What Is the M1941A Compatible SpO2 Adapter Cable?

The IPR Medical SA-024-24 is a compatible aftermarket (not OEM) SpO2 adapter cable that replaces OEM part M1941A. Its reusable cable runs 7.9 ft (2.4 m), and the SpO2 sensor technology it is meant for appears in the Specifications table.

Compatible Monitor Models

Because the list of equipment for OEM part M1941A runs long, it lives in the Compatible Monitor Models table on the Specifications tab rather than here. Alongside the original manufacturer’s own equipment, the list includes the Mindray / Datascope V12 and select Solaris models (the NT2A and NT2C). Checking the full designation on your equipment against that table is the surest way to avoid ordering the wrong adapter.

Design and Construction

Each SA-024-24 is a reusable cable 7.9 ft (2.4 m) long, supplied one per bag, and the sensor technology it is intended for is given in the Specifications table. Follow your facility’s protocol to clean it after each patient, and check the connectors and jacket for damage before reusing it.

When to Replace Your SpO2 Adapter Cable

Replace this adapter when inspection turns up a frayed, cut, or cracked jacket, a connector that is broken or no longer seats securely, bent pins, or strain relief that has torn away from the cable. Unstable or missing SpO2 readings, frequent probe-off alarms, and numbers that jump with cable movement are also common signs of an adapter at the end of its life. Substituting a known-good adapter on the same monitor quickly shows whether the old one is at fault.

Cross Reference and Interchange Part Numbers

If your records list OEM part M1941A, M1941B, or 989803105681, this compatible adapter is the cross-referenced replacement. Matching aftermarket numbers can be checked brand by brand in the Cross Reference / Interchange Part Numbers table on the Specifications tab.

Why Source SpO2 Adapter Cables from IPR Medical?

IPR Medical stocks this adapter among its SpO2 parts and, as an independent service organization certified to ISO 9001:2015, also buys, sells, and repairs parts for patient monitoring equipment and infusion pumps. Each repair is handled in-house by our technicians. Questions about fit? Call 855-477-8866, or see more SpO2 sensors and cables.

IPR Medical buys, sells, repairs, and stocks parts for SpO2 adapter cables, sensors, and the monitors they connect to. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, or any other manufacturer or supplier named on this page. Philips, FAST, IntelliVue, SureSigns, HeartStart, Heartstream, Avalon, Viridia, Codemaster, TRx, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.