-
Medfusion 4000
Original price was: $2,595.00.$1,495.00Current price is: $1,495.00.The Smiths Medical Medfusion 4000 is a wireless syringe infusion pump built for the precision low-volume delivery demanded in neonatal, pediatric, anesthesia, and adult critical care. It accepts syringes from 1 mL to 60 mL with automatic size detection, delivers from 0.01 mL/hr to 1130 mL/hr, and runs PharmGuard® Medication Safety Software with FlowSentry™ rapid occlusion detection for early pressure-based intervention.
**SALE – Sold without accessories. Pump includes a power cord and a 1-year warranty. All accessories, including the pole clamp, are sold separately. Compatibility with existing systems must be confirmed by the buyer. For any information regarding the Drug Library, please contact our team directly.** Offer valid for a Limited Time Only.
Pump Type
Syringe infusion pump, horizontal loadFlow Rate Range
0.01 mL/hr to 1130 mL/hrSyringe Sizes
1 mL to 60 mL, automatic size detectionDrug Library
PharmGuard® dose error reduction, profile-basedConnectivity
Wireless (802.11, 2.4 GHz) and wired EthernetPatient Population
Adult, pediatric, neonatalIPR Medical buys, sells, repairs, and stocks parts for the Medfusion 4000 Syringe Pump. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
Medfusion 3500 — same Medfusion platform with PharmGuard® safety software |
Medfusion 2010i — ambulatory syringe pump, 15 delivery modes |
B. Braun Perfusor Space (Version U) — transport-cleared B. Braun Space System syringe pump -
Curlin 6000 CMS
Original price was: $1,695.00.$1,495.00Current price is: $1,495.00.The Moog Curlin 6000 CMS is a compact, ambulatory infusion pump built for both hospital and home infusion environments. Its patented curvilinear peristaltic design delivers fluid in smaller, more precise increments than standard linear peristaltic pumps — an advantage that matters most when managing sensitive patient populations, short half-life medications, or low-rate infusions. With five therapy modes — Continuous, PCA, TPN, Intermittent, and Variable — the Curlin 6000 handles the full range of clinical infusion scenarios from a single, lightweight device that weighs just 18.1 oz. At ±5% accuracy and a 2 mcL flow resolution, it sets a high bar for ambulatory-class performance.
The pump supports dosing in mL, mg, and mcg, and integrates with Moog’s Protocol Library Safety System (PLSS) to streamline programming and reduce the risk of user error. It is powered by two C-cell alkaline batteries and can also run on AC power or an external rechargeable battery pack for extended use. The Curlin 6000 requires Moog Curlin proprietary non-DEHP, latex-free administration sets — IPR Medical stocks these sets, so customers can source both pump and consumables in one place.
IPR Medical buys, sells, repairs, and stocks parts for the Moog Curlin 6000 CMS. Whether you need a fully serviced unit, a repair on a pump already in your fleet, or replacement administration sets, our team is ready to help. Call 855-477-8866 or email cs@iprmed.com.
-
Alaris BD 8110 Syringe Pump Module
Original price was: $1,895.00.$1,495.00Current price is: $1,495.00.The BD Alaris 8110 Syringe Module is the syringe-pump channel of the modular Alaris System, attaching to the Alaris PC Unit (8000/8015) alongside pump, PCA, SpO₂, and EtCO₂ modules. It delivers low-volume and high-accuracy infusions using standard single-use luer-lock syringes from 1 mL to 60 mL, and pairs precision positive-displacement delivery with Guardrails Suite MX dose-error-reduction software. An optional pressure-sensing disc enables fast start, occlusion back-off, numeric in-line pressure display, and configurable pressure alarm limits — a meaningful advantage for critical low-rate infusions such as vasoactive drips and neonatal therapy.
