and patient monitoring equipment. Call 855-477-8866 or email cs@iprmed.com.

  • GE Healthcare 2016560-001 Compatible EKG Patient Interface Cable for CAM 14 Module, Coiled, 4.3 ft (1.3 m)

    $180.00

    The GE Healthcare 2016560-001 compatible EKG patient interface cable (SKU EKT-GE-CAM14-S) is a reusable, aftermarket replacement (not OEM) coiled cable that links the CAM 14 acquisition module to a GE MAC resting ECG system, built to match the fit, form, and function of the original CAM 14 coiled patient cable.

    Cable Type
    EKG Patient Interface (Module-to-Cart) Cable

    Acquisition Module
    GE CAM 14

    Cable Style
    Coiled

    Cable Length
    4.3 ft (1.3 m)

    Lifecycle
    Reusable

    Packaging
    1 per Bag

    Replaces
    GE Healthcare / Marquette 2016560-001, GE Healthcare 2104403-001, 700657-001, E9001YT

    Works with: the GE Marquette CAM 14 acquisition module on GE MAC 5000, MAC 5500, MAC 5500 HD, and CASE systems. Browse more ECG/EKG cables and accessories from IPR Medical.

    IPR Medical buys, sells, repairs, and stocks parts for GE diagnostic ECG and patient monitoring equipment. Call 855-477-8866 or email cs@iprmed.com.

  • -33%
    Quick View

    Masimo 2320 (LNCS Neo-3) Compatible Neonatal/Adult Adhesive SpO2 Sensor, Disposable, 3.0 ft (0.9 m), Box of 20

    Original price was: $269.00.Current price is: $179.00.

    The Masimo 2320 (LNCS Neo-3) compatible SpO2 sensor (SKU SSD-005RB-W09AN) is a disposable, aftermarket replacement (not OEM) adhesive sensor for Masimo SET-equipped monitors, built to match the original’s fit, form, and function. One sensor covers neonates at the foot and adults at the finger.

    Sensor Type
    Non-Woven Adhesive

    Patient Size
    Neonatal <6.6 lbs (<3 kg) or Adult >88 lbs (>40 kg)

    Connector
    Masimo LNCS

    SpO2 Technology
    Masimo SET (LNCS)

    Cable Length
    3.0 ft (0.9 m)

    Lifecycle
    Disposable, Single-Patient Use

    Packaging
    20 per Box

    Replaces
    Masimo 2320, 2329, Physio-Control 11171-000028, Zoll 8000-0323, and more

    Works with: Masimo Radical-7, Rad-5, Rad-8, and Rad-57; Masimo SET-equipped Mindray/Datascope Passport and Spectrum, GE Dash, Solar, and CARESCAPE, Philips IntelliVue, Physio-Control Lifepak 11 through 20e, Zoll E, M, R, and X Series, Draeger Infinity, Welch Allyn Propaq and Spot Vital Signs monitors, and the Datex-Ohmeda Giraffe Infant Warmer. Some monitors require an LNCS patient cable. See the Specifications tab for the full list. Browse more SpO2 cables and sensors.

    IPR Medical buys, sells, repairs, and stocks parts for Masimo patient monitoring equipment. Call 855-477-8866 or email cs@iprmed.com.

  • GE Corometrics 1591AAO (1591AA0) Compatible Fetal Leg Plate (DECG) Cable, Qwik Connect Plus, 8.2 ft (2.5 m)

    $150.00

    The GE Corometrics 1591AAO (1591AA0) compatible fetal leg plate (DECG) cable (SKU FDELA-GE01-SGE) is a reusable aftermarket replacement (not OEM) that connects a Qwik Connect Plus fetal spiral electrode to the fetal monitor for direct fetal ECG (DECG) heart rate monitoring during labor.

    Cable Type
    Fetal Leg Plate / DECG (FSE) Cable

    Spiral Electrode Type
    Qwik Connect Plus

    Measurement
    Direct Fetal ECG (DECG) / Fetal Heart Rate

    Monitor-End Connector
    Rectangular

    Cable Length
    8.2 ft (2.5 m)

    Lifecycle
    Reusable

    Replaces
    GE Healthcare / Corometrics 1591AAO (1591AA0), 2109005-001

    Works with: GE Corometrics 120 Series fetal monitors. Browse more fetal monitoring accessories from IPR Medical.

    IPR Medical buys, sells, repairs, and stocks parts for GE Corometrics fetal monitors and transducers. Call 855-477-8866 or email cs@iprmed.com.

  • GE Corometrics 1590AAO Compatible Fetal Leg Plate (DECG) Cable, Qwik Connect Plus, 8.2 ft (2.5 m)

    $150.00

    The GE Corometrics 1590AAO compatible fetal leg plate (DECG) cable (SKU FDELA-GE02-SGE) is a reusable, aftermarket replacement (not OEM) that connects a Qwik Connect Plus fetal spiral electrode to the fetal monitor for direct fetal ECG (DECG) heart rate monitoring during labor, built to match the fit, form, and function of the original Qwik Connect Plus leg plate cable.

    Cable Type
    Fetal Leg Plate / DECG (FSE) Cable

    Use With
    Qwik Connect Plus Spiral Electrodes

    Measurement
    Direct Fetal ECG (DECG) / Fetal Heart Rate

    Cable Length
    8.2 ft (2.5 m)

    Lifecycle
    Reusable

    Packaging
    1 per Bag

    Replaces
    GE Healthcare / Corometrics 1590AAO, 2109004-001

    Works with: GE Corometrics 115, 116, 118, 120 Series, 150, 151, 170, 250cx, and 259cx fetal monitors. Browse more fetal monitoring accessories from IPR Medical.

