Baxter Flo-Gard 6301 Volumetric Infusion Pump – Recertified
The Baxter Flo-Gard 6301 is a dual-channel linear peristaltic volumetric infusion pump that does the work of two conventional pumps in a single unit mounted to one IV pole. Each of its two independently programmable channels supports full primary and secondary infusion programs, a 10-step Programmed Delivery Profile, volume-time programming, automatic piggybacking, and a dedicated Flow Check display — making the 6301 one of the most capable pumps in the Flo-Gard family.
Both channels share a single control interface with PUMP 1 and PUMP 2 selector keys, keeping the footprint compact while delivering the full feature set of the 6201 on each channel simultaneously. The device runs on 110/120V AC or its internal 12-volt sealed lead-acid battery — approximately 6 hours with one pump running, or approximately 4 hours with both running. Nurse call output, configurable hospital area designator, selectable downstream occlusion and air-in-line sensitivity, five-hour data memory, and an automatic self-test on startup round out a pump built for demanding clinical environments.
The 6301 is an older, discontinued pump, but facilities that rely on it value the space savings and operational efficiency of dual-channel infusion in a single device. IPR Medical maintains a large inventory of Flo-Gard 6301 parts to keep your fleet running strong.
The Flo-Gard line began under the Travenol name, which Baxter used until the late 1980s. The 6301 was introduced under the Baxter name in 1992, but many people still call it the Travenol Flo-Gard 6301, and older Flo-Gard pumps may carry Travenol labels. Whatever name you know it by, IPR Medical buys, sells and repairs it.
Rx only. Sold to healthcare facilities, licensed practitioners and equipment service providers; not sold to patients for home use (Terms §8).
Warranty: IPR Medical limited warranty, 6 months unless a longer period is stated on this page or your invoice; extended warranties available (Terms §5).
Baxter Flo-Gard® 6301 Dual Channel Volumetric Infusion Pump
Dual-channel linear peristaltic volumetric infusion pump with two independently programmable channels — each supporting primary and secondary programs, 10-step PDP, volume-time programming, Flow Check display, and automatic piggybacking. IPR Medical stocks a large inventory of Flo-Gard 6301 parts to keep your fleet running strong.
| Catalog Code | 2M8064 |
| Pump Type | Dual-channel linear peristaltic volumetric infusion pump |
| Channels | 2 — each independently programmable with identical features |
| Flow Rate — Primary (each channel) | 1.0–99.9 mL/hr in 0.1 mL increments; or 1–1,999 mL/hr in 1 mL increments |
| Flow Rate — Secondary (each channel) | 1.0–99.9 mL/hr in 0.1 mL increments; or 1–999 mL/hr in 1 mL increments |
| VTBI Range (each channel) | 1.0–99.9 mL in 0.1 mL increments; or 1–9,999 mL in 1 mL increments (primary and secondary) |
| KVO Rate | 5 mL/hr or programmed rate, whichever is less |
| Programmed Delivery Profile (PDP) | Up to 10 sequential steps per channel — rate/VTBI, VTBI/time, or rate/time entry methods |
| Volume-Time Programming | Yes — automatically calculates flow rate from entered volume and time (up to 99 hrs 99 min) |
| Automatic Piggybacking | Yes — each channel automatically switches from secondary to primary on completion |
| Air-in-Line Detection | Ultrasonic; NORM: ~75 µL or larger; MIN: ~50 µL or larger (selectable per configuration) |
| Occlusion Detection | Upstream and downstream per channel; downstream sensitivity selectable (Level 1: ~7 psig, Level 2: ~12 psig, Level 3: ~17 psig) |
| Free-Flow Protection | Automatic safety clamp occludes tubing when each pump door is opened |
| Flow Check Display | Independent display per channel; shows resistance to flow from norm baseline to occlusion threshold |
| Panel Lockout | Yes — rear PANEL LOCK switch; TOT VOL/STATUS and BACK LIGHT remain accessible while locked |
| Alarm Log | Last 10 alarm codes stored per channel with date and time stamp |
| Memory | 5-hour retention of infusion data after power-off |
| Computer Interface | RS-232C via COMMUNICATIONS PORT; remote control and/or monitoring; configurable baud rate (300–9600) |
| Nurse Call | Available via COMMUNICATIONS PORT |
| Hospital Area Designator | Configurable on-screen display at power-up (e.g. ONCOLOGY, CARDIAC ICU, NICU, PICU, ICU, OR) |
| Epidural Use | Suitable for epidural administration |
| IV Administration Set | Baxter’s OEM standard sets; luer lock recommended for central line catheters |
| Power — AC | 110/120V, 60 Hz |
| Power — DC (Battery) | 12V, 3.2 Ah sealed lead-acid rechargeable |
| Battery Life — One Channel | Approx. 6 hours at 1–1,400 mL/hr |
| Battery Life — Both Channels | Approx. 4 hours at 1–1,400 mL/hr per channel |
| Battery Recharge | 8 hours for >80% recharge; automatic when plugged in |
| Power Cord | 2.9 m (9.5 ft), hospital-grade plug, replaceable |
| Fuse | 0.8A, 250V, SB, 5.2 mm × 20 mm; user-replaceable |
| Leakage Current | Less than 50 microamps (per UL 544) |
| Dimensions (W × D × H) | 33 cm × 13 cm × 29 cm (13 in × 5.1 in × 11.4 in) |
| Weight | 8.1 kg (17.9 lbs) |
IPR Medical maintains a large inventory of Flo-Gard 6301 parts — including batteries, fuses, power cords, pump mechanisms, and more. Contact us to keep your fleet running strong.
