What Is the IBP-AM-EW40 Adapter Cable?

The IBP-AM-EW40 is a compatible aftermarket invasive blood pressure (IBP) adapter cable that connects AAMI 6-pin patient monitors to Edwards-type disposable pressure transducers. At 4.0 meters (approximately 13 ft) in length, this reusable cable provides ample reach in critical care and surgical environments without compromising signal integrity. It is not an OEM product and is not manufactured by or affiliated with any original equipment manufacturer. The cable is designed to deliver a reliable pressure signal path between transducer and monitor, supporting accurate invasive arterial and hemodynamic pressure measurements.

Compatible Monitor Models

The IBP-AM-EW40 is compatible with a wide range of AAMI 6-pin patient monitors and multi-parameter systems. Confirmed compatible platforms include Invivo 3500, 3550, 4500 Plus, Escort 100/200/300, M12, Millennia, and Omnitrak 4000; Spacelabs 90308, 90311, 90331, 90402, 90403, 90470, 90496, 90603A, 91496, Alpha 7, Alpha PC, MOD-CD, PC Express, and Scout TPC 90496; Philips 5microvolt, 78205, and 8805; Mindray/Datascope DPM4, DPM5, PM 9000 Express, and Passport; Welch Allyn 106EL, Encore, PIC, Propaq 102, 104, and 106 Acuity; Medtronic/Physio Control Lifepak 12 and Lifepak 15; Smiths Medical/BCI 9100 and 9200 Advisor Series; Edan iM8 and iM80; Bard Medical H8000; Dixtal DX 2020, DX 2021, and DX 2023; Ivy Biomedical 400 and 700; PaceTech Vitalmax 4000; Mortara/Burdick 3100; Tektronix 400 Series; Vitalert 2000; Zoll X Series and Propaq MD; and Generra 710C. This cable is compatible with all AAMI standard 6-pin monitors as a general class.

Design and Construction

The IBP-AM-EW40 features a TPU (thermoplastic polyurethane) jacket, which provides superior flexibility and durability compared to standard PVC cable construction. The cable measures 4 mm in diameter and is finished in gray. On the monitor side, the cable terminates in a round, keyed male 6-pin AAMI-standard connector. On the transducer side, an Edwards-type connector mates directly with Edwards disposable pressure transducers. The cable is latex-free and non-sterile, packaged individually in a bag. The 4.0-meter length is particularly suited for ICU, OR, and PACU environments where monitor-to-bedside distance demands additional cable reach. The cable meets FDA and CE regulatory requirements and is produced under ISO 13485 quality management standards.

When to Replace Your IBP Adapter Cable

IBP adapter cables should be inspected routinely and replaced when visible jacket damage, fraying, cracking, or connector wear is observed. Signal dropout, intermittent readings, or pressure waveform artifacts that cannot be resolved through transducer zeroing or line troubleshooting are common indicators of cable degradation. Cables subjected to repeated disinfection cycles, mechanical stress from repositioning, or high-traffic clinical environments will wear over time. Proactive replacement during planned maintenance helps prevent unexpected monitoring failures during critical patient care situations. The reusable design of the IBP-AM-EW40 supports multiple use cycles when handled properly, but cables should not be retained indefinitely if physical integrity is in question.

Cross Reference and Interchange Part Numbers

The IBP-AM-EW40 serves as a compatible replacement for part numbers across a wide range of manufacturers and suppliers. Edwards references include 896019021, and Zoll references this cable as 8000-0665. Mindray lists the equivalent as 0010-10-42640, while Datascope references 0010-21-43094. Draeger’s corresponding part number is 2606489 and Viamed’s is 6015178. Additional catalog equivalents include AMC CB-91068E, Argo Biomedical ARIBP-AM-EW40, Cables and Sensors IC-6P-ED0, DEAM 890285-IBP-AM-EW40, Gopher Medical GMIBP-AM-EW40, M&R Medical IC-6P-ED0, MAC BCM-6P-ED, MARS MARS-IBP-000009, Orantech IBP-AM-EW40, Revanix RVBIBPAMEW401, and Unimed BC-6P-ED. These cross references may be used to confirm interchange compatibility when evaluating replacement options. IPR Medical’s part number for this item is IBP-AM-EW40.

Why Source IBP Cables from IPR Medical?

IPR Medical specializes in the procurement, repair, and distribution of patient monitoring accessories and capital equipment. Our team supports biomedical technicians and materials managers with stocked inventory, responsive service, and technical expertise across a broad range of monitoring platforms. Whether you need a single replacement cable or are restocking a facility’s IBP supply, IPR Medical is equipped to assist. We carry compatible aftermarket cables and accessories that meet clinical performance requirements at a fraction of OEM pricing, backed by a knowledgeable support team available by phone and email.

IPR Medical buys, sells, repairs, and stocks parts for patient monitoring equipment including IBP cables and accessories. Contact us at 855-477-8866 or cs@iprmed.com.