-
B Braun Outlook 100es
The Outlook ES is intended for use with B. Braun Medical Inc. Horizon Pump IV Sets to regulate the flow of primary and secondary fluids when positive pressure is required. The infusion system is capable of delivering fluid from a negative head height (when the IV fluid container is lower than the pump), and provides clinically accepted volumetric accuracy for all standard IV fluids, including blood, lipids, and Total Parenteral Nutrition (TPN).
Positive pressure is frequently a necessity, but clinical experience shows that high pressure limits may increase the severity of an infiltration without causing an alarm. Because there is a need to control pump pressure settings, the Outlook ES has user-selectable Occlusion Limit settings which start at 75 mmHg and extend to 500 mmHg. For epidural infusions which require higher pressures, the pump has an extended occlusion limit setting of 750 mmHg.
The pump is equipped with distinct audible and visual alarm signals to indicate Keep Vein Open (KVO), low battery, and other alarm conditions.
Features
- Promotes patient safety by helping to avoid accidental under- or overdosing using audible and visual alerts for soft/hard dose limits.
- Provides the ability to customize up to 300 drugs and 15 care areas to match your drug formulary, using the expanded DoseGuard drug library.
- Provides reliable operation and accuracy using a proven delivery mechanism.
- Provides comprehensive “at-a-glance” viewing of infusion status on a large color screen.
- Promotes quick and easy drug selection using an active alphabetic drug library matrix.
- Promotes safer and more confident programming with color-coded key pad and audible key clicks.
-
B Braun Outlook 100
The Outlook™ 100 is intended for use with B. Braun Medical Inc. Horizon® Pump IV Sets to regulate the flow of primary and secondary fluids when positive pressure is required. The infusion system is capable of delivering fluid from a negative head height (when the IV fluid container is lower than the pump), and provides clinically accepted volumetric accuracy for all standard IV fluids, including blood, lipids, and Total Parenteral Nutrition (TPN).
Positive pressure is frequently a necessity, but clinical experience shows that high pressure limits may increase the severity of an infiltration without causing an alarm. Because there is a need to control pump pressure settings, the Outlook ES has user-selectable Occlusion Limit settings which start at 75 mmHg and extend to 750 mmHg.
The pump is equipped with distinct audible and visual alarm signals to indicate Keep Vein Open (KVO), low battery, and other alarm conditions.
Features
- Promotes patient safety by helping to avoid accidental under- or overdosing using audible
- and visual alerts
- Provides flexibility for each care area—ability to customize dose limits to your hospital drug formulary
- Promotes clinician choice with dose limit override when limits are exceeded during manual programming and titration
- Visually indicates dose selection with DoseGuard™ software
- Easy to learn:
– Manual operation RATE, VOLUME, RUN
– Automatic Dose Rate Calculator
– Large, highly visible keys
- Reduce nuisance air-in-line alarms with air-trapping cassette
- Stackable modular design reduces bedside cord clutter and errors due to channel confusion
- Comprehensive line of needle-free administration sets including UV light resistant tubing that protects drug efficacy
-
Hospira Gemstar Blue
The GemStar Pump is a small and lightweight, single-channel infusion device designed for use in the home, in the hospital, or anywhere electronic infusion is required. The GemStar Pump can be powered by AC mains adaptor, rechargeable battery pack, docking station, or two disposable AA alkaline or lithium batteries. When powered by batteries, the GemStar Pump is ideal for ambulatory patients.
Hospira Gemstar Blue Offers 7 Therapy Features:
- Pain Management
- TPN
- Continuous
- Variable Time
- Weight Dosed
- Intermittent
- mL/hr Only
-
Eitan Medical/ Q Core Sapphire Epidural
The Eitan Medical Sapphire Epidural pump is a dedicated epidural infusion pump built on the proven Sapphire platform. Purpose-built for epidural applications, it features yellow-colored tubing, a yellow faceplate, and on-screen yellow labeling — the internationally recognized color coding for epidural lines — to reduce the risk of misconnection at the point of care.
The Sapphire Epidural delivers three specialized modes: PCEA (patient-controlled epidural analgesia) with optional basal rate and loading dose, Intermittent Epidural with scheduled doses and optional basal rate, and PIEB (programmed intermittent epidural bolus), which combines intermittent scheduled doses with PCEA while giving priority to the intermittent dose to ensure delivery and prevent dose stacking. Flow rates are limited to safe epidural ranges, with a continuous rate of 0–25 mL/h and bolus rates at selectable levels. At 418 g without battery and running approximately 24 hours on a single charge, it is compact enough for labor and delivery, OR, and ambulatory pain management settings.
