-
Baxter Auto Syringe AS50 Infusion Pump
Original price was: $1,995.00.$1,395.00Current price is: $1,395.00.The Baxter Auto Syringe AS50 is a compact, single-channel syringe infusion pump designed for accurate continuous or intermittent delivery of intravenous solutions, drug solutions, whole blood, and packed red blood cells. It supports IV, intra-arterial, epidural, and subcutaneous routes, accepts standard disposable syringes from 1 mL to 60 mL across three manufacturers, and operates on internal rechargeable battery or AC charger for bedside, transport, and ambulatory use.
Pump Type
Single-channel syringe infusion pumpFlow Rate Range
0.01 to 438 mL/hr (syringe-dependent)Compatible Syringes
B-D Plastic, Sherwood Monoject, and Terumo, 1–60 mLDrug Library
Configurable Protocol Library; 18 infusion modesConnectivity
DB-9 RS-232 serial port (remote monitoring/control)Battery
Internal rechargeable pack; 5 hr at 100 mL/hr or 12 hr at 2 mL/hrNotable Features
Bolus, titration, syringe recognition, keypad lock, backlightIPR Medical buys, sells, repairs, and stocks parts for the Baxter Auto Syringe AS50 Infusion Pump. Contact us at 855-477-8866 or cs@iprmed.com.
-
Baxter Flo-Gard 6301
Original price was: $995.00.$895.00Current price is: $895.00.The Baxter Flo-Gard 6301 is a dual-channel linear peristaltic volumetric infusion pump that does the work of two conventional pumps in a single unit mounted to one IV pole. Each of its two independently programmable channels supports full primary and secondary infusion programs, a 10-step Programmed Delivery Profile, volume-time programming, automatic piggybacking, and a dedicated Flow Check display — making the 6301 one of the most capable pumps in the Flo-Gard family.
Both channels share a single control interface with PUMP 1 and PUMP 2 selector keys, keeping the footprint compact while delivering the full feature set of the 6201 on each channel simultaneously. The device runs on 110/120V AC or its internal 12-volt sealed lead-acid battery — approximately 6 hours with one pump running, or approximately 4 hours with both running. Nurse call output, configurable hospital area designator, selectable downstream occlusion and air-in-line sensitivity, five-hour data memory, and an automatic self-test on startup round out a pump built for demanding clinical environments.
The 6301 is an older, discontinued pump, but facilities that rely on it value the space savings and operational efficiency of dual-channel infusion in a single device. IPR Medical maintains a large inventory of Flo-Gard 6301 parts to keep your fleet running strong.
-
Baxter Sigma Spectrum Version 6
Original price was: $995.00.$795.00Current price is: $795.00.The Baxter SIGMA Spectrum Version 6 is one of the most recognizable large-volume infusion pumps in North American acute care — and for good reason. The Spectrum platform built its reputation on one thing: keeping clinicians from making programming errors under pressure. Dose Error Reduction Software (DERS) defaults on at startup, your Master Drug Library enforces soft and hard limits by care area, and the guided bedside workflow means staff spend less time second-guessing and more time focused on the patient.
Flow rates run 0.5 to 999 ml/h with ±5% accuracy, the pump supports a full range of clinical modes including titration on the fly and multi-step ramping, and optional 802.11b/g wireless lets your biomed team push drug library updates and pull CQI data across the fleet remotely. If you’re running Spectrum pumps already, the V6 slots right into your existing infrastructure — same IV sets, same staff training, same wireless backbone. If you’re building a fleet from scratch, it’s a proven platform at a price point that’s hard to argue with.
Also available:
- Baxter Sigma Spectrum Version 8 — enhanced drug library and wireless updates, same proven Spectrum platform
- Baxter Spectrum IQ — full EMR integration with Auto-Programming, Auto-Documentation, and built-in asset tracking
IPR Medical stocks compatible Baxter IV administration sets, so you can source pumps and sets from one place. If you’re building or refreshing a Spectrum fleet on a budget, the V6 delivers the proven platform at a lower cost than later versions, with full repair and parts support from IPR Medical. Call us at 855-477-8866 or reach out at cs@iprmed.com.
