-
B Braun Outlook 100es
The Outlook ES is intended for use with B. Braun Medical Inc. Horizon Pump IV Sets to regulate the flow of primary and secondary fluids when positive pressure is required. The infusion system is capable of delivering fluid from a negative head height (when the IV fluid container is lower than the pump), and provides clinically accepted volumetric accuracy for all standard IV fluids, including blood, lipids, and Total Parenteral Nutrition (TPN).
Positive pressure is frequently a necessity, but clinical experience shows that high pressure limits may increase the severity of an infiltration without causing an alarm. Because there is a need to control pump pressure settings, the Outlook ES has user-selectable Occlusion Limit settings which start at 75 mmHg and extend to 500 mmHg. For epidural infusions which require higher pressures, the pump has an extended occlusion limit setting of 750 mmHg.
The pump is equipped with distinct audible and visual alarm signals to indicate Keep Vein Open (KVO), low battery, and other alarm conditions.
Features
- Promotes patient safety by helping to avoid accidental under- or overdosing using audible and visual alerts for soft/hard dose limits.
- Provides the ability to customize up to 300 drugs and 15 care areas to match your drug formulary, using the expanded DoseGuard drug library.
- Provides reliable operation and accuracy using a proven delivery mechanism.
- Provides comprehensive “at-a-glance” viewing of infusion status on a large color screen.
- Promotes quick and easy drug selection using an active alphabetic drug library matrix.
- Promotes safer and more confident programming with color-coded key pad and audible key clicks.
-
B Braun Outlook 100
The Outlook™ 100 is intended for use with B. Braun Medical Inc. Horizon® Pump IV Sets to regulate the flow of primary and secondary fluids when positive pressure is required. The infusion system is capable of delivering fluid from a negative head height (when the IV fluid container is lower than the pump), and provides clinically accepted volumetric accuracy for all standard IV fluids, including blood, lipids, and Total Parenteral Nutrition (TPN).
Positive pressure is frequently a necessity, but clinical experience shows that high pressure limits may increase the severity of an infiltration without causing an alarm. Because there is a need to control pump pressure settings, the Outlook ES has user-selectable Occlusion Limit settings which start at 75 mmHg and extend to 750 mmHg.
The pump is equipped with distinct audible and visual alarm signals to indicate Keep Vein Open (KVO), low battery, and other alarm conditions.
Features
- Promotes patient safety by helping to avoid accidental under- or overdosing using audible
- and visual alerts
- Provides flexibility for each care area—ability to customize dose limits to your hospital drug formulary
- Promotes clinician choice with dose limit override when limits are exceeded during manual programming and titration
- Visually indicates dose selection with DoseGuard™ software
- Easy to learn:
– Manual operation RATE, VOLUME, RUN
– Automatic Dose Rate Calculator
– Large, highly visible keys
- Reduce nuisance air-in-line alarms with air-trapping cassette
- Stackable modular design reduces bedside cord clutter and errors due to channel confusion
- Comprehensive line of needle-free administration sets including UV light resistant tubing that protects drug efficacy
-
Hospira Gemstar Blue
The GemStar Pump is a small and lightweight, single-channel infusion device designed for use in the home, in the hospital, or anywhere electronic infusion is required. The GemStar Pump can be powered by AC mains adaptor, rechargeable battery pack, docking station, or two disposable AA alkaline or lithium batteries. When powered by batteries, the GemStar Pump is ideal for ambulatory patients.
Hospira Gemstar Blue Offers 7 Therapy Features:
- Pain Management
- TPN
- Continuous
- Variable Time
- Weight Dosed
- Intermittent
- mL/hr Only
-
Eitan Medical/ Q Core Sapphire Epidural
The Eitan Medical Sapphire Epidural pump is a dedicated epidural infusion pump built on the proven Sapphire platform. Purpose-built for epidural applications, it features yellow-colored tubing, a yellow faceplate, and on-screen yellow labeling — the internationally recognized color coding for epidural lines — to reduce the risk of misconnection at the point of care.