IPR Medical is one of the few authorized Level 2 Eitan Medical service centers in the United States. We perform manufacturer-authorized repairs, preventive maintenance, and warranty service on all Sapphire pumps — keeping your fleet compliant and calibrated without shipping units back to the manufacturer.
-
Eitan Medical/ Q Core Sapphire Multi-Therapy
The Eitan Medical Sapphire Multi-Therapy is a complete infusion system for varied clinical uses in hospital, ambulatory, and EMS settings. Combining high-end volumetric infusion pump functionality with compact size and low weight, it is designed for PCA, TPN, Continuous, Piggyback, Intermittent, and Epidural treatments — all on a single platform with one standard interface.
Built on Eitan Medical’s patented Flow Control Technology with an intuitive touchscreen and robust hardware, the Sapphire delivers medication infusion confidence across the full continuum of care — from hospitals and infusion centers to homecare and pre-hospital medical transport. It is approved for both air and ground medical transportation, weighs just 418 g without battery, and runs approximately 24 hours on a single charge.
IPR Medical is one of the few authorized Level 2 Eitan Medical service centers in the United States. We perform manufacturer-authorized repairs, preventive maintenance, and warranty service on all Sapphire pumps — keeping your fleet compliant and calibrated without sending units back to the manufacturer.
-
CADD Legacy PCA 6300
The Smiths Medical CADD-Legacy® PCA (Model 6300) is the dedicated pain management model in the CADD-Legacy® ambulatory infusion family, purpose-built for patient-controlled analgesia and clinician-managed analgesic protocols. It supports three delivery modes — a programmable continuous background infusion, a patient-activated demand dose via pump button or remote dose cord, and a clinician-administered bolus — giving the care team and patient precisely the level of control their protocol requires. The 6300 can be programmed in ml, mg, or mcg units with concentration entry, accommodating a wide range of opioid and non-opioid analgesic regimens across intravenous, subcutaneous, epidural, subarachnoid, and other routes.
System delivery accuracy is ±6% (nominal), weight is 0.86 lbs on two AA alkaline batteries, and battery life reaches approximately 40 hours at a moderate continuous rate of 30 ml/hr — or approximately 14 days at low-rate protocols — supporting home PCA patients between pharmacy or clinic visits. The 6300 shares the same 1,000-event downloadable audit trail, three-level security lock system, and full alarm suite as the rest of the CADD-Legacy® family.
IPR Medical buys, sells, repairs, and stocks parts and administration sets for the Smiths Medical CADD-Legacy® PCA (Model 6300). Contact us at 855-477-8866 or cs@iprmed.com.
-
CADD Legacy Plus 6500
The Smiths Medical CADD-Legacy® PLUS (Model 6500) expands on the CADD-Legacy® continuous infusion platform with the addition of a fully programmable intermittent delivery mode — making it a versatile choice for therapies that require both steady background infusion and scheduled bolus dosing. The 6500 supports rates from 0.1 to 125 ml/hr in continuous mode and dose volumes up to 1,000 ml in intermittent mode, with an internal clock that keeps scheduled doses on time automatically. This makes it particularly well suited for ambulatory antibiotic protocols (OPAT), cyclic parenteral nutrition, hydration regimens, and other time-dependent therapies administered in home or outpatient settings.
The 6500 features the same proven safety architecture as the rest of the CADD-Legacy® family: upstream and downstream occlusion sensors, adjustable air-in-line detection, cassette detection, a three-level security lock system, and a 1,000-event downloadable pump history. System delivery accuracy is ±6% (nominal).
IPR Medical buys, sells, repairs, and stocks parts and administration sets for the Smiths Medical CADD-Legacy® PLUS (Model 6500). Contact us at 855-477-8866 or cs@iprmed.com.
-
CADD Prizm VIP
The CADD-Prizm® ambulatory infusion pump provides measured medication therapy to patients in hospital or outpatient settings. The CADD-Prizm® pump is indicated for intravenous, intra-arterial, subcutaneous, intraperitoneal, epidural space, or subarachnoid space infusion. PCA delivery is intended for therapies that require a continuous rate of infusion, patient-controlled demand doses, or both (such as patient-controlled analgesia). Continuous delivery allows the infusion of drug at a constant, programmed rate while intermittent delivery allows the infusion of a specific volume of drug at a regular, programmed interval. The final delivery program, TPN (Total Parenteral Nutrition), allows the infusion of nutritional solutions or other fluids, with optional tapering at the beginning and end of infusion.