-
Sigma Spectrum IQ
Original price was: $2,995.00.$1,995.00Current price is: $1,995.00.The Baxter Spectrum IQ is what happens when you take everything that made the Spectrum platform the most trusted large-volume IV pump in North American hospitals and add a direct line into your EMR. Where the V6 and V8 gave clinicians guided bedside programming, the Spectrum IQ goes a step further: scan the patient, scan the medication, scan the pump — and the infusion order comes over from the EMR and programs the pump automatically. Auto-documentation pushes infusion data back into the patient record without manual entry. That’s fewer keystrokes, fewer transcription errors, and clinicians spending more time with patients instead of at the keyboard.
The Spectrum IQ runs Dose IQ Safety Software Version 9 on top of the proven Spectrum peristaltic platform: 0.5 to 999 ml/h flow range, ±5% accuracy, configurable dose limits by care area, and the full suite of Spectrum programming modes including titration on the fly, multi-step, cyclic TPN, and secondary callback. What’s unique to the IQ is the Dose Rate Change Alert — an added safety layer that intercepts incremental dose or rate changes beyond traditional upper and lower limits, catching the kind of errors that standard hard-limit programming misses. Baxter cites an average of 97% drug library compliance within one month of deployment, which is a real number facilities have reported.
Also available:
- Baxter Sigma Spectrum Version 6 — earlier Spectrum platform for facilities that don’t require full EMR integration
- Baxter Sigma Spectrum Version 8 — enhanced drug library and wireless updates, same proven Spectrum platform
IPR Medical buys, sells, repairs, and stocks parts for the Baxter Spectrum IQ. We also stock compatible Baxter IV administration sets. Call us at 855-477-8866 or email cs@iprmed.com.
-
Sigma Spectrum Version 8
Original price was: $1,495.00.$1,295.00Current price is: $1,295.00.The Baxter SIGMA Spectrum Infusion Pump Version 8 is one of the most trusted large-volume infusion pumps in North American acute care — and for good reason. It combines a wide flow rate range (0.5 to 999 ml/h), a customizable Master Drug Library with up to 32 Care Areas, and configurable Dose Error Reduction Software (DERS) that guides clinicians through safe programming from the moment they power the pump on. A human factors study put the task success rate at 99.1% across all user groups — which is a fancy way of saying it’s genuinely intuitive to use, even under busy clinical conditions.
What makes the Spectrum V8 a smart choice for facilities isn’t just the feature list — it’s the ecosystem. The pump runs on Baxter’s standard CONTINU-FLO IV sets, which work for both gravity and pump infusions, cutting down on setup time and set waste. And because IPR Medical stocks compatible Baxter IV administration sets, you can source pumps and consumables from one place.
Also available:
- Baxter Sigma Spectrum Version 6 — earlier Spectrum platform for facilities that don’t require full EMR integration
- Baxter Spectrum IQ — full EMR integration with Auto-Programming, Auto-Documentation, and built-in asset tracking
IPR Medical buys, sells, repairs, and stocks parts for the Baxter SIGMA Spectrum Version 8. Whether you need a refurbished unit, a replacement part, or fleet service, we’ve got you covered. Call us at 855-477-8866 or reach out at cs@iprmed.com.
-
Baxter Mini-Infuser 300XL Syringe Pump | Multi-Speed
Original price was: $795.00.$495.00Current price is: $495.00.The Baxter Mini-Infuser 300XL is a battery-powered, multi-speed syringe infusion pump originally developed by Bard Medsystems and later distributed by Baxter Healthcare for controlled, intermittent intravenous medication administration. The 300XL adds a three-position rate selector switch to the same chassis used by the single-rate 150XL, allowing the clinician to choose among three plunger drive speeds and infuse standard 5–60 mL disposable syringes over a wider range of durations without changing syringe sizes. It is well suited to short-duration secondary infusions, IV piggyback delivery, and small-volume drug administration in inpatient, outpatient, and ambulatory care settings.