The Sapphire Epidural delivers three specialized modes: PCEA (patient-controlled epidural analgesia) with optional basal rate and loading dose, Intermittent Epidural with scheduled doses and optional basal rate, and PIEB (programmed intermittent epidural bolus), which combines intermittent scheduled doses with PCEA while giving priority to the intermittent dose to ensure delivery and prevent dose stacking. Flow rates are limited to safe epidural ranges, with a continuous rate of 0–25 mL/h and bolus rates at selectable levels. At 418 g without battery and running approximately 24 hours on a single charge, it is compact enough for labor and delivery, OR, and ambulatory pain management settings.
IPR Medical is one of the few authorized Level 2 Eitan Medical service centers in the United States. We perform manufacturer-authorized repairs, preventive maintenance, and warranty service on all Sapphire pumps — keeping your fleet compliant and calibrated without shipping units back to the manufacturer.
-
Eitan Medical/ Q Core Sapphire Multi-Therapy
The Eitan Medical Sapphire Multi-Therapy is a complete infusion system for varied clinical uses in hospital, ambulatory, and EMS settings. Combining high-end volumetric infusion pump functionality with compact size and low weight, it is designed for PCA, TPN, Continuous, Piggyback, Intermittent, and Epidural treatments — all on a single platform with one standard interface.
Built on Eitan Medical’s patented Flow Control Technology with an intuitive touchscreen and robust hardware, the Sapphire delivers medication infusion confidence across the full continuum of care — from hospitals and infusion centers to homecare and pre-hospital medical transport. It is approved for both air and ground medical transportation, weighs just 418 g without battery, and runs approximately 24 hours on a single charge.
IPR Medical is one of the few authorized Level 2 Eitan Medical service centers in the United States. We perform manufacturer-authorized repairs, preventive maintenance, and warranty service on all Sapphire pumps — keeping your fleet compliant and calibrated without sending units back to the manufacturer.
-
Alaris 8100 Pump Module
Original price was: $895.00.$495.00Current price is: $495.00.The BD Alaris™ 8100 Pump Module is the large-volume infusion channel of the widely deployed Alaris System — a modular, point-of-care infusion platform that has been a cornerstone of IV medication safety programs in hospitals across the United States for over two decades. Designed to attach to the Alaris PC Unit (PCU, Model 8015), the 8100 operates as one channel in a system that can accommodate up to four pump modules on a single PCU, enabling clinicians to manage multiple independent infusions from a unified interface. Each channel delivers fluids, medications, blood, and blood products to adult, pediatric, or neonatal patients across intravenous, intra-arterial, subcutaneous, epidural, enteral, and irrigation routes.
The 8100 delivers from 0.1 to 999 ml/h with ±5% accuracy (±5.5% at rates below 1 ml/h), supports secondary (piggyback) infusion mode, drug calculation, multi-dose programming, dynamic downstream pressure display, and configurable occlusion pressure thresholds. Its color-coded LED status indicators — red for alarm, yellow for pause, green for infusing — let nurses assess the state of every channel at a glance without approaching the bedside. At 2.5 lbs and measuring 3.3″ × 8.9″ × 5.5″, the module attaches to either side of the PCU in under a minute and can be hot-swapped while other channels continue infusing.
IPR Medical buys, sells, repairs, and stocks parts for the BD Alaris 8100 Pump Module. Whether you need to expand an existing Alaris fleet, replace failed modules, or establish a service contract for preventive maintenance, our team can help. Contact us at 855-477-8866 or cs@iprmed.com.
-
Hospira Plum A+
Original price was: $795.00.$495.00Current price is: $495.00.The Hospira Plum A+ is a dual-line, single-channel, cassette-based volumetric infusion system designed for hospital-wide, alternate-site, and home healthcare standardization. Built for parenteral, enteral, and epidural infusion across neonatal, pediatric, and adult patients, the Plum A+ supports primary, secondary (piggyback), and concurrent delivery through a single output line — allowing two medications to run simultaneously without requiring a second IV site. Flow rates range from 0.1 to 999 ml/h with ±5% accuracy (1–999 ml/h) and 15 dose-calculation delivery units, making it suitable for everything from low-rate critical care drips to high-volume fluid replacement.
