Nellcor FLEXMAX Compatible Adult Soft Tip SpO2 Sensor, OxiMax, 3.3 ft (1.0 m)

What Is the Nellcor FLEXMAX Compatible Soft Tip SpO2 Sensor?

The IPR Medical SS-001XC-AS10 is a compatible aftermarket (not OEM) adult soft tip SpO2 sensor that replaces the Nellcor FLEXMAX. It is a reusable sensor for adult patients, intended for use with Nellcor OxiMax technology, and it has a 3.3 ft (1.0 m) cable.

Compatible Monitor Models

Compatibility listings for this soft tip sensor include select Nellcor models such as the N-395, N-600x, and NPB-3900, select GE Healthcare Dinamap, Dash, Solar, and Carescape monitors, select Mindray and Datascope Passport, Spectrum, DPM, iMEC, and BeneVision models, and select Welch Allyn, Nihon Kohden, Smiths Medical BCI, Criticare, Draeger, Edan, and Physio-Control Lifepak models, together with models from the other brands in the table. Some Mindray / Datascope, PaceTech, and Welch Allyn models are listed for use with the Nellcor SpO2 option; those configurations have their own rows. The Compatible Monitor Models table on the Specifications tab has the complete list, so confirm your monitor and SpO2 option there before ordering.

Design and Construction

The SS-001XC-AS10 uses a soft tip sensor design sized for adults and is intended for use with Nellcor OxiMax SpO2 technology. The cable is 3.3 ft (1.0 m) long, and the sensor is packaged one per bag. Being reusable, it can be cleaned between patients in line with facility protocol and kept in service as long as it passes inspection.

When to Replace Your Soft Tip SpO2 Sensor

Replace the sensor if the soft tip is torn, cracked, or no longer fits snugly, if the cable jacket is cracked, cut, or kinked, or if the connector has bent or damaged pins. Dropouts in SpO2 readings, frequent sensor-off or low-signal alarms, and values that change when the cable is moved are other common signs of wear. A quick swap with a known-good sensor on the same monitor helps biomedical staff confirm the cause.

Cross Reference and Interchange Part Numbers

This compatible sensor replaces the Nellcor FLEXMAX and also cross-references to Draeger MS34677 and Edan 02.01.210122-11. The remaining interchange numbers are listed in the Cross Reference / Interchange Part Numbers table on the Specifications tab.

Why Source SpO2 Sensors from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring equipment and infusion pumps. Because our technicians repair and test monitors in-house, our team can help you pick the SpO2 sensor that fits your monitors and keep those monitors running. Explore more SpO2 sensors and cables, or call 855-477-8866 for help with ordering, repairs, or parts.

IPR Medical buys, sells, repairs, and stocks parts for SpO2 sensors and the patient monitors that use them. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Nellcor, Philips, or any other manufacturer or supplier named on this page. Nellcor, Philips, OxiMax, FLEXMAX, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.