    IPR Medical buys, sells, repairs, and stocks parts for GE Corometrics fetal monitors and transducers. Call 855-477-8866 or email cs@iprmed.com.

  • Baxter InfusO.R. Smart Labels | Anesthesia Drug Library Labels

    $125.00

    The Baxter InfusO.R. Smart Label is a magnetically coded drug-specific label that attaches to the front panel of the InfusO.R. syringe infusion pump and reconfigures the pump for a specific intravenous anesthetic agent. Each label redefines the pump’s rotary input switches with the correct delivery units, infusion rates, and bolus options for the indicated drug, color-coded by drug class to the ASTM Drug Label Color Standard. IPR Medical stocks Smart Labels across the full InfusO.R. drug library, including narcotics, muscle relaxants, vasopressors, hypotensive agents, induction agents, and General mL/hr labels.

    Compatible Pump
    Baxter InfusO.R. Syringe Pump (2L3100, 2L3100R1)

    Label System
    Magnetically coded, ten-position library (L01–L10)

    Drug Classes Covered
    Narcotics, muscle relaxants, vasopressors, hypotensive agents, induction agents, other

    Color Coding
    ASTM Drug Label Color Standard

    Function
    Redefines pump rotary switches with drug-specific delivery units and rates

    Available Stock
    Multiple individual drug labels; contact IPR Medical for current inventory and pricing per label

    IPR Medical buys, sells, repairs, and stocks parts for the Baxter InfusO.R. Smart Labels. Contact us at 855-477-8866 or cs@iprmed.com.

    Also available from IPR Medical:
    Baxter InfusO.R. Syringe Pump — the host pump the Smart Labels are designed for  | 
    Baxter Auto Syringe AS50 — anesthesia and critical-care syringe pump with onboard drug library

  • Spacelabs 700-0031-00 Compatible 2-Channel Temperature Adapter Cable, for 400 Series Probes, 1.0 ft (0.3 m)

    $125.00

    The Spacelabs 700-0031-00 compatible 2-channel temperature adapter cable (SKU TA-SL-2AD03) is a reusable aftermarket replacement (not OEM) with a 1.0 ft (0.3 m) length, for use with 400 Series temperature probes.

    Product
    Temperature Adapter Cable

    Channel
    2-Channel

    Used With
    400 Series Probes

    Cable Length
    1.0 ft (0.3 m)

    Lifecycle
    Reusable

    Replaces
    Spacelabs 700-0031-00

    Works with: Spacelabs equipment that uses OEM part 700-0031-00. Contact us to confirm fit for your monitor model before ordering. Browse more temperature probes and cables.

    IPR Medical buys, sells, repairs, and stocks parts for temperature monitoring accessories and patient monitors. Call 855-477-8866 or email cs@iprmed.com.

  • Nihon Kohden JP-900P Compatible IBP Adapter Cable, for BD Transducers, 13.1 ft (4.0 m)

    $125.00

    The Nihon Kohden JP-900P compatible IBP adapter cable (SKU IBP-NKB-BD40) is a reusable aftermarket replacement (not OEM) with a 13.1 ft (4.0 m) length, for use with BD transducers.

    Product
    IBP Adapter Cable

    Transducer Brand
    BD

    Cable Length
    13.1 ft (4.0 m)

    Lifecycle
    Reusable

    Replaces
    Nihon Kohden JP-900P

    Works with: select Nihon Kohden BSM, Life Scope, PVM, and TEC models. See the Specifications tab for the full list. Browse more IBP cables and accessories.

    IPR Medical buys, sells, repairs, and stocks parts for patient monitors and IBP accessories. Call 855-477-8866 or email cs@iprmed.com.

  • GE Healthcare 2016998-001 Compatible 2-Channel Temperature Adapter Cable, 400 Series, 1 ft (0.3 m)

    $125.00

    The GE temperature adapter 2016998-001 compatible replacement is a reusable, aftermarket dual-channel adapter cable (not OEM) that connects two 400-series temperature probes to GE Marquette and CARESCAPE monitors, built to OEM fit, form, and function.

    Channels
    2-Channel

    Probe Compatibility
    400 Series

    Cable Length
    1 ft (0.3 m)

    Lifecycle
    Reusable

    Works with: GE CARESCAPE B450/B650/B850, B40, Marquette Dash, Solar, Eagle, Tram and PDM modules, Cath-Lab and MAC-Lab, and the Datex-Ohmeda E-PRESTN module. See the Specifications tab for the full list. Browse more temperature cables and probes.

    IPR Medical buys, sells, repairs, and stocks parts for GE patient monitoring equipment. Call 855-477-8866 or email cs@iprmed.com.

  • Physio-Control 11110-000110 Compatible 10-Lead ECG Trunk Cable, Defib-Proof, AHA, 8.2 ft (2.5 m)

    $120.00

    The Physio-Control 11110-000110 compatible 10-lead ECG trunk cable (SKU ET-10039R-MD-A) is a reusable aftermarket replacement (not OEM) with limb and chest lead placement, AHA designation, a defib-proof feature, and an 8.2 ft (2.5 m) length.

    Lead Count
    10-Lead

    Lead Placement
    Limb + Chest Lead

    AHA/IEC Code
    AHA

    Feature
    Defib-Proof (with Resist)

    Cable Length
    8.2 ft (2.5 m)

    Replaces
    Physio-Control 11110-000110

    Works with: select Physio-Control Lifepak models, listed in full on the Specifications tab. Browse more ECG cables and leadwires.

    IPR Medical buys, sells, repairs, and stocks parts for patient monitors, ECG trunk cables, and leadwires. Call 855-477-8866 or email cs@iprmed.com.