Datex-Ohmeda / GE Compatible Neonatal Dual-Tube NIBP Air Hose, 10 ft (3.0 m) – 877514

What Is the Datex-Ohmeda 877514 Compatible NIBP Hose?

The BPH-ND30-13-17 is a compatible aftermarket replacement, not an OEM part, for the Datex-Ohmeda / GE Healthcare 877514 neonatal NIBP air hose. This reusable dual-tube hose connects the monitor’s non-invasive blood pressure port to a 2-tube neonatal cuff. It carries inflation pressure to the cuff and returns the oscillometric pressure signal to the monitor. It is used in NICU, labor and delivery, and neonatal transport settings. The hose is built to match the OEM part’s fit, connectors, and pneumatic performance, so readings in mmHg stay consistent with the original.

Compatible Monitor Models

This hose is compatible with the Datex-Ohmeda S/5, AS/3, CS/3, Cardiocap II, Cardiocap/5, and Light monitors. It also works with the Datex-Ohmeda M-NESTPR, M-NESTR, and M-PRESTN parameter modules. On the GE side, it fits the GE Healthcare Marquette Solar, Eagle 4000, and Tram 100, 200, 250, 300, and 350 modules, along with the GE Corometrics 120 series. It is also compatible with the Criticare/CSI 500 and the Omron/Colin VP-1000 and VP-2000. Before ordering, confirm that the monitor’s NIBP port uses the dual-tube connector this hose is designed for.

Design and Construction

The hose is 10 ft (3.0 m) long and uses dual-tube construction sized for the small air volumes used in neonatal blood pressure measurement. That length gives enough reach from a bedside monitor or radiant warmer without pulling on the cuff or the NIBP port. The monitor end has a dual connector that seats directly into the Datex-Ohmeda / GE NIBP port. The patient end accepts 2-tube neonatal cuffs with male luer slip connectors. Each hose ships non-sterile in an individual bag and is designed to be wiped down and disinfected between patients according to facility protocol.

When to Replace Your NIBP Hose

NIBP hoses develop leaks over time from kinking, being crushed under bed rails and wheels, and repeated connecting and disconnecting. Replace the hose if the tubing is cracked, stiff, discolored, or permanently kinked. Also replace it if either connector is loose, chipped, or no longer seats securely. A failing hose is the likely cause when “cuff leak,” “unable to measure,” or excessive inflation-time alarms persist with a known-good cuff. The same is true when readings vary more than expected between consecutive measurements. A hose that fails a leak or static pressure check during preventive maintenance should be removed from service immediately. Keeping a spare neonatal hose on hand prevents gaps in blood pressure monitoring in the NICU.

Cross Reference and Interchange Part Numbers

The BPH-ND30-13-17 cross-references to Datex-Ohmeda / GE Healthcare OEM part numbers 877514, 9461-205, and 9461-215. It also cross-references to Orantech part numbers BPH-ND24-13-17 and BPH-ND30-13-17 and to Unimed part number HDN-22-27. Materials managers can use any of these numbers to confirm fit when replacing existing stock or consolidating purchasing across facilities. This hose is for neonatal cuffs only. Adult and pediatric cuffs use a different hose and connector configuration.

Why Source NIBP Hoses from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization specializing in patient monitoring and infusion equipment. We buy, sell, repair, and stock parts for Datex-Ohmeda and GE monitors, and we keep our compatible accessories in inventory so orders ship quickly. Our in-house technical team helps biomedical departments confirm compatibility before purchase, match cross-reference numbers, and source hard-to-find parts. Beyond accessories, we also provide monitor repair, refurbishment, and equipment sales to support your fleet.

IPR Medical buys, sells, repairs, and stocks parts for Datex-Ohmeda S/5 and GE Marquette patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Datex-Ohmeda, GE Healthcare, or any other manufacturer or supplier named on this page. Datex-Ohmeda, GE Healthcare, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.