Nihon Kohden TL-201T Compatible Adult Finger Clip SpO2 Sensor, Hard Shell, 5.2 ft (1.6 m)

What Is the Nihon Kohden TL-201T Compatible Adult Finger Clip SpO2 Sensor?

The IPR Medical SS-043-AF16 is a compatible aftermarket (not OEM) adult finger clip SpO2 sensor that replaces the Nihon Kohden TL-201T. It combines a hard shell clip with a 5.2 ft (1.6 m) cable and is intended for use with Nihon Kohden SpO2 technology. Because the sensor is reusable, one unit can remain in service from patient to patient when it is cleaned and inspected between uses.

Compatible Monitor Models

This sensor is listed for select Nihon Kohden models, among them the BSM-2301, BSM-4100 Life Scope P, BSM-6501K, BSM-9510 Life Scope M, Life Scope TR, PVM-2703, SVM-7260, and ZM-530-PA, along with the Oxipal P225F. Select Hamilton models, the G5 and S1, are listed as well. Use the Compatible Monitor Models table on the Specifications tab to confirm your exact model before placing an order.

Design and Construction

The SS-043-AF16 pairs a hard shell finger clip sized for adult patients with a 5.2 ft (1.6 m) cable, and it is designed for use with Nihon Kohden SpO2 technology. Each sensor is packed one per bag. As a reusable accessory, it should be cleaned between patients according to facility protocol, with the clip and cable checked for damage before each use.

When to Replace Your Adult Finger Clip SpO2 Sensor

Take the sensor out of service if the hard shell is cracked or the clip no longer stays closed, if the cable jacket is split, crushed, or kinked, or if you find bent pins at the connector. Intermittent SpO2 values, a pulse rate that does not match the patient, and sensor-off alarms that come and go as the cable moves are other common signs of wear. Swapping in a known-good sensor on the same monitor is a quick way to tell a sensor fault from a monitor problem.

Cross Reference and Interchange Part Numbers

Besides the Nihon Kohden TL-201T, this compatible sensor cross-references to Nihon Kohden P224A, TL-101T, and P225F. The remaining interchange numbers are listed in the Cross Reference / Interchange Part Numbers table on the Specifications tab.

Why Source SpO2 Sensors from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring equipment and infusion pumps. Our technicians repair and test monitors in-house, so we can help you match a reusable SpO2 sensor to the Nihon Kohden models your facility relies on. See our full range of SpO2 sensors and cables, or call 855-477-8866 for help with orders, repairs, or parts.

IPR Medical buys, sells, repairs, and stocks parts for compatible SpO2 sensors and Nihon Kohden patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Nihon Kohden, or any other manufacturer or supplier named on this page. Nihon Kohden, Life Scope, Oxipal, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.