What Is the GE TS-SP-D Compatible Pediatric Soft Tip SpO2 Sensor?

The GE Healthcare TS-SP-D compatible SpO2 sensor is a reusable, aftermarket pediatric soft-tip finger sensor for GE and Datex-Ohmeda monitors configured with TruSignal SpO2. It is a short-cable sensor with a 3.3 ft (1.0 m) lead and a Datex-style connector, which plugs into a TruSignal interconnect cable or directly into compatible Datex-Ohmeda SpO2 inputs. It is a compatible replacement, not an original GE part, and it is built to OEM fit, form, and function.

Compatible Monitor Models

This compatible sensor is confirmed for use with TruSignal-equipped GE CARESCAPE B650, V100, CARESCAPE ONE, and CARESCAPE Canvas monitors, the Dinamap B125, GE B20, B20i, and B40 monitors, Aisys and Aisys CS2 anesthesia systems, and the Corometrics 259 fetal monitor. It also fits a wide range of Datex-Ohmeda equipment, including S/5 monitors with E-series or M-OSAT modules, AS/3 and CS/3 monitors with the M-OSAT module, the E-PRESTN module, Cardiocap/5, 3775, 37xx-series, 3800, 3900, and 3900P pulse oximeters, the 4700 and 5250 monitors, and the TuffSat handheld oximeter. GE monitors have been offered with TruSignal, Masimo, or Nellcor SpO2, and each requires matching sensors, so confirm your monitor’s SpO2 configuration before ordering.

Design and Construction

The pediatric soft-tip design uses a flexible, one-piece sleeve sized for smaller fingers, applying gentle, even pressure without a hinged clip. This helps the sensor stay in place on active children and makes it well suited for continuous monitoring in pediatric units, emergency departments, and pediatric surgical cases. The short 3.3 ft (1.0 m) cable keeps weight off the finger and connects through a TruSignal interconnect cable to reach the monitor, so a worn sensor can be replaced without replacing the cable. The sensor is reusable after cleaning and disinfection according to facility protocol and ships one per bag.

When to Replace Your GE TruSignal Pediatric Soft Tip Sensor

Replace the sensor when the monitor reports “SpO2 sensor off,” “no probe,” or sensor fault messages that persist with a known-good interconnect cable, when readings are erratic or the pleth waveform is weak with good sensor placement, or when the soft sleeve is torn, stretched, or no longer holds the finger snugly, or the cable jacket is damaged near the sensor or connector. Pediatric sensors are often pulled and bent by active patients, so inspect the cable strain relief during routine checks.

Cross Reference and Interchange Part Numbers

This compatible TruSignal pediatric soft tip SpO2 sensor, IPR Medical SKU SS-018-PS10, cross-references to GE Healthcare / Datex-Ohmeda part number TS-SP-D, and interchanges with Praymed PSD0190-S and Unimed U103S-117. For GE CARESCAPE and Dinamap monitors, pair it with a TruSignal interconnect cable such as the compatible GE TS-G3, IPR Medical SKU SA-016-24TS. IPR Medical also stocks the direct-connect pediatric version, GE TS-SP3-GE (SKU SS-016-PS30), and the short adult soft tip, GE TS-SA-D (SKU SS-018-AS10).

Why Source SpO2 Sensors from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring and infusion equipment. We carry compatible TruSignal sensors and interconnect cables in adult and pediatric sizes, alongside Masimo and Nellcor options, for GE and Datex-Ohmeda monitors, so biomedical and anesthesia technology teams can supply mixed fleets from one source at lower cost than OEM. Our team can help identify each monitor’s SpO2 technology and support your GE equipment with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for GE CARESCAPE, Dinamap, and Datex-Ohmeda patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by GE Healthcare, Masimo, or any other manufacturer or supplier named on this page. GE Healthcare, Masimo, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.