What Is the GE 2017006-001 Compatible 10-Lead ECG Trunk Cable?

The GE Healthcare Marquette 2017006-001 compatible ECG trunk cable is a reusable, aftermarket 10-lead patient cable that connects GE Multi-Link limb and chest leadwire sets to GE Marquette and CARESCAPE monitors for 10-electrode (12-lead) ECG monitoring. It supports impedance respiration monitoring and uses AHA color coding. It is a compatible replacement, not an original GE part, and it is built to OEM fit, form, and function.

Compatible Monitor Models

This compatible trunk cable is confirmed for use with Marquette Dash, Solar, and Eagle monitors, the GE CARESCAPE B650, and Cath-Lab and MAC-Lab hemodynamic recording systems. It also fits the Datex-Ohmeda E-PRESTN and M-PRESTN parameter modules. Pair it with GE Multi-Link-style leadwire sets to complete the 10-lead configuration.

Design and Construction

The 8.2 ft (2.5 m) trunk runs from the monitor to a Multi-Link yoke that accepts separate limb and chest leadwire sets, so a damaged leadwire set can be replaced without replacing the trunk. The cable supports monitoring use with impedance respiration and follows the AHA color standard. It is reusable after cleaning according to facility protocol and ships one per bag.

When to Replace Your GE 10-Lead ECG Trunk Cable

Replace the trunk cable when the monitor shows “leads off” or noisy, intermittent ECG on multiple leads with known-good leadwires and electrodes, when respiration readings drop out, when artifact appears as the cable is flexed, or when you find a cracked jacket, a loose yoke, or bent or corroded pins at either connector. Swapping in a known-good trunk and leadwire set quickly identifies which component is at fault.

Cross Reference and Interchange Part Numbers

This compatible 10-lead Multi-Link ECG trunk cable, IPR Medical SKU ET-10004-MQ-A, cross-references to GE Healthcare / Marquette part numbers 2017006-001, 2017006-002, 2106308-001, and 2106308-002. It also interchanges with AMC CB-5110006, Sage Services Group T02-12-30M, and Unimed MQ-21086. The OEM cables come in different lengths, about 12 ft for 2017006-001 and 2106308-001 and 4 ft for the -002 versions, so confirm the 8.2 ft (2.5 m) length suits your setup. For a one-piece 10-lead cable with attached leadwires, see the compatible GE one-piece 10-lead ECG cable, IPR Medical SKU EC-10004G-A.

Why Source ECG Cables from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for patient monitoring and infusion equipment. We carry compatible GE Multi-Link trunk cables, leadwire sets, and one-piece ECG cables alongside SpO2, NIBP, IBP, and temperature accessories, so biomedical teams can supply their GE fleet from one source at lower cost than OEM. Our team can help identify the right cable configuration for each monitor and support your GE equipment with in-house repair services.

IPR Medical buys, sells, repairs, and stocks parts for GE Dash, Solar, Eagle, and CARESCAPE patient monitors. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by GE Healthcare, Marquette, or any other manufacturer or supplier named on this page. GE Healthcare, Marquette, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.