IPR Medical

  • -19%
    New
    Quick View

    Compatible GE Corometrics Toco Fetal Transducer, Wings, 2264LAX

    Original price was: $325.00.Current price is: $264.00.

    Reliable fetal monitoring starts with the right transducer. This compatible toco (tocodynamometer) transducer is a direct replacement for the GE Corometrics 2264LAX, providing accurate external monitoring of uterine contraction frequency, duration, and relative pressure throughout labor and delivery. The wing (loop) style connector secures firmly into GE Corometrics fetal monitors and stays fixed to the maternal abdomen with a standard monitoring belt. The low-profile, flat design prioritizes patient comfort during extended monitoring sessions, while the watertight construction withstands routine cleaning and disinfection between patients.

    This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:

    Series
    Compatible Models

    100 Series
    116, 118, 120, 128, 129, 130, 145, 150, 151, 155

    170 Series
    170, 171, 172, 173, 174

    250 Series
    250, 250cx, 256cx, 259, 259cx

    300 Series
    340

    IPR Medical stocks this compatible replacement transducer so your labor and delivery team can keep monitoring without delays. Call us at 855-477-8866 or email cs@iprmed.com.

  • -13%
    New
    Quick View

    Compatible GE Corometrics TOCO Fetal Transducer, Knob, 2264HAX

    Original price was: $375.00.Current price is: $325.00.

    Reliable fetal monitoring starts with the right transducer. This compatible toco (tocodynamometer) transducer is a direct replacement for the GE Corometrics 2264HAX, providing accurate external monitoring of uterine contraction frequency, duration, and relative pressure throughout labor and delivery.

    The knob (button) style connector threads securely into the corresponding port on GE Corometrics fetal monitors and locks the transducer in place against the maternal abdomen with a standard monitoring belt. The low-profile, flat design prioritizes patient comfort during extended monitoring sessions, while the watertight construction withstands routine cleaning and disinfection between patients.

    This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:

    Series
    Compatible Models

    100 Series
    116, 118, 120, 128, 129, 130, 145, 150, 151, 155

    170 Series
    170, 171, 172, 173, 174

    250 Series
    250, 250cx, 256cx, 259, 259cx

    300 Series
    340

    IPR Medical stocks this compatible replacement transducer so your labor and delivery team can keep monitoring without delays. Call us at 855-477-8866 or email cs@iprmed.com.

  • -9%
    New
    Quick View

    Compatible GE Corometrics Ultrasound Fetal Transducer, Knob, 5700HAX

    Original price was: $325.00.Current price is: $297.00.

    Accurate fetal heart rate monitoring during labor starts with a reliable ultrasound transducer. This compatible GE Corometrics Nautilus ultrasound fetal transducer is a direct replacement for the 5700HAX, using pulsed Doppler technology to continuously detect and display fetal heart rate on your GE Corometrics fetal monitor. The knob (button) style proximal connector threads securely into the monitoring belt for a positive, locked attachment that stays in place during patient repositioning.

    The 9-crystal array provides a wide focal region for dependable signal pickup across a range of fetal positions and maternal body types, and the watertight construction supports in-water monitoring and thorough between-patient disinfection.

    This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:

    Series
    Compatible Models

    100 Series
    116, 118, 120, 128, 129, 130, 145, 150, 151, 155

    170 Series
    170, 171, 172, 173, 174

    250 Series
    250, 250cx, 256cx, 259, 259cx

    300 Series
    340

    IPR Medical stocks this compatible replacement ultrasound transducer so your labor and delivery team always has a ready replacement on hand. Call us at 855-477-8866 or email cs@iprmed.com.

  • RecertifiedQuick View

    GE E-sCAiO CARESCAPE Respiratory Module | 5-Agent, Sidestream

    The GE E-sCAiO is a single-width, small-form-factor plug-in respiratory module from GE Healthcare’s CARESCAPE Respiratory Module family — the next-generation successor to the original Compact Airway Module line (E-CAiO/E-COV). It uses sidestream sampling and GE infrared and paramagnetic sensor technology to measure inspired and end-tidal CO2, N2O, O2, and all five common anesthetic agents (halothane, enflurane, isoflurane, sevoflurane, desflurane) with automatic agent identification and two-agent mixture detection.

    The “s” denotes the small footprint that frees up slot space in the CARESCAPE B650 for the Entropy module or other parameter modules. The E-sCAiO is the gas-and-agent-only variant — without patient spirometry (V) or gas exchange (X) — and is compatible with CARESCAPE B450, B650, and B850 monitors, the B40 monitor, and the Aisys CS2, Avance CS2, and Carestation 620/650/650c anesthesia workstations.