Pump Type
Positive-displacement syringe module (Alaris System)Flow Rate Range
0.01 – 999 ml/hr (range varies by syringe size)Patient Types
Adult, pediatric, neonatalDrug Library
Guardrails Suite MX dose-error-reduction softwareSyringe Brand and Size Compatibility
Brand
1 mL
3 mL
5 mL
6 mL
10 mL
12 mL
20 mL
30 mL
35 mL
50 mL
60 mLBD Plastipak
✓
✓
✓
—
✓
—
✓
✓
—
✓
✓Monoject
—
✓
—
✓
—
✓
✓
—
✓
—
✓Terumo
—
✓
✓
—
✓
—
✓
✓
—
—
✓See the Description Tab for more information.
IPR Medical buys, sells, repairs, and stocks parts for the BD Alaris 8110 Syringe Module. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
BD Alaris 8015 PC Unit (5.7″ Display) — Alaris System point-of-care controller |
Alaris 8100 Pump Module — large-volume pump module |
Alaris 8120 PCA Module — patient-controlled analgesia module -
Philips Avalon Ultrasound Fetal Transducer
$1,475.00The Philips Avalon Ultrasound Fetal Transducer is a state-of-the-art device designed to deliver precise and continuous monitoring of fetal heart rate and activity. This advanced transducer leverages cutting-edge ultrasound technology to ensure accurate and reliable data, which is crucial for making informed clinical decisions during labor and delivery. Its ergonomic design and lightweight construction ensure patient comfort and ease of use for healthcare providers. The Philips Avalon Ultrasound Fetal Transducer integrates seamlessly with existing Philips fetal monitoring systems, providing a cohesive and efficient workflow in maternity wards. The device features a durable, high-quality build, ensuring consistent performance even in the most demanding clinical settings. Real-time, clear displays and alerts keep healthcare providers informed of any changes in fetal status, allowing for timely interventions. The transducer’s intuitive interface simplifies setup and operation, reducing training time and enhancing overall efficiency. Invest in the Philips Avalon Ultrasound Fetal Transducer for unparalleled accuracy, reliability, and comfort in fetal monitoring.
Brand new units may be available. Please contact us directly for more information.
-
Philips IntelliVue M3001A Multi-Measurement Module | Option A03C18, 12-Lead ECG, Masimo SET SpO2, IBP & Temp
Original price was: $1,595.00.$1,395.00Current price is: $1,395.00.The Philips IntelliVue M3001A (Option A03C18) is the fully loaded single-module configuration of the IntelliVue Multi-Measurement Module for facilities standardized on Masimo LNCS sensors. The C18 option combines both extended measurement packages into one: the 12-lead ECG capability of the C12 option and the invasive pressure/temperature channel of the C06 option. The result is a module that delivers 3-, 5-, and 12-lead ECG with arrhythmia and ST monitoring, EASI-derived ECG using 5 electrodes, QT/QTc monitoring, respiration, Masimo SET SpO2, oscillometric NBP, and either invasive blood pressure or temperature — the broadest parameter set available in a single M3001A configuration with Masimo LNCS sensor compatibility. The A03C18 is the direct Masimo SET equivalent of the A01C18 and A02C18: clinically identical in every measurement capability, with Masimo LNCS sensors connecting via the Masimo LNC MP-10 dual-key patient cable (part 2281). As with all M3001A C18 configurations, invasive pressure and temperature share a single connector and cannot be used simultaneously without an MMS extension.
Part Number / Option
M3001A, Option A03C18Parameters Monitored
ECG (3/5/12-lead), EASI ECG, Arrhythmia, ST (up to 12-lead), QT/QTc, Respiration, Masimo SET SpO2, NBP (oscillometric), Invasive Pressure OR Temperature (shared port — not simultaneous)SpO2 Technology
Masimo SET — requires Masimo LNC MP-10 dual-key patient cable (part 2281) for LNCS sensor connection12-Lead ECG
Yes — conventional 12-lead capture with diagnostic signal quality (ANSI/AAMI EC11); EASI 12-lead using 5 electrodes also supportedIBP / Temp Port
One combined connector — supports invasive pressure transducer OR temperature probe; cannot be used simultaneously on this portHost Monitor Compatibility
IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)Data Storage
Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnectedIPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.
