What Is the Compatible Masimo 2507 M-LNCS DB-I SpO2 Sensor?

The Masimo 2507 (M-LNCS DB-I) compatible SpO2 sensor (IPR SKU SS-007RB-AS10) is a reusable adult soft tip finger sensor for Masimo SET-equipped devices that use the M-LNCS sensor interface. It is a compatible aftermarket replacement, not an OEM Masimo product, built to match the fit, form, and function of the original. The 3.3 ft (1.0 m) cable ends in an M-LNCS connector, which attaches to the monitor through an M-LNCS-compatible patient cable such as a Masimo rainbow RC-series or M-LNC cable. The soft tip is a comfortable alternative to the hard shell clip for patients who need monitoring over longer periods. Note that M-LNCS and standard LNCS connectors are not interchangeable without an adapter.

Compatible Monitor Models

This compatible sensor works with Biolight BLT A6, BLT A8, M8500, Q3, Q6, and Q7 monitors and the Masimo Radius-7. On devices with a 20-pin Masimo Red or rainbow port, the sensor connects through an M-LNCS patient cable. Confirm your device’s SpO2 interface and patient cable before ordering.

Design and Construction

The soft tip design wraps the fingertip without the spring pressure of a hard shell clip. That improves comfort during extended monitoring, reduces pressure points on fragile skin, and helps the sensor stay in place on restless or agitated patients. It is sized for adult patients weighing more than 66 lbs (30 kg). The 3.3 ft (1.0 m) cable terminates in an M-LNCS connector. The sensor is reusable and supplied one per bag.

When to Replace Your 2507 M-LNCS DB-I SpO2 Sensor

Reusable soft tip sensors wear with repeated cleaning and handling. Replace the sensor when the soft tip material is torn, stretched, or hardened and no longer holds the finger securely, the emitter or detector windows are scratched or discolored, the M-LNCS connector is cracked or damaged, or the cable jacket shows cuts or kinks. Persistent “sensor off” alarms, low signal quality, or readings that drop out when the cable is moved also point to a failing sensor. If a sensor fails to read on a monitor that passes self-test, try a known-good sensor and patient cable to isolate the fault quickly.

Cross Reference and Interchange Part Numbers

This compatible sensor cross-references to Masimo 2507 (M-LNCS DB-I), and to the OEM-labeled equivalents sold under other monitor brands, including Draeger MP03207, GE Healthcare 2068423-063, and Physio-Control 11171-000065. The aftermarket interchange number Praymed PSC0426-S also applies.

Why Source Masimo-Compatible SpO2 Sensors from IPR Medical?

IPR Medical is an ISO 9001:2015-certified independent service organization that buys, sells, repairs, and stocks parts for infusion pumps and patient monitoring equipment. Compatible reusable SpO2 sensors give EMS agencies, emergency departments, and materials managers a cost-effective way to keep Masimo-equipped monitors and defibrillators in service without paying OEM pricing. We also stock compatible M-LNCS patient cables, so you can source the sensor and cable together. Our team can confirm fit against your device before you order, and we also offer in-house repair services, replacement parts, and refurbished equipment.

IPR Medical buys, sells, repairs, and stocks parts for the Masimo 2507 M-LNCS DB-I SpO2 Sensor. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Masimo, or any other manufacturer or supplier named on this page. Masimo, LNCS, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.