What Is the YSI 401 Compatible Straight-Connector Adult Temperature Probe?

The IPR Medical TS-Y400S-AG30 is a compatible aftermarket (not OEM) adult general (oral/rectal) temperature probe that replaces the YSI 401. This version is specified with a straight connector, and it has a 0.16 in (4.0 mm) probe tip, a 9.8 ft (3.0 m) cable, and 400 Series temperature technology. It is a reusable probe intended for repeated patient use.

Compatible Monitor Models

Compatibility for this straight-connector probe centers on a short list of monitors. It is listed for the Edan Elite V5, iM3, iM8, iM50, iM60, iM70, and iM80, and for the GE Healthcare B40. Because the list is this short, a quick look at the compatibility table on the Specifications tab will tell you whether your monitor is covered.

Design and Construction

Specified with a straight connector, the TS-Y400S-AG30 combines an adult 0.16 in (4.0 mm) tip for general oral or rectal measurement with 9.8 ft (3.0 m) of cable and 400 Series temperature technology. It ships one to a bag, and between patients it should be cleaned and disinfected according to facility protocol, with the tip, cable, and connector checked each time it goes back into use.

When to Replace Your Straight-Connector Adult Temperature Probe

Readings that fluctuate, rise slowly, or differ from a reference thermometer are the most common signs that this probe has reached the end of its service life. Physical checks should cover the cable jacket for splits, the tip for looseness, and the connector for a poor or intermittent fit. Plugging a second, known-good probe into the same monitor quickly rules the monitor in or out.

Cross Reference and Interchange Part Numbers

This probe replaces the YSI 401 and also matches OEM numbers such as Draeger 2606221 and 2601198, GE Healthcare M1024247 and 2107176-031, Mindray 0011-30-90440, and Edan MS0-18927. Every other number on file for this probe, including a Bionet reference, is in the cross-reference table on the Specifications tab.

Why Source Straight-Connector Temperature Probes from IPR Medical?

This listing covers the straight-connector version of the YSI 401 compatible probe. When monitoring equipment needs repair, IPR Medical technicians handle it in-house; we also buy, sell, and stock parts for monitors and infusion pumps as an ISO 9001:2015-certified independent service organization. Visit our temperature probes and cables page or call 855-477-8866 with questions or to place an order.

IPR Medical buys, sells, repairs, and stocks parts for straight-connector temperature probes and the monitors they serve. Contact us at 855-477-8866 or cs@iprmed.com.

Trademark Notice: This is a compatible aftermarket product. It is not manufactured, sold, licensed, or endorsed by YSI, Philips, or any other manufacturer or supplier named on this page. YSI, Philips, and all other brand names, model names, and part numbers shown are trademarks of their respective owners and are used on this page only to identify the equipment this product is compatible with and the OEM parts it can replace, consistent with nominative fair use. IPR Medical is an ISO 9001:2015-certified independent service organization; references to OEM equipment describe the equipment we sell, service, and support, and do not indicate any affiliation with, sponsorship by, or endorsement from its manufacturer.