-
Philips IntelliVue M3001A Multi-Measurement Module | Option A03C12, 12-Lead ECG & Masimo SET SpO2
Original price was: $1,595.00.$1,395.00Current price is: $1,395.00.The Philips IntelliVue M3001A (Option A03C12) is the 12-lead ECG configuration of the IntelliVue Multi-Measurement Module for facilities standardized on Masimo LNCS sensors. Building on the A03 standard package — ECG, arrhythmia, ST, respiration, Masimo SET SpO2, and oscillometric NBP — the C12 option adds conventional 12-lead ECG capture and EASI-derived 12-lead ECG using only 5 electrodes. The A03C12 is the Masimo SET equivalent of the A01C12 and A02C12: clinically identical in 12-lead ECG capability and overall parameter set, with the SpO2 interface built around a dedicated Masimo SET circuit, and Masimo LNCS sensors connecting via the Masimo LNC MP-10 dual-key patient cable (part 2281). It is the correct choice for facilities that require documented, diagnostic-quality 12-lead ECG recordings alongside continuous monitoring and are standardized on Masimo LNCS sensors, but do not need invasive pressure or temperature within the MMS module itself.
Part Number / Option
M3001A, Option A03C12Parameters Monitored
ECG (3/5/12-lead), EASI ECG, Arrhythmia, ST (up to 12-lead), QT/QTc, Respiration, Masimo SET SpO2, NBP (oscillometric)SpO2 Technology
Masimo SET — requires Masimo LNC MP-10 dual-key patient cable (part 2281) for LNCS sensor connection12-Lead ECG
Yes — conventional 12-lead capture with diagnostic signal quality (ANSI/AAMI EC11); EASI 12-lead using 5 electrodes also supportedInvasive Pressure / Temperature
Not included in Option A03C12 — available with Option A03C18Host Monitor Compatibility
IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)Data Storage
Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnectedIPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.
-
Philips IntelliVue M3001A Multi-Measurement Module | Option A03C06, Masimo SET SpO2, IBP & Temp
Original price was: $1,595.00.$1,395.00Current price is: $1,395.00.The Philips IntelliVue M3001A (Option A03C06) is the extended-measurement configuration of the IntelliVue Multi-Measurement Module for facilities standardized on Masimo LNCS sensors. Building on the A03 standard package — ECG, arrhythmia, ST, respiration, Masimo SET SpO2, and oscillometric NBP — the C06 option adds a combined invasive pressure and temperature connector, enabling the module to support either invasive blood pressure monitoring or temperature measurement in addition to the full core parameter set. The A03C06 is the Masimo SET equivalent of the A01C06 and A02C06, delivering an identical clinical measurement footprint while using a dedicated Masimo SET SpO2 interface and requiring the Masimo LNC MP-10 dual-key patient cable for sensor connection. This configuration is widely deployed in ICU, cardiovascular step-down, post-anesthesia care, and critical care transport environments where arterial line monitoring or core temperature tracking is standard practice alongside a Masimo LNCS sensor fleet. As with all M3001A variants, patient demographics, trend data, and measurement settings are stored in the module itself and travel with the patient between IntelliVue host monitors.
Part Number / Option
M3001A, Option A03C06Parameters Monitored
ECG (3/5-lead), Arrhythmia, ST, Respiration, Masimo SET SpO2, NBP (oscillometric), Invasive Pressure OR Temperature (shared port — not simultaneous)SpO2 Technology
Masimo SET — requires Masimo LNC MP-10 dual-key patient cable (part 2281) for LNCS sensor connectionIBP / Temp Port
One combined connector — supports invasive pressure transducer OR temperature probe; pressure and temperature cannot be used simultaneously on this portHost Monitor Compatibility
IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)Data Storage
Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnectedIPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.
