What Is the GE 2016560-001 Compatible CAM 14 Patient Interface Cable?

The GE Healthcare 2016560-001 compatible EKG patient interface cable is a reusable, aftermarket cable that connects the CAM 14 acquisition module to a GE MAC resting ECG cart. In the CAM 14 setup, the 10 patient leadwires plug into the module, which sits near the patient and digitizes the 12-lead signal. This coiled cable carries that data, along with power, back to the electrocardiograph. Because the cable is the only link between the module and the cart, a worn cable can take the entire ECG system out of service. It is a compatible replacement, not an original GE part, and it is built to the same fit, form, and function as the OEM 2016560-001 cable.

Compatible Equipment Models

This compatible cable is confirmed for use with the GE Marquette CAM 14 acquisition module on the MAC 5000, MAC 5500, and MAC 5500 HD resting ECG systems, and on GE CASE stress testing systems that use the CAM 14 module. It fits the 9-pin CAM 14 port on the cart and the flat 4-pin port on the module. This cable is not for the CAM-USB or CAM HD modules, which use different interface cables, so confirm which acquisition module your carts use before ordering.

Design and Construction

The coiled cable extends from a compact resting length to 4.3 ft (1.3 m), which keeps it tidy on the cart while still letting the module reach the patient. The cart end has a 9-pin push-pull connector that locks into the cart’s CAM port and releases with a straight pull, protecting the port from strain. The module end has a flat 4-pin connector that seats firmly in the CAM 14. The gray TPU jacket resists kinks and holds up to routine cleaning. The cable is latex-free, non-sterile, weighs about 0.7 lbs, and ships one per bag.

When to Replace Your CAM 14 Patient Interface Cable

Coiled interface cables flex thousands of times over their service life, and the conductors eventually fatigue near the connectors. Replace the cable when the cart reports that the acquisition module is not detected, when the module drops offline or the ECG trace freezes when the cable is moved, when all 12 leads show noise at once (a sign the fault is upstream of the leadwires), or when you find a stretched coil that no longer retracts, a cracked jacket, or bent or recessed connector pins. Swapping in a known-good cable is the fastest way to confirm the diagnosis before replacing the module itself.

Cross Reference and Interchange Part Numbers

This compatible CAM 14 patient interface cable, IPR Medical SKU EKT-GE-CAM14-S, cross-references to GE Healthcare part numbers 2016560-001, 2104403-001, 700657-001, and E9001YT, and to Marquette 2016560-001. It also interchanges with AMC CB-2016560-001, Pacific Medical NEGE9001, Sage Services Group V02-13M, and Unimed ECAM-GE14-S. Materials managers and purchasing staff can use any of these numbers to confirm the match against existing inventory, work orders, or requisitions. Contact IPR Medical if you are replacing a part number not listed here or need a longer straight version of this cable.

Why Source ECG Interface Cables from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for diagnostic ECG, patient monitoring, and infusion equipment. Our compatible cables and accessories give cardiology and biomedical departments an affordable alternative to OEM parts while matching OEM fit and function, which matters most for widely deployed MAC 5000 and MAC 5500 fleets that are past OEM support. Our team can help confirm the right interface cable for your acquisition modules and support your ECG systems with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for GE MAC 5000 and MAC 5500 resting ECG systems and CAM 14 acquisition modules. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by GE Healthcare, or any other manufacturer or supplier named on this page. GE Healthcare, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.