The Plum A+ features Hospira’s PlumSet cassette technology with integrated free-flow protection, a closed air management system that captures up to 2 ml of air and removes it via automated back-priming without disconnecting the patient line, variable distal occlusion pressure (1–15 psig, user-selectable), and proximal occlusion detection. At 9.5 lbs with an internal rechargeable sealed lead-acid battery providing approximately 6 hours at 125 ml/h, the Plum A+ is fully compatible with the LifeCare Plum Series administration sets and LifeShield/CLAVE needleless protection systems.
IPR Medical buys, sells, repairs, and stocks parts for the Hospira Plum A+. Whether you need a recertified pump, a replacement battery, cassette door, or pole clamp, or a full repair and recertification, contact us at 855-477-8866 or cs@iprmed.com.
-
Hospira Plum A+ with Mednet
Original price was: $995.00.$495.00Current price is: $495.00.The Hospira Plum A+ with MedNet is a dual-line, single-channel, cassette-based volumetric infusion system equipped with Hospira MedNet safety software — transforming the proven Plum A+ hardware into a networked, smart-pump medication management platform. MedNet adds a Custom Drug Library with facility-defined hard and soft dosing limits organized by clinical care area, auto-programming capability that receives physician orders directly at the pump, networked drug library updates that push library changes to the entire fleet from a central server. The result is a complete closed-loop medication safety system on a platform with over 325,000 installations worldwide.
The underlying hardware delivers flow rates from 0.1 to 999 ml/h with ±5% accuracy (1–999 ml/h) across 15 dose-calculation delivery units. Hospira’s PlumSet cassette technology provides integrated free-flow protection, a closed air management system that captures up to 2 ml of air and removes it via automated back-priming without disconnecting the patient line, and variable distal occlusion pressure (1–15 psig). Primary, secondary (piggyback), and concurrent delivery through a single output line allow two medications to run simultaneously. The Plum A+ with MedNet supports parenteral, enteral, and epidural infusion across neonatal, pediatric, and adult patient populations in medical/surgical, critical care, OR, emergency, and alternate-site environments.
IPR Medical buys, sells, repairs, and stocks parts for the Hospira Plum A+ with MedNet. Whether you need a recertified pump, a replacement battery, MedNet module support, or a full repair and recertification, contact us at 855-477-8866 or cs@iprmed.com.
-
BD Alaris 8015 PC Unit (4.7″ Display)
Original price was: $550.00.$495.00Current price is: $495.00.The BD Alaris 8015 PC Unit with the 4.7″ display is the original form factor of the Alaris PCU — the same modular command center that became one of the most deployed infusion platforms in North American acute care, just with a smaller screen. Everything that defines the Alaris system is here: up to four attached infusion and monitoring modules (pump, syringe, PCA, SpO2, EtCO2) under a single unified interface, Guardrails Suite MX running up to 30 care area profiles with facility-defined soft and hard dose limits, and wireless connectivity via Alaris Systems Manager for fleet-wide drug library updates and CQI reporting. The 4.7″ display is smaller than the 5.7″ variant but runs the same software, accepts the same modules, and fits the same pole clamp — meaning any facility already running 4.7″ units can add to the fleet without retraining staff or changing workflows.
If your facility needs the larger screen for high-acuity environments where bedside visibility matters, the 5.7″ version is also available from IPR Medical. Also available: BD Alaris 8015 with 5.7″ display But if you’re stocking up on a proven platform at a lower price point, or simply replacing units in an existing 4.7″ fleet, this is a cost-effective way to do it without compromising on capability.
IPR Medical buys, sells, repairs, and stocks parts for the BD Alaris 8015. Call us at 855-477-8866 or email cs@iprmed.com.