    Module Type
    Single-width, small-form-factor sidestream respiratory module

    Parameters
    CO2, N2O, O2, 5-agent AA with identification, respiration rate

    Anesthetic Agents
    Halothane, enflurane, isoflurane, sevoflurane, desflurane (2-agent mixture detection)

    Sampling
    Sidestream, 120 ±20 ml/min, single sample line at patient airway

    Compatible Hosts
    CARESCAPE B450/B650/B850, B40(i); Aisys CS2, Avance CS2, Carestation 620/650/650c

    Standards
    IEC 60601-1 3rd edition compliant

    IPR Medical buys, sells, repairs, and stocks parts for the GE E-sCAiO CARESCAPE Respiratory Module. Contact us at 855-477-8866 or cs@iprmed.com.

  • RecertifiedQuick View

    GE E-CAiO Compact Airway Module | 5-Agent, CO2/N2O/O2, Sidestream

    The GE E-CAiO is a single-width plug-in airway gas module for CARESCAPE Monitor B450, B650, and B850 platforms, S/5 modular monitors, and AS/3 anesthesia monitors. It uses sidestream sampling and GE infrared/paramagnetic sensor technology to measure inspired and end-tidal CO2, N2O, O2, and all five common anesthetic agents (halothane, enflurane, isoflurane, sevoflurane, desflurane), with automatic agent identification and detection of two-agent mixtures. The E-CAiO is the entry-level Compact Airway Module in the C-A-i-O family — without patient spirometry (V) or gas exchange (X) — making it the right choice for OR and PACU environments that need full anesthetic agent monitoring but rely on the anesthesia machine’s own ventilator for spirometry.

    Module Type
    Single-width plug-in sidestream airway gas module

    Parameters
    CO2, N2O, O2, 5-agent AA with identification, respiration rate

    Anesthetic Agents
    Halothane, enflurane, isoflurane, sevoflurane, desflurane (2-agent mixture detection)

    Sampling
    Sidestream, 200 ±20 ml/min, single sample line at patient airway

    Compatible Hosts
    CARESCAPE B450/B650/B850; S/5, AS/3, CS/3 modular monitors

    Patient Population
    Adult, pediatric, neonatal

    IPR Medical buys, sells, repairs, and stocks parts for the GE E-CAiO Compact Airway Module. Contact us at 855-477-8866 or cs@iprmed.com.

  • RecertifiedQuick View

    GE E-PSM Patient Side Module | CARESCAPE & S/5, 12-Lead, NIBP

    The GE E-PSM is a single-width plug-in hemodynamic acquisition module for the CARESCAPE B650, CARESCAPE B850, CARESCAPE B450, and S/5 modular monitor platforms. It combines 12-lead ECG with ST segment analysis, impedance respiration, GE SpO2 with plethysmography, two temperature channels, and DINAMAP-based NIBP in a single module. The E-PSM is the non-IBP variant of the E-PSMP — same ECG, SpO2, NIBP, temperature, and respiration capabilities, without the two invasive pressure channels — making it the right consolidation choice for med-surg, step-down, PACU, and general ward environments where invasive lines are not part of the standard workflow.

    Module Type
    Single-width plug-in hemodynamic acquisition module

    Parameters
    ECG, ST, Impedance Respiration, SpO2, NIBP, 2x Temperature

    ECG Configuration
    3-, 5-, 6-, or 10-leadwire (3-, 7-, 8-, or 12-lead in CARESCAPE)

    SpO2 Technology
    GE SpO2 (Masimo and Nellcor available via separate modules)

    NIBP Algorithm
    GE DINAMAP, oscillometric

    Compatible Hosts
    CARESCAPE B450/B650/B850, S/5 modular (via F5/F7 frame or Module Bus Adapter)

    IPR Medical buys, sells, repairs, and stocks parts for the GE E-PSM Patient Side Module. Contact us at 855-477-8866 or cs@iprmed.com.

  • RecertifiedQuick View

    GE E-PSMP Patient Side Module | CARESCAPE & S/5, 12-Lead, Dual IBP

    The GE E-PSMP is a single-width plug-in hemodynamic acquisition module for the CARESCAPE B650, CARESCAPE B850, CARESCAPE B450, and S/5 modular monitor platforms. It combines 12-lead ECG with ST segment analysis, impedance respiration, GE SpO2 with plethysmography, dual invasive pressures (P1, P2), two temperature channels, and DINAMAP-based NIBP in a single module — making it the most fully featured hemodynamic module in the E-Series catalog and a common consolidation choice for OR, ICU, PACU, and step-down environments.