Pump Type
Multi-speed (multispeed) syringe infusion pumpCompatible Syringes
5 mL to 60 mL disposable syringes (B-D, Monoject)Plunger Drive Rates
XLow 1.8 in/hr, Low 2.7 in/hr, Medium 5.5 in/hr (rate selector switch)Power
Four C-size alkaline cells; ~400 hours typical service lifePortability
1.75 lbs with batteries; pole loop and optional mounting bracketNotable Features
Active time scale, anti-syphon latch, occlusion detection, audible/visual alarmsIPR Medical buys, sells, repairs, and stocks parts for the Baxter Mini-Infuser 300XL. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
Baxter Mini-Infuser 150XL — single-rate sister pump on the same chassis |
Baxter Auto Syringe AS40A — programmable syringe pump for continuous and intermittent infusion -
Baxter Mini-Infuser 150XL Syringe Pump
$595.00The Baxter Mini-Infuser 150XL is a battery-powered, single-rate syringe infusion pump originally developed by Bard Medsystems and later distributed by Baxter Healthcare for controlled, intermittent intravenous medication administration. The 150XL accepts standard 5–60 mL disposable syringes and runs at a fixed plunger drive rate, making it well-suited for short-duration secondary infusions, IV piggyback delivery, and small-volume drug administration in inpatient, outpatient, and ambulatory care settings.
Pump Type
Single-rate syringe infusion pumpCompatible Syringes
5 mL to 60 mL disposable syringes (B-D, Monoject)Plunger Drive Rate
5 inches/hr (constant); resulting flow rate varies by syringe sizePower
Four C-size alkaline cells; ~400 hours typical service lifePortability
1.75 lbs with batteries; pole loop and optional mounting bracketIPR Medical buys, sells, repairs, and stocks parts for the Baxter Mini-Infuser 150XL. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
Baxter Mini-Infuser 300XL — multi-speed variant with selectable plunger rates |
Baxter Auto Syringe AS40A — programmable syringe pump for continuous and intermittent infusion -
Baxter InfusO.R.
Original price was: $4,500.00.$3,995.00Current price is: $3,995.00.The Baxter InfusO.R. is a battery-operated syringe infusion pump built for the operating room, where it aids the administration of intravenous agents during anesthetic procedures. Its defining feature is the magnetically coded Smart Label system: the clinician snaps on a drug-specific label, dials the dose in clinical units already scaled to patient weight, and the pump runs — no menus and no reprogramming. The result is a fast, simple, lightweight device long favored by anesthesia providers for vasoactive drips, narcotics, muscle relaxants, and propofol.
Pump Type
Battery-operated syringe infusion pumpSyringe Compatibility
B-D or Monoject, 20 cc and 60 ccFlow Rate Range
0 to 600 mL/hr (Smart Label dependent)Delivery Accuracy
±3% (infusion and bolus)Drug Selection
Magnetic Smart Label system, drug-specificPower & Weight
Four C-cell alkaline, ~150 hr typical; 2 lbsIPR Medical buys, sells, repairs, and stocks parts for the Baxter InfusO.R. Syringe Pump. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
Medfusion 3500 (V6) — programmable syringe pump with PharmGuard drug library |
Baxter Auto Syringe AS50 — programmable next-generation syringe pump |
Baxter AS40A — field-configurable Auto Syringe pumpCompanion accessory:
InfusO.R. Smart Labels — drug-specific magnetic labels (Propofol, Fentanyl, and more) -
Baxter InfusO.R. Smart Labels | Anesthesia Drug Library Labels
$125.00The Baxter InfusO.R. Smart Label is a magnetically coded drug-specific label that attaches to the front panel of the InfusO.R. syringe infusion pump and reconfigures the pump for a specific intravenous anesthetic agent. Each label redefines the pump’s rotary input switches with the correct delivery units, infusion rates, and bolus options for the indicated drug, color-coded by drug class to the ASTM Drug Label Color Standard. IPR Medical stocks Smart Labels across the full InfusO.R. drug library, including narcotics, muscle relaxants, vasopressors, hypotensive agents, induction agents, and General mL/hr labels.