-
ICU Medical / Hospira Plum XL Infusion Pump
Original price was: $795.00.$495.00Current price is: $495.00.The ICU Medical / Hospira Plum XL Micro/Macro is a dual-line volumetric infusion pump originally introduced by Abbott Laboratories in 1993 and later marketed by Hospira and ICU Medical. With a single integrated cassette pathway that supports primary, secondary, and piggyback delivery from one device, the Plum XL was widely deployed across med/surg, critical care, alternate-site, and home-care environments before its OEM retirement on June 30, 2015. IPR Medical supports facilities that continue to operate Plum XL fleets with refurbished pumps, recertified components, and field service.
Pump Type
Dual-line volumetric, cassette-basedFlow Rate Range
0.1 to 999 mL/hrDelivery Modes
Primary, Secondary, PiggybackDisplay / Interface
Backlit LCD with rotary control dialBattery
Sealed lead-acid 8 V, ~8 hr at 125 mL/hrNotable Features
Backpriming, anti-free-flow cassette, lockout switch, optional DataPortIPR Medical buys, sells, repairs, and stocks parts for the Hospira Plum XL Infusion Pump. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
Hospira Plum A+ — dual-line successor to the Plum XL |
Hospira Plum A+ with MedNet — Plum A+ with MedNet drug library software |
Hospira Plum A+ 3 — three-channel Plum platform |
ICU Medical Plum 360 — current-generation Plum platform -
Baxter Flo-Gard 6201
Original price was: $895.00.$550.00Current price is: $550.00.The Baxter Flo-Gard 6201 is a single-channel linear peristaltic volumetric infusion pump designed to deliver a wide variety of fluids — including blood and fat emulsions — across a broad range of infusion rates. A significant upgrade over the 6200, the 6201 adds incremental 0.1 mL/hr flow rate precision, a Programmed Delivery Profile (PDP) with up to 10 sequential infusion steps for ramped or manual programming, selectable air-in-line detection sensitivity, selectable downstream occlusion sensitivity, a Flow Check display, volume-time programming, a five-hour infusion data memory, and suitability for epidural administration.
It runs on 110/120V AC or an internal 12-volt sealed lead-acid battery with approximately 6 hours of runtime. Automatic piggybacking, a locking control panel, and an automatic safety clamp that occludes tubing on door open round out a pump that hospitals continue to rely on long after its discontinuation.
The Flo-Gard 6201 is an older, discontinued pump — but its dependability has kept it in active service across healthcare settings for decades. IPR Medical maintains a large inventory of Flo-Gard 6201 parts to keep your fleet running strong, from batteries and fuses to pump mechanisms and power cords.
-
Baxter Sigma Spectrum Version 6
Original price was: $995.00.$795.00Current price is: $795.00.The Baxter SIGMA Spectrum Version 6 is one of the most recognizable large-volume infusion pumps in North American acute care — and for good reason. The Spectrum platform built its reputation on one thing: keeping clinicians from making programming errors under pressure. Dose Error Reduction Software (DERS) defaults on at startup, your Master Drug Library enforces soft and hard limits by care area, and the guided bedside workflow means staff spend less time second-guessing and more time focused on the patient.
Flow rates run 0.5 to 999 ml/h with ±5% accuracy, the pump supports a full range of clinical modes including titration on the fly and multi-step ramping, and optional 802.11b/g wireless lets your biomed team push drug library updates and pull CQI data across the fleet remotely. If you’re running Spectrum pumps already, the V6 slots right into your existing infrastructure — same IV sets, same staff training, same wireless backbone. If you’re building a fleet from scratch, it’s a proven platform at a price point that’s hard to argue with.
Also available:
- Baxter Sigma Spectrum Version 8 — enhanced drug library and wireless updates, same proven Spectrum platform
- Baxter Spectrum IQ — full EMR integration with Auto-Programming, Auto-Documentation, and built-in asset tracking
IPR Medical stocks compatible Baxter IV administration sets, so you can source pumps and sets from one place. If you’re building or refreshing a Spectrum fleet on a budget, the V6 delivers the proven platform at a lower cost than later versions, with full repair and parts support from IPR Medical. Call us at 855-477-8866 or reach out at cs@iprmed.com.
IPR Medical
0
Cart:
$0.00
No products in the cart.
Shop all products
Shop
