Infusion Pump Repair

Medfusion 2010i

$1,695.00 Original price was: $1,695.00.$1,395.00Current price is: $1,395.00.

The Medfusion 2010i Syringe Pump offers flexibility for a variety of clinical needs, settings and applications. The pump may be utilized whenever meticulous low volume drug or fluid injections using a syringe are required in the hospital.

Category:

Medfusion 2010i

Here are the specifications of Medfusion 2010i Syringe Pump Repair and Medfusion 2010i service manual. Download medfusion 2010i syringe pump manual.

Overall Size: 4.5″ W X 3.0″ H X 7.5″ L

Weight: 2.5 pounds

Power: AC Adapter, DC Internal rechargeable batteries

Recharge Time: 16 hours (with pump turned off)

Battery Capacity: At 25° C, a 16 hour charge will operate the pump for at least 10 hours at 5.0 ml/hr using a 60 ml syringe.

Accuracy: ± 3%, excluding syringe variations

Infusion Modes: Continuous, Volume Over Time, Body Weight and Mass modes

Flow Rate: 0.01 to 378.0 ml/hr dependent upon syringe size selected

Bolus Delivery: Modes that allow bolus are Body Weight, Mass and Continuous

Syringe Selection:

    • Becton-Dickinson (B-D)® 1, 3, 5, 10, 20, 30, 60 ml
    • Monoject® (Mono) 1, 3, 6, 12, 20, 35, 60 ml
    • Terumo® (Teru) 1, 3, 5, 10, 20, 30, 60 ml
    • Becton-Dickinson Glass (BD-G) 1, 3, 5, 10 ml
    • Abbott (Abot) 50 ml (Abboject)
    • *Automatically senses syringe size (except for B-D 1 cc Luer-lock syringe)

Syringe Fill Volume: All syringe sizes will fill to maximum stated volumes

Total Volume Delivered:

    • 0000 to 9999.9999 MG
    • 00 to 9999.99 ml
    • 0000 to 9999.9999 U
Alarms/Alerts

Alarms/Alerts:
– Near Empty (5 to 60 minutes)
– Empty
– Dose Volume Delivered
– Bolus Complete
– Bolus Delivery
– Occlusion
– System Malfunction
– Low Battery
– Depleted Battery
– Syringe Pops Out
– Invalid Size
– Invalid Number
– Check Clutch
– Alarm Temporary Delay: 2 or 60 minutes
– Alarm Audio Volume: Soft or Loud
– Load Syringe Plunger

Status Alerts (Visual, non-audible):
– Stop/Program
– Deliver
– Battery in Use, Charging and Depleted
– Priming
– Standby Mode
– Back Light

description :

The Medfusion 2010i Syringe Pump offers flexibility for a variety of clinical needs, settings and applications. The pump may be utilized whenever meticulous low volume drug or fluid injections using a syringe are required in the hospital. All medications should be delivered in accordance with their approved drug labeling. The pumps may be field customized for specific applications. A choice of 15 modes of delivery are available. In addition, the pump has the capability to store up to 64 user regimens/protocols.

Features
  • Ambulatory syringe pumps that run on either AC current or rechargeable internal batteries.
  • Four infusion modes: Body Weight, Mass, Continuous and Volume over Time
  • Automatically senses syringe size
  • A bolus may be programmed then changed or administered at any time prior to or during drug delivery
  • May be field customized for specific applications
  • Ability to store up to 64 user regimens/protocols

Related Keyphrase:

  • medfusion 2010i service manual
  • medfusion 2010i syringe pump manual
Product Condition