-
Philips Compatible Wireless Toco Transducer for Philips Avalon | M2725A
$1,395.00This is an aftermarket-compatible cordless Toco transducer designed to function as a direct replacement for the M2725A wireless Toco fetal transducer used with the Philips Avalon family of fetal/maternal monitors (FM20, FM30, FM40, FM50) when paired with the Avalon CTS cordless transducer base station (M2720A). It uses a strain-gauge pressure sensor to detect uterine activity by evaluating the hardness of the maternal abdomen during labor, transmitting the signal wirelessly to the CTS base so the patient retains freedom of movement during antepartum testing and labor and delivery. This is a compatible aftermarket part — not a Philips-manufactured product — sold and supported by IPR Medical.
Device Type
Aftermarket-compatible cordless (wireless) external Toco transducer for fetal/maternal monitoringReplaces / Cross Reference
M2725A cordless Toco transducer (also referenced as part 862488)Compatible Monitors
Philips Avalon FM20 (M2702A), FM30 (M2703A), FM40 (M2704A), FM50 (M2705A) — used together with the Avalon CTS base station (M2720A)Patient Population
Antepartum testing and labor and delivery; ambulatory patients within the CTS base station’s coverage areaKey Features
Cordless operation, lightweight handheld form factor, waterproof housing for shower/bath use during labor, on-board status indicatorsMounting
Snap-clip belt fixing onto compatible reusable or waterproof fetal monitoring beltsIPR Medical buys, sells, repairs, and stocks parts for the Philips Avalon Cordless Transducer System (CTS), including aftermarket-compatible wireless Toco transducers for the M2725A. Contact us at 855-477-8866 or cs@iprmed.com.
-
Philips M2734A / M2734B Smart Toco MP Transducer | Avalon
$1,395.00The Philips M2734A and M2734B are wired Smart Toco MP transducers used with the Philips Avalon family of fetal/maternal monitors (FM20, FM30, FM40, FM50). They combine two parameters in a single sensor — external uterine activity (Toco) and maternal pulse (MP) — and enable the Avalon platform’s Smart Pulse automated coincidence detection, which cross-checks the maternal pulse against the fetal heart rate to confirm the host monitor is not inadvertently tracking maternal heart rate as fetal. The M2734B is the successor revision to the M2734A and is functionally interchangeable on the Avalon Toco socket; both are auto-identifying via the Smart-interface (pink) connector and carry internal calibration data storage.
Device Type
Wired dual-parameter Smart Toco MP transducer (uterine activity + maternal pulse)Models
M2734A (original Smart Toco MP) and M2734B (successor revision); both share the same role and Avalon socketCompatible Monitors
Philips Avalon FM20 (M2702A), FM30 (M2703A), FM40 (M2704A), FM50 (M2705A) at supported software revisionsConnector
Wired Smart-interface (pink) connector to the dedicated Toco socket on the Avalon host monitorKey Features
Dual-parameter Toco + maternal pulse, Smart Pulse coincidence detection, waterproof housing for shower/bath use, latex-free, auto-identification, internal calibration data storagePatient Population
Antepartum testing and labor and deliveryIPR Medical buys, sells, repairs, and stocks parts for the Philips Avalon fetal monitor family, including the M2734A and M2734B Smart Toco MP transducers. Contact us at 855-477-8866 or cs@iprmed.com.
-
Baxter Auto Syringe AS50 Infusion Pump
Original price was: $1,995.00.$1,395.00Current price is: $1,395.00.The Baxter Auto Syringe AS50 is a compact, single-channel syringe infusion pump designed for accurate continuous or intermittent delivery of intravenous solutions, drug solutions, whole blood, and packed red blood cells. It supports IV, intra-arterial, epidural, and subcutaneous routes, accepts standard disposable syringes from 1 mL to 60 mL across three manufacturers, and operates on internal rechargeable battery or AC charger for bedside, transport, and ambulatory use.