Compatible Pump
Baxter InfusO.R. Syringe Pump (2L3100, 2L3100R1)Label System
Magnetically coded, ten-position library (L01–L10)Drug Classes Covered
Narcotics, muscle relaxants, vasopressors, hypotensive agents, induction agents, otherColor Coding
ASTM Drug Label Color StandardFunction
Redefines pump rotary switches with drug-specific delivery units and ratesAvailable Stock
Multiple individual drug labels; contact IPR Medical for current inventory and pricing per labelIPR Medical buys, sells, repairs, and stocks parts for the Baxter InfusO.R. Smart Labels. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
Baxter InfusO.R. Syringe Pump — the host pump the Smart Labels are designed for |
Baxter Auto Syringe AS50 — anesthesia and critical-care syringe pump with onboard drug library -
Baxter PCA II
$425.00The Baxter – Bard PCA II Pump is a patient-controlled analgesia device designed to provide safe and effective pain management. It allows patients to self-administer predetermined doses of pain medication, ensuring timely and controlled relief. The pump features a lockout interval to prevent overdose, enhancing patient safety. Its user-friendly interface simplifies programming and monitoring for healthcare providers. Compact and portable, the PCA II Pump is suitable for both hospital and home use. The device includes safety alarms to alert users of potential issues, such as occlusions or low battery. Overall, the Baxter – Bard PCA II Pump is a reliable and efficient solution for managing patient pain. -
Baxter Auto Syringe AS40A Infusion Pump
$995.00The Baxter Auto Syringe AS40A is a compact, single-channel syringe infusion pump designed for accurate continuous or intermittent delivery of fluids and medications. It supports IV, intra-arterial, epidural, and subcutaneous routes, accepts standard disposable syringes from 1 mL to 60 mL across three manufacturers, and operates on internal rechargeable battery or AC charger for bedside, transport, and ambulatory use.
Pump Type
Single-channel syringe infusion pumpFlow Rate Range
0.01 to 360 mL/hr (syringe-dependent)Compatible Syringes
B-D Plastipak, Monoject, and Terumo, 1–60 mLBattery
Internal NiCd rechargeable pack; 12 hr at 2 mL/hr (60 mL syringe)Notable Features
Bolus, titration, auto syringe recognition, auto-lock, configurable occlusion sensitivityLooking for a newer alternative? Consider upgrading to the Baxter AS50 — the direct next-generation successor sharing the same compact form factor and syringe compatibility, with an extended flow rate ceiling of 438 ml/h and an upgraded rechargeable battery — or the Medfusion 3500 Version 6, a modern syringe pump with a built-in drug library options and full third-party service support.
Please note: Baxter has ended manufacturer support for the AS40A. IPR Medical buys, sells, and repairs the Baxter AS40A and stocks replacement parts to keep these pumps performing reliably in the field. Contact us at 855-477-8866 or cs@iprmed.com.
-
Baxter Flo-Gard 6200
Original price was: $895.00.$795.00Current price is: $795.00.The Baxter Flo-Gard 6200 is a single-channel volumetric infusion pump built for reliable, accurate intravenous delivery of a wide range of fluids — including blood and fat emulsions — across primary and secondary infusion programs. Operating on standard 115 VAC power or its self-contained rechargeable battery, it delivers flow rates from 1 to 999 mL/hr in 1 mL/hr increments with a VTBI range of 1 to 9,999 mL. Automatic piggybacking switches seamlessly from the secondary program back to the primary when secondary infusion completes, and a built-in safety clamp prevents accidental free flow any time the pump door is opened.
The Flo-Gard 6200 is an older pump — discontinued by Baxter — but it remains one of the most straightforward, dependable large-volume pumps in clinical use today. Hospitals, long-term care facilities, outpatient clinics, and veterinary practices continue to rely on them for good reason: they are simple to load, simple to program, and built to last.
IPR Medical maintains a large inventory of Flo-Gard 6200 parts — including batteries, fuses, pump mechanisms, power cords, and more — to keep your fleet running strong. Whether you need a single unit serviced or a supply of components to support ongoing maintenance, we have what you need.
IPR Medical
0
Cart:
$0.00
No products in the cart.
Shop all products
Shop