Features
- Easy to read display
- Reliable and Durable
- Programming flexibility
- Air-in-Line detector
- Event memory log
- Lock levels for patient safety
-
CADD Solis 2100
The Smiths Medical CADD®-Solis 2100 is a compact, ambulatory infusion pump built for patients who need reliable pain management therapy — in the hospital and at home. Weighing just 1.31 lbs with batteries installed, it delivers continuous, PCA, intermittent bolus, clinician bolus, and Programmed Intermittent Epidural Bolus (PIB) therapy through a single portable platform. Color-coded visual alarms, on-screen graphs, and a therapy-oriented interface reduce training time and give clinicians instant insight into delivery status and patient activity.
The CADD-Solis 2100 is built around the PharmGuard® Medication Safety Software ecosystem, allowing pharmacists to load customized drug libraries, set soft and hard dose limits, and push protocol updates directly to pumps — including wirelessly when the optional Communication Module is installed.
IPR Medical buys, sells, and repairs the CADD-Solis 2100 and stocks replacement parts. Whether your facility is expanding its fleet, replacing a damaged unit, or needs a trusted service partner for ongoing maintenance and software updates, IPR Medical is ready to help. Contact us at 855-477-8866 or cs@iprmed.com.
-
Triumph Veterinary Syringe Pump SP12
The Triumph SP12 is a veterinary syringe pump with a 4.3-inch color touchscreen, dual battery (9+ hour runtime), and support for 9 preinstalled syringe brands across sizes from 3 to 60 ml. It covers the core infusion modes and mounts to an IV pole or cage with the included pole clamp.
For practices looking for a more advanced veterinary syringe pump with larger drug library support, expanded infusion modes, and IPR’s direct repair and parts backing, consider the IPR PETfusion™ or IPR InfuPet™ — purpose-built by IPR Medical specifically for veterinary use.
IPR Medical also buys, sells, repairs, and stocks parts for the Triumph SP12. Call 855-477-8866 or email cs@iprmed.com.
Also available from IPR Medical:
- PETite™ – Touchscreen veterinary IV pump
- PETite Heat™ – PETite with integrated inline fluid warmer
- SnipPet™ – Non-touchscreen veterinary IV pump
- PETfusion™ – Touchscreen veterinary syringe pump
- InfuPet™ – Non-touchscreen veterinary syringe pump
- View all IPR Medical veterinary pumps →
-
Triumph Veterinary IV Pump IP12
The Triumph IP12 is a veterinary IV infusion pump with a 4.3-inch color touchscreen, and 14 preloaded IV set brands. It covers Rate, Time, Body-Weight, Sequence, and Drug Library modes, mounts to an IV pole or cage.
For practices looking for a veterinary IV pump with broader flow range, more occlusion control levels, and IPR’s direct repair and parts backing, consider the IPR PETite™ or IPR SnipPet™ — designed specifically for veterinary use and supported in-house by IPR Medical.
IPR Medical also buys, sells, repairs, and stocks parts for the Triumph IP12. Call 855-477-8866 or email cs@iprmed.com.
Also available from IPR Medical:
- PETite™ – Touchscreen veterinary IV pump
- PETite Heat™ – PETite with integrated inline fluid warmer
- SnipPet™ – Non-touchscreen veterinary IV pump
- PETfusion™ – Touchscreen veterinary syringe pump
- InfuPet™ – Non-touchscreen veterinary syringe pump
- View all IPR Medical veterinary pumps →
-
Philips IntelliVue MX40 Wearable Patient Monitor | Telemetry
The Philips IntelliVue MX40 is a patient wearable monitor designed to provide continuous ECG monitoring, optional FAST SpO2, and impedance respiration for ambulatory patients throughout a hospital or care unit. Part of Philips’ IntelliVue family, the MX40 transmits real-time data wirelessly to the IntelliVue Information Center iX, enabling clinicians to maintain continuous oversight while patients move freely. Its 2.8″ color touchscreen, disinfectant-resistant housing, and flexible battery configuration make it well-suited for telemetry wards, step-down units, and progressive care environments.
Display
2.8″ color touchscreen, up to 5 screen formatsParameters Monitored
ECG, Heart Rate, SpO2 (optional), Pulse Rate, Impedance Respiration, ST, QTECG Lead System
Standard, EASI, or Hexad — selectable in one deviceBattery / Power
Three AA alkaline batteries or rechargeable lithium-ion battery pack (WLAN model: Li-ion only)Wireless Connectivity
1.4 GHz Smart-hopping (WMTS), 2.4 GHz Smart-hopping, or 802.11 a/b/g WLAN — model dependentInfection Control
Case design withstands high-level disinfectants including periodic sterilizationIPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue MX40. Contact us at 855-477-8866 or cs@iprmed.com.
IPR Medical
0
Cart:
$0.00
No products in the cart.
Shop all products
Shop
