What Is the GE TS-F4-GE Compatible Adult Finger Clip SpO2 Sensor?

The GE Healthcare TS-F4-GE compatible SpO2 sensor is a reusable, aftermarket adult hard-shell finger clip pulse oximetry sensor for GE and Datex-Ohmeda monitors configured with TruSignal SpO2. It is a direct-connect sensor with a 9.8 ft (3.0 m) integrated cable, so no separate interconnect cable is needed. It is a compatible replacement, not an original GE part, and it is built to OEM fit, form, and function.

Compatible Monitor Models

This compatible sensor is confirmed for use with TruSignal-equipped GE CARESCAPE B125, B450, B650, B850, and V100 monitors, Dinamap B105M, B105P, B125M, B125P, and B155M monitors, and GE ProCare B20 and B40 monitors. It also fits GE Aisys and Aisys CS2 anesthesia systems and Datex-Ohmeda S/5 monitors, including the F-FM-00 and F-FML-00 frames and S/5 systems with E-series modules. GE monitors have been offered with TruSignal, Masimo, or Nellcor SpO2, and each requires matching sensors, so confirm your monitor’s SpO2 configuration before ordering.

Design and Construction

The hard-shell finger clip holds the emitter and detector in consistent alignment on adult fingers, making it well suited for spot checks, OR and PACU use, and short-term continuous monitoring. The 9.8 ft (3.0 m) cable gives enough reach from the bedside or stretcher to a wall-, pole-, or anesthesia-mounted monitor without an extension. The sensor is reusable after cleaning and disinfection according to facility protocol and ships one per bag.

When to Replace Your GE TruSignal Finger Clip Sensor

Replace the sensor when the monitor reports “SpO2 sensor off,” “no probe,” or sensor fault messages, when readings are erratic or the pleth waveform is weak on a well-perfused patient, or when the clip spring has weakened, the housing is cracked, the pad is torn, or the cable jacket is damaged near the clip or connector. Reusable clip sensors see heavy daily handling, so many facilities keep spares on each unit to avoid downtime.

Cross Reference and Interchange Part Numbers

This compatible TruSignal adult finger clip SpO2 sensor, IPR Medical SKU SS-016-AF30, cross-references to GE Healthcare TS-F4-GE and Datex-Ohmeda OXY-F4-GE and TS-F2-GE. It also interchanges with Praymed PSA0128-L, Sage Services Group P02-30M, and Unimed U410-121. The OEM sensors come in different cable lengths, about 13 ft for TS-F4-GE and 7 ft for TS-F2-GE, so confirm the 9.8 ft (3.0 m) length suits your setup. For a TruSignal ear clip, see the compatible GE TS-E4-GE, IPR Medical SKU SS-016-AE30.

Why Source SpO2 Sensors from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring and infusion equipment. We carry compatible TruSignal, Masimo, and Nellcor SpO2 sensors and cables for GE and Datex-Ohmeda monitors, so biomedical and anesthesia technology teams can supply mixed fleets from one source at lower cost than OEM. Our team can help identify each monitor’s SpO2 technology and support your GE equipment with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for GE CARESCAPE, Dinamap, ProCare, and Datex-Ohmeda patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by GE Healthcare, Masimo, or any other manufacturer or supplier named on this page. GE Healthcare, Masimo, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.