IPR Medical

Philips 989803148221 Compatible SpO2 Adapter Cable, for Use with Masimo LNCS Sensors, 9.8 ft (3.0 m)

$60.00

The 989803148221 compatible SpO2 adapter cable (SKU SA-024M-30LS) is a reusable aftermarket replacement (not OEM) with a 9.8 ft (3.0 m) cable, for use with Masimo LNCS sensors.

Cable Type SpO2 Adapter Cable
SpO2 Technology Masimo LNCS
Cable Length 9.8 ft (3.0 m)
Lifecycle Reusable
Packaging 1 per bag
Replaces Philips 989803148221

Works with: the monitor models listed in the Specifications tab. Browse more SpO2 sensors and cables.

IPR Medical buys, sells, repairs, and stocks parts for patient monitors and SpO2 accessories. Call 855-477-8866 or email cs@iprmed.com.

SKU: SA-024M-30LS Categories: , Tags: ,
Send In Philips 989803148221 Compatible SpO2 Adapter Cable, for Use with Masimo LNCS Sensors, 9.8 ft (3.0 m) for Repair

Specifications

Product Type Compatible Aftermarket Replacement (Not OEM)
IPR Part Number (SKU) SA-024M-30LS
Replaces OEM Part Philips 989803148221
Category Cables & Sensors > SpO2
Cable Type SpO2 Adapter Cable
SpO2 Technology Masimo LNCS
Used With Masimo LNCS sensors
Cable Length 9.8 ft (3.0 m)
Lifecycle Reusable
Packaging 1 per bag

Compatible Monitor Models

Manufacturer Compatible Models
Philips Heartstream XL, IntelliVue MP30, IntelliVue MP40, IntelliVue MP50, IntelliVue MP70, IntelliVue MX40, IntelliVue MX400, IntelliVue MX450, IntelliVue MX500, IntelliVue MX550, IntelliVue MX600, IntelliVue MX700, IntelliVue MX700 Masimo Rainbow, IntelliVue MX800, M1020B, M2601A, M3000A, M3001A, M3001A A03, M3001A A03C06, M3001A A03C12, M3001A A03C18, M3002A, M3002A MMS X2, M3500B, M4735A, M8102A, M8102A MP2, M8105A MP5, M8105AS, SureSigns VM6, SureSigns VM8, SureSigns VS2, SureSigns VS3, SureSigns VS4, VM4

Cross Reference / Interchange Part Numbers

Manufacturer / Supplier Part Number
Philips 989803148221, LNC MP12
Masimo 2270, 2281, LNC LP10, LNC MP10
Sage E10-708MP
Unimed U708M-43, U710M-43

IPR Medical buys, sells, repairs, and stocks parts for SpO2 adapter cables and the patient monitors they serve. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, Masimo, or any other manufacturer or supplier named on this page. Philips, Masimo, LNCS, Rainbow, IntelliVue, SureSigns, Heartstream, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

What Is the 989803148221 Compatible SpO2 Adapter Cable?

The IPR Medical SA-024M-30LS is a compatible aftermarket (not OEM) SpO2 adapter cable that replaces OEM part 989803148221. It is a reusable 9.8 ft (3.0 m) adapter for use with Masimo LNCS sensors, carrying the sensor connection to the compatible equipment shown on the Specifications tab.


Compatible Monitor Models

Rather than repeat a long list here, every model on record for OEM part 989803148221 is kept in the Compatible Monitor Models table on the Specifications tab. Several entries add a configuration or option code after the base model number, so compare the complete designation on your equipment label with the table before placing an order.


Design and Construction

A reusable accessory, the SA-024M-30LS is intended for use with Masimo LNCS SpO2 technology and has a cable length of 9.8 ft (3.0 m). Each adapter is packaged individually, one per bag. Wipe it down between patients following your facility’s cleaning protocol, and give the jacket and both connectors a visual check whenever it goes back into service.


When to Replace Your SpO2 Adapter Cable

Take the adapter out of rotation if the jacket is split, crushed, or kinked, if the strain relief at either end is separating, or if a connector housing is cracked or shows bent pins. Recurring sensor-off or no-signal alarms, gaps in the SpO2 reading, and values that change as the cable is moved also suggest the adapter is wearing out. If the problem goes away when a spare adapter is connected to the same sensor and monitor, the original adapter is the cause.


Cross Reference and Interchange Part Numbers

OEM part 989803148221 is the number the SA-024M-30LS replaces. For every other interchange number on record, including those filed under the sensor-technology brand, open the Specifications tab, where the Cross Reference / Interchange Part Numbers table groups them by brand.


Why Source SpO2 Adapter Cables from IPR Medical?

IPR Medical supplies SpO2 adapters like the SA-024M-30LS as part of its work buying, selling, repairing, and stocking parts for patient monitoring equipment and infusion pumps. IPR Medical is also ISO 9001:2015-certified as an independent service organization, with its technicians completing repairs in-house. Call 855-477-8866, or browse our SpO2 sensors and cables for related accessories.

IPR Medical buys, sells, repairs, and stocks parts for SpO2 adapter cables and the patient monitors they serve. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by Philips, Masimo, or any other manufacturer or supplier named on this page. Philips, Masimo, LNCS, Rainbow, IntelliVue, SureSigns, Heartstream, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.

Weight 1 lbs
Dimensions 8 × 8 × 6 in

Reviews

There are no reviews yet.