Pump Type
Single-channel syringe infusion pumpFlow Rate Range
0.01 to 438 mL/hr (syringe-dependent)Compatible Syringes
B-D Plastic, Sherwood Monoject, and Terumo, 1–60 mLDrug Library
Configurable Protocol Library; 18 infusion modesConnectivity
DB-9 RS-232 serial port (remote monitoring/control)Battery
Internal rechargeable pack; 5 hr at 100 mL/hr or 12 hr at 2 mL/hrNotable Features
Bolus, titration, syringe recognition, keypad lock, backlightIPR Medical buys, sells, repairs, and stocks parts for the Baxter Auto Syringe AS50 Infusion Pump. Contact us at 855-477-8866 or cs@iprmed.com.
-
Alaris MedSystem III Infusion Pump | 3-Channel, Multi-Therapy
Price range: $995.00 through $1,395.00The Alaris MedSystem III is a compact three-channel multi-therapy infusion pump used across hospital, transport, and home-care settings for adult, pediatric, and neonatal patients. It delivers IV, intra-arterial, subcutaneous, and epidural therapies through dedicated cassette-based administration sets with anti-free-flow protection, and combines three independent fluid delivery channels in roughly the footprint of a single pump. Six configurable Device Types (General Purpose, Neonatal, Controller Pressure, Operating Room, General Purpose II, Operating Room II) let biomed and clinical teams tune rate, pressure, volume, and air-in-line thresholds to the care area.
Pump Type
Three-channel cassette-based volumetric pumpFlow Rate Range
0.1 – 999 ml/hr per channelPatient Population
Adult, pediatric, neonatalDrug Library
Configurable Drug List Editor with Dose Rate Calculator (DRC)Battery
Rechargeable NiCd; minimum 6 hours at 125 ml/hr on all channelsNotable Features
Rotating pole clamp, secondary delivery per channel, ~5.1 lbs with clampIPR Medical buys, sells, repairs, and stocks parts for the Alaris MedSystem III. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
BD Alaris 8015 PC Unit (5.7″ Display) — successor modular Alaris System point-of-care controller |
Alaris 8100 Pump Module — large-volume pump module for the Alaris System |
Baxter Flo-Gard 6301 — dual-channel volumetric infusion pump -
Philips IntelliVue X2 Multi-Measurement Module
$1,295.00The Philips IntelliVue X2 (M3002A) is a combined Multi-Measurement Module and portable transport monitor designed for use across the hospital continuum — from the ICU and OR to intra-hospital transport and intermediate care. In standalone mode it operates on a rechargeable battery and monitors ECG, arrhythmia, ST, respiration, SpO2, NBP, and optional invasive pressure, temperature, and CO2; when docked to a host IntelliVue monitor it seamlessly hands off all measurements, trends, and patient data as an MMS. The X2’s 3.5-inch touchscreen and configurable SmartKeys give clinicians immediate access to parameters and alarm controls without interrupting patient monitoring.
Display
3.5-inch TFT LCD touchscreen, QVGAParameters Monitored
ECG (3/5/6/10-lead), Arrhythmia, ST, QT/QTc, Respiration, SpO2, NBP, Temp (opt.), IBP (opt.), CO2 (opt.)Patient Population
Adult, Pediatric, NeonatalBattery / Portability
Rechargeable M4607A battery; up to ~3 hrs standalone; up to ~6 hrs with Battery ExtensionDevice Weight
1.98–2.64 lbs (depending on options)Connectivity
Wired LAN, built-in WLAN, Short Range Radio (SRR), MSL connectorHost Monitor Compatibility
IntelliVue MP20/30/40/50/60/70/80/90 (MMS mode)IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue X2. Contact us at 855-477-8866 or cs@iprmed.com.
IPR Medical
0
Cart:
$0.00
No products in the cart.
Shop all products
Shop