    Module Type
    Single-width plug-in hemodynamic acquisition module

    Parameters
    ECG, ST, Impedance Respiration, SpO2, NIBP, 2x IBP, 2x Temp

    ECG Configuration
    3-, 5-, 6-, or 10-leadwire (3-, 7-, 8-, or 12-lead in CARESCAPE)

    SpO2 Technology
    GE SpO2 (Masimo and Nellcor available via separate modules)

    NIBP Algorithm
    GE DINAMAP, oscillometric

    Compatible Hosts
    CARESCAPE B450/B650/B850, S/5 modular (via F5/F7 frame or Module Bus Adapter)

    IPR Medical buys, sells, repairs, and stocks parts for the GE E-PSMP Patient Side Module. Contact us at 855-477-8866 or cs@iprmed.com.

  • RecertifiedQuick View

    GE CARESCAPE PDM Patient Data Module | DINAMAP, 12-Lead ECG

    The GE CARESCAPE Patient Data Module (PDM) is a transportable, self-powered acquisition module that captures all hemodynamic monitoring data from the patient and stays with them throughout intra-hospital transport. The PDM docks into the GE CARESCAPE B450, B650, and B850 host monitors, the Solar 8000 family, and the Transport Pro device — collecting 3-, 5-, 6-, and 10-leadwire ECG with 12SL diagnostic 12-lead and optional 12RL derived 12-lead, EK-Pro four-lead arrhythmia, DINAMAP SuperSTAT NIBP, up to 4 invasive pressures, 2 temperatures, optional cardiac output, and SpO2 (Masimo SET or Nellcor OxiMax). Its onboard lithium-ion battery, 24-hour data buffer, and ability to power the Transport Pro during low-battery conditions make it the GE platform’s answer to data continuity during patient movement.

    Module Type
    Docking acquisition module with onboard battery and data storage

    Parameters Acquired
    ECG, respiration, NIBP, SpO2, temperature (2), invasive pressure (up to 4), cardiac output

    Patient Population
    Adult, pediatric, neonatal — one patient at a time

    Compatible Host Monitors
    CARESCAPE B450, B650, B850; Solar 8000 / 8000M / 8000i; Transport Pro

    Battery / Portability
    Removable Li-Ion 11.1 V, 1.8 Ah; ~1.5 hour runtime; 2.9 lbs with battery

    Notable Features
    12SL diagnostic ECG, optional 12RL derived 12-lead, DINAMAP SuperSTAT NIBP, EK-Pro four-lead arrhythmia, 24-hour data storage with 36 arrhythmia events

    IPR Medical buys, sells, repairs, and stocks parts for the GE CARESCAPE PDM. Contact us at 855-477-8866 or cs@iprmed.com.

  • RecertifiedQuick View

    GE CARESCAPE V100 DINAMAP Vital Signs Monitor | NIBP, SpO2

    The GE CARESCAPE V100 DINAMAP is a battery-powered, transportable vital signs monitor designed for sub-acute and low-acuity care areas — emergency departments, medical-surgical units, recovery, labor and delivery, endoscopy, cardiac step-down, satellite clinics, and physicians’ offices. Built on the proven DINAMAP NIBP platform, the V100 supports DINAMAP SuperSTAT, Classic, or Auscultatory Reference algorithms, three SpO2 technology options (GE Ohmeda TruSignal, Nellcor OxiMax, or Masimo SET), and three temperature options (Exergen TemporalScanner, Alaris Turbo Temp, or Alaris Tri-Site). It can run as a spot-check device or in continuous monitoring mode, weighs 5.4 lbs with battery, and provides up to 11 hours of typical battery life on a single charge.

    Display
    Large red LED numerical display visible from across the room

    Parameters Monitored
    NIBP (systolic, diastolic, MAP), pulse rate, optional SpO2, optional temperature

    Patient Population
    Adult, pediatric, neonatal — one patient at a time

    Battery / Portability
    Sealed lead acid 6V, up to 11 hours typical runtime; 5.4 lbs with battery; recessed handle, IPX1 water resistance

    Connectivity
    DB15 host communications port; supports USB, RS-232, and IrDA accessories; DINAMAP Serial Hub for up to three accessories

    Notable Features
    DINAMAP SuperSTAT NIBP (14-second determination), optional integrated thermal printer, 40-measurement memory over 24 hours

    IPR Medical buys, sells, repairs, and stocks parts for the GE CARESCAPE V100 DINAMAP. Contact us at 855-477-8866 or cs@iprmed.com.

  • Recertified
    Quick View

    GE Dash 4000 Patient Monitor | 10.4″ Display, Transportable

    The GE Dash 4000 is a transportable multi-parameter patient monitor with a 10.4-inch active-matrix color display, designed for the emergency department, surgery center, OR, PACU, ICU, and step-down unit. Its rugged enclosure, integrated battery operation, optional wireless networking, and built-in thermal recorder make it well suited for both bedside monitoring and intra-hospital transport. Standard parameters include ECG with EK-Pro arrhythmia and 12SL diagnostic 12-lead ECG, DINAMAP SuperSTAT NIBP, impedance respiration, SpO2 (GE Ohmeda, Masimo SET, or Nellcor OxiMax), and temperature, with optional invasive pressure (up to 4 channels), CO2, BISx, and ICG.