Trademark Notice: Baxter, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the original manufacturer’s equipment offered here, consistent with nominative fair use. This listing is offered by IPR Medical, an ISO 9001:2015-certified independent service organization, and is not sponsored by, affiliated with, or endorsed by Baxter.
Quick answer: The Baxter Flo-Gard 6301 is a discontinued dual-channel volumetric infusion pump that does the work of two pumps on one IV pole, with independent primary and secondary programs on each channel. IPR Medical sells recertified, patient-ready 6301 pumps backed by IPR Medical’s warranty, repairs them, and stocks parts such as batteries and pump mechanisms.
Two pumps. One device. One IV pole.
The Baxter Flo-Gard 6301 takes everything in the 6201 and doubles it. Two separate linear peristaltic pump heads share a single housing and a single mounting point on the IV pole, allowing simultaneous infusion of two independent solutions without the space, cost, or management overhead of two separate pumps. Each channel is fully independent — its own ON/OFF key, STOP key, primary and secondary programs, VTBI tracking, alarm and alert LEDs, and PDP — all controlled through a shared keypad by selecting PUMP 1 or PUMP 2. For facilities managing patients who require concurrent infusions, the 6301 is the more efficient solution.
Full 6201 feature set on each channel
Each channel of the 6301 delivers the complete clinical feature set of the single-channel 6201: flow rates from 0.1 mL/hr precision at low rates up to 1,999 mL/hr primary, a 10-step Programmed Delivery Profile with rate/VTBI, VTBI/time, or rate/time programming methods, volume-time programming with automatic flow rate calculation, automatic piggybacking, an independent Flow Check display, selectable ultrasonic air-in-line detection, and selectable downstream occlusion sensitivity at three pressure levels. Both channels are also suitable for epidural administration.
Configurable for your facility
The 6301 offers an extensive configuration menu accessible to authorized biomedical personnel. Configurable options include occlusion alarm level (3 pressure settings), air bubble alarm size, auto restart count after occlusion, audible switchover notification, alarm and alert off intervals, maximum flow rate and VTBI limits, PDP memory mode (five-hour, semi-permanent, or permanent), and computer control behavior. The hospital area designator feature displays a custom unit label — such as ONCOLOGY, CARDIAC ICU, NICU, PICU, or OR — on the Pump 1 message display for three seconds at every power-on, helping visually confirm the pump is in the right care area.
RS-232, nurse call, and alarm logging
The COMMUNICATIONS PORT on the rear provides an RS-232C interface for remote computer control and monitoring, as well as the nurse call signal output. Computer control and monitoring are independently configurable — the pump can be set to remain in computer control through alarms, drop out on alarms, or disable computer control entirely. The device also stores the last 10 alarm codes per channel with date and time stamps for service review. Five-hour data memory retains programming after power interruptions.
IPR Medical keeps your Flo-Gard 6301 fleet running
The Flo-Gard 6301 is a discontinued product, but facilities that depend on dual-channel infusion continue to rely on it. IPR Medical maintains a large inventory of Flo-Gard 6301 replacement parts — batteries, fuses, power cords, pump mechanisms, and more — to keep your units in service rather than waiting on parts. Every pump we sell is fully inspected, tested, and patient-ready before it ships.
Need parts, repairs, or fleet pricing? IPR Medical stocks a large inventory of Baxter Flo-Gard 6301 components. Contact us for parts availability, repair turnaround, and volume pricing on units and parts.
Frequently asked questions
How long does the Flo-Gard 6301 run on battery?
The 6301 runs on 110/120V AC or an internal 12-volt sealed lead-acid battery that provides about 6 hours with one pump running, or about 4 hours with both channels running. Five-hour data memory retains programming after a power interruption, so a brief outage does not require full reprogramming.
What is the difference between the Flo-Gard 6301 and 6201?
The 6301 puts two independent 6201-style channels in one housing. Each channel has its own primary and secondary programs, 10-step Programmed Delivery Profile, Flow Check display, and selectable air-in-line and occlusion sensitivity, all run from a shared keypad using the PUMP 1 and PUMP 2 keys.
Can IPR Medical keep our Flo-Gard 6301 fleet running?
Yes. IPR Medical stocks Flo-Gard 6301 replacement parts and repairs the pumps in-house. U.S. customers can request a free inbound shipping label through our RMA form and approve a written estimate before work begins. Repaired pumps are tested and cleaned, and repairs carry a 90-day warranty.
Repair service: IPR Medical also repairs Baxter pumps in house, with a free shipping label, a free evaluation and a 90-day repair warranty. See Baxter pump repair.
Trademark Notice: Baxter, Travenol, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the original manufacturer’s equipment offered here, consistent with nominative fair use. This listing is offered by IPR Medical, an ISO 9001:2015-certified independent service organization, and is not sponsored by, affiliated with, or endorsed by Baxter.
Buying a recertified Baxter Flo-Gard 6301 from IPR Medical
Every Baxter Flo-Gard 6301 sold by IPR Medical is a recertified unit that is inspected and tested by our team before it ships. Orders have a handling time of 1–2 business days, with $25 flat-rate shipping within the US (Alaska and Hawaii $80). Returns are accepted within 30 days, returned by mail, subject to a 25% restocking fee; see our returns policy for details.
Not sure this is the right model or version for your facility? Contact IPR Medical before you order and we will confirm compatibility and availability. You may also want to look at: Flo-Gard 6201.
| Weight | 18 lbs |
|---|---|
| Dimensions | 16 × 16 × 16 in |
| Condition: | Recertified (Refurbished) |
- Power Cord
Reviews
There are no reviews yet.