What Is the Nellcor MAX-I Compatible Infant Disposable SpO2 Sensor?

The IPR Medical SSD-001XC-W09I is a compatible aftermarket (not OEM) infant non-woven adhesive SpO2 sensor that replaces the Nellcor MAX-I. This disposable sensor is designed for use with Nellcor OxiMax technology, has a 3.0 ft (0.9 m) cable, and comes in boxes of 24.

Compatible Monitor Models

Models listed for this infant sensor include select Nellcor models such as the N-560, NPB-190, and PM100N, select GE Healthcare Dinamap, Carescape, Dash, and Solar models, and select Mindray / Datascope Spectrum, Passport, iMEC, and BeneVision models. Select Welch Allyn Connex and Spot Vital Signs models, select Fukuda Denshi, Ivy Biomedical, Edan, Draeger Infinity, and Zoll models, and models from the other brands in the table are listed as well. Some Datex-Ohmeda, Mindray / Datascope, and Welch Allyn models are listed for use with the Nellcor SpO2 option; those configurations appear in separate rows. Use the Compatible Monitor Models table on the Specifications tab to confirm your monitor and SpO2 option.

Design and Construction

The SSD-001XC-W09I uses a non-woven adhesive design sized for infant patients and is intended for use with Nellcor OxiMax SpO2 technology. Its cable measures 3.0 ft (0.9 m), and sensors are packaged 24 per box. Because the sensor is disposable, discard it after use in line with facility protocol.

When to Replace Your Infant Disposable SpO2 Sensor

Use a fresh sensor whenever the adhesive stops holding securely or the fit is lost, whenever the sensor is soiled or damaged, or whenever your facility protocol calls for it. Signal problems such as SpO2 dropouts, repeated sensor-off or weak-signal alarms, or values that change when the cable moves are another cue to replace it. If a new sensor does not resolve the alarms, biomedical staff should check the monitor and its SpO2 connection.

Cross Reference and Interchange Part Numbers

This compatible sensor replaces the Nellcor MAX-I and also cross-references to Draeger MX50067, GE Healthcare / Marquette 70124026, Mindray / Datascope 0010-10-12204, and Physio-Control 11996-000115. The full set of interchange numbers is in the Cross Reference / Interchange Part Numbers table on the Specifications tab.

Why Source SpO2 Sensors from IPR Medical?

IPR Medical buys, sells, repairs, and stocks parts for patient monitoring equipment and infusion pumps, and is an ISO 9001:2015-certified independent service organization. Our in-house technicians service the monitors these sensors connect to, so our team can help you match infant SpO2 sensors to your monitors. Explore more SpO2 sensors and cables, or call 855-477-8866 for ordering, repair, or parts help.

IPR Medical buys, sells, repairs, and stocks parts for infant SpO2 sensors and the monitors that use them. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Nellcor, Philips, or any other manufacturer or supplier named on this page. Nellcor, Philips, OxiMax, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.