    Display
    10.4 in active-matrix color TFT, 640 x 480 pixels, up to 7 waveforms

    Parameters Monitored
    ECG, NIBP, impedance respiration, SpO2, temperature; optional IBP (up to 4), CO2, BISx, ICG, SAM

    Patient Population
    Adult, pediatric, neonatal

    Battery / Portability
    Up to 2 exchangeable Li-Ion batteries; 12.6 lbs; integrated handle; optional Dash Port 2 docking station

    Connectivity
    CARESCAPE Network (formerly Unity Network); LAN 10BASE-T; optional 802.11 a/b/g WLAN

    Notable Features
    12SL diagnostic ECG with ACI-TIPI, EK-Pro arrhythmia, IntelliRate alarm reduction, optional in-built thermal writer

    IPR Medical buys, sells, repairs, and stocks parts for the GE Dash 4000. Contact us at 855-477-8866 or cs@iprmed.com.

  • Recertified
    Quick View

    GE CARESCAPE B450 Patient Monitor | Touchscreen, Transportable

    The GE CARESCAPE B450 is a 12-inch touchscreen multi-parameter patient monitor designed for flexible-acuity care areas including emergency departments, PACU, ICU, NICU, step-down units, and surgery centers. Built on the CARESCAPE monitoring platform, the B450 supports the CARESCAPE Patient Data Module (PDM), Patient Side Module (E-PSM/E-PSMP), and a single-width E-module slot, making it capable of continuous hemodynamic, respiratory, and neurophysiological monitoring at the bedside and during intra-hospital transport. Wireless and LAN connectivity, internal lithium-ion batteries, and care-area-specific software packages (OR, PACU, ICU, NICU, ED) make it one of the most versatile transportable monitors GE has produced on the Bx50 platform.

    Display
    12 in TFT LCD touchscreen, 1024 x 768 (XGA), 6 traces max

    Parameters Monitored
    ECG (3/5/6/10 lead), SpO2, NIBP, IBP, temperature, CO2, agents, BIS, Entropy, NMT, EEG, CCO, SvO2 (via PDM, E-PSM/E-PSMP, and E-modules)

    Patient Population
    Adult, pediatric, neonatal

    Battery / Portability
    1 or 2 exchangeable Li-Ion batteries, up to 3.5 hours runtime; integrated carrying handle, GCX and FM Quick-Mount compatible

    Connectivity
    CARESCAPE Network, S/5 Network, MUSE, Unity Network ID; LAN (3x RJ45), optional WLAN 802.11a/b/g

    Notable Features
    12SL diagnostic ECG, DINAMAP SuperSTAT NIBP, EK-Pro arrhythmia, optional in-built thermal recorder

    IPR Medical buys, sells, repairs, and stocks parts for the GE CARESCAPE B450. Contact us at 855-477-8866 or cs@iprmed.com.

  • Recertified
    Quick View

    GE CARESCAPE B650 Patient Monitor | 15″ Touchscreen, Modular

    The GE CARESCAPE B650 is a multi-parameter patient monitor intended for use in multiple areas and intrahospital transport within a professional healthcare facility. Built on the CARESCAPE platform, it combines a 15-inch touchscreen, a pivoting module frame, and compatibility with the Patient Data Module (PDM) and E-series plug-in modules for flexible clinical coverage across CCU, PACU, ED, NICU, and OR environments. The B650 supports EK-Pro arrhythmia analysis, 12SL ECG diagnostics, and integration with CARESCAPE Network-connected systems such as MUSE and CARESCAPE Central Station.

    Display
    15-inch color LCD touchscreen

    Parameters Monitored
    ECG, arrhythmia, ST, NIBP, SpO₂, IBP, temperature, respiration, CO₂, anesthetic agents, O₂, N₂O, and additional parameters via PDM/E-modules

    Patient Population
    Adult, pediatric, and neonatal

    Battery / Portability
    Optional internal lithium-ion battery supports intrahospital transport

    Connectivity
    CARESCAPE Network MC and IX; wired and wireless options; MUSE and Central Station integration

    Notable Features
    Pivoting module frame, PDM support, EK-Pro arrhythmia, 12SL diagnostic ECG, hardened Linux OS

    IPR Medical buys, sells, repairs, and stocks parts for the GE CARESCAPE B650 Patient Monitor. Contact us at 855-477-8866 or cs@iprmed.com.