Nellcor DS100A (Non-OxiMax) Compatible Adult Finger Clip SpO2 Sensor, OxiSmart, Hard Shell, 3.3 ft (1.0 m)

What Is the Nellcor DS100A (Non-OxiMax) Compatible SpO2 Sensor?

The IPR Medical SS-001-AF10 is a compatible aftermarket (not OEM) adult finger clip SpO2 sensor that replaces the non-OxiMax version of the Nellcor DS100A. It is a reusable hard shell finger clip sensor designed for use with Nellcor OxiSmart technology for fingertip SpO2 monitoring on adult patients, and it has a 3.3 ft (1.0 m) cable. For the OxiMax version, see our Nellcor DS-100A compatible OxiMax sensor (SS-001XC-AF10).

Compatible Monitor Models

This sensor is listed as compatible with select Nellcor models such as the N-390, N-395, and NPB-40, select GE Healthcare Dinamap, Dash, Solar, and Corometrics monitors, select Mindray and Datascope Passport, Spectrum, DPM, iMEC, and BeneVision models, and select Draeger, Edan, Invivo, Nihon Kohden, Smiths Medical BCI, Spacelabs, and Welch Allyn models, along with models from the other brands listed in the table. Some Invivo, Mennen, Nihon Kohden, PaceTech, Spacelabs, and Welch Allyn models are listed for use with the Nellcor SpO2 option; those configurations appear in separate rows of the table. See the Compatible Monitor Models table on the Specifications tab for the complete list, and confirm your monitor and SpO2 option before ordering.

Design and Construction

The SS-001-AF10 has a hard shell finger clip housing sized for adults and is intended for use with Nellcor OxiSmart SpO2 technology rather than OxiMax. Its cable is 3.3 ft (1.0 m) long, and each sensor ships one per bag. Because it is reusable, the sensor can be cleaned between patients according to facility protocol and returned to service for as long as it passes inspection.

When to Replace Your SpO2 Sensor

Inspect the sensor before each use. Replace it if the finger clip housing is cracked, the clip no longer closes firmly on the finger, the cable jacket is cut, cracked, or kinked, or the connector shows bent or damaged pins. Readings that drop out, persistent sensor-off or poor-signal alarms, and values that change when the cable is flexed usually point to a worn sensor. Trying a known-good sensor on the same monitor helps biomedical staff confirm whether the sensor or the monitor needs attention.

Cross Reference and Interchange Part Numbers

This compatible sensor replaces the non-OxiMax Nellcor DS100A, also listed as DS-100-N0. It also cross-references to Mindray / Datascope 512D-30-90200, 512F-30-28265, 512F-30-28263, and 115-012807-00, Edan 02.01.210120 and 02.01.210119, Draeger 2606484 and MS13235, Spacelabs 015-0660-00, Welch Allyn 9293-064-55, GE Healthcare / Marquette 420970-001, Comen CM-M02-003, and Cardell 3-009-0020. The full list of interchange numbers is in the Cross Reference / Interchange Part Numbers table on the Specifications tab.

Why Source SpO2 Sensors from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitors and infusion pumps. Our technicians repair and test monitoring equipment in-house, so our team can help you match the right SpO2 sensor to each monitor in your fleet, whether it uses OxiSmart or OxiMax technology. Shop more SpO2 sensors and cables, or call 855-477-8866 for help with ordering, repairs, or parts.

IPR Medical buys, sells, repairs, and stocks parts for SpO2 sensors and the patient monitors that use them. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Nellcor, Philips, or any other manufacturer or supplier named on this page. Nellcor, Philips, OxiSmart, OxiMax, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.