-
Hospira Plum A+ 3 with Mednet
Original price was: $1,295.00.$995.00Current price is: $995.00.The Plum A ®3 infusion system is designed to meet the growing demand for hospital wide device standardization, and serves a wide range of general floor and critical care needs. The infusion system consists of three component infusers, designated line 1, line 2, and line 3. By incorporating three lines into one unit, the Plum A 3 provides three primary lines, three secondary lines, and piggyback fluid delivery capabilities. Compatibility with the LifeCare® 5000 PlumSet® administration sets and accessories makes the Plum A 3 a convenient and cost-effective infusion system.
Features
- Dose calculation
- Loading dose
- Multi-step programming
- Drug list
- Nurse call back
- Delayed start setting
- Air trap
- Air removal/backpriming
- Air detection (proximal and distal)
- Serial communication
- Variable rate cap
- Alarm history
- Nurse call relay connector
- Volumes infused (A, B, total volumes)
- Variable distal pressure settings
- Non-pulsatile volumetric accuracy
- Microprocessor control
- Large LCD
- Panel back illumination on mains power
- Lockout switch
- Standard fulfill, partfill, syringe, and vial use
- Enteral and parenteral fluid delivery
- Blood and blood product delivery
- Wide range of standard and specialty administration sets
- Password protected keypad lock
-
Hospira Plum A+ with Mednet
Original price was: $995.00.$495.00Current price is: $495.00.The Hospira Plum A+ with MedNet is a dual-line, single-channel, cassette-based volumetric infusion system equipped with Hospira MedNet safety software — transforming the proven Plum A+ hardware into a networked, smart-pump medication management platform. MedNet adds a Custom Drug Library with facility-defined hard and soft dosing limits organized by clinical care area, auto-programming capability that receives physician orders directly at the pump, networked drug library updates that push library changes to the entire fleet from a central server. The result is a complete closed-loop medication safety system on a platform with over 325,000 installations worldwide.
The underlying hardware delivers flow rates from 0.1 to 999 ml/h with ±5% accuracy (1–999 ml/h) across 15 dose-calculation delivery units. Hospira’s PlumSet cassette technology provides integrated free-flow protection, a closed air management system that captures up to 2 ml of air and removes it via automated back-priming without disconnecting the patient line, and variable distal occlusion pressure (1–15 psig). Primary, secondary (piggyback), and concurrent delivery through a single output line allow two medications to run simultaneously. The Plum A+ with MedNet supports parenteral, enteral, and epidural infusion across neonatal, pediatric, and adult patient populations in medical/surgical, critical care, OR, emergency, and alternate-site environments.
IPR Medical buys, sells, repairs, and stocks parts for the Hospira Plum A+ with MedNet. Whether you need a recertified pump, a replacement battery, MedNet module support, or a full repair and recertification, contact us at 855-477-8866 or cs@iprmed.com.
-
Hospira Plum A+ 3
Original price was: $1,295.00.$995.00Current price is: $995.00.The Plum A ®3 infusion system is designed to meet the growing demand for hospital wide device standardization, and serves a wide range of general floor and critical care needs. The infusion system consists of three component infusers, designated line 1, line 2, and line 3. By incorporating three lines into one unit, the Plum A 3 provides three primary lines, three secondary lines, and piggyback fluid delivery capabilities. Compatibility with the LifeCare® 5000 PlumSet® administration sets and accessories makes the Plum A 3 a convenient and cost-effective infusion system.
-
Eitan Medical/ Q Core Sapphire Epidural
The Eitan Medical Sapphire Epidural pump is a dedicated epidural infusion pump built on the proven Sapphire platform. Purpose-built for epidural applications, it features yellow-colored tubing, a yellow faceplate, and on-screen yellow labeling — the internationally recognized color coding for epidural lines — to reduce the risk of misconnection at the point of care.
The Sapphire Epidural delivers three specialized modes: PCEA (patient-controlled epidural analgesia) with optional basal rate and loading dose, Intermittent Epidural with scheduled doses and optional basal rate, and PIEB (programmed intermittent epidural bolus), which combines intermittent scheduled doses with PCEA while giving priority to the intermittent dose to ensure delivery and prevent dose stacking. Flow rates are limited to safe epidural ranges, with a continuous rate of 0–25 mL/h and bolus rates at selectable levels. At 418 g without battery and running approximately 24 hours on a single charge, it is compact enough for labor and delivery, OR, and ambulatory pain management settings.
IPR Medical is one of the few authorized Level 2 Eitan Medical service centers in the United States. We perform manufacturer-authorized repairs, preventive maintenance, and warranty service on all Sapphire pumps — keeping your fleet compliant and calibrated without shipping units back to the manufacturer.
-
Eitan Medical/ Q Core Sapphire Multi-Therapy
The Eitan Medical Sapphire Multi-Therapy is a complete infusion system for varied clinical uses in hospital, ambulatory, and EMS settings. Combining high-end volumetric infusion pump functionality with compact size and low weight, it is designed for PCA, TPN, Continuous, Piggyback, Intermittent, and Epidural treatments — all on a single platform with one standard interface.
Built on Eitan Medical’s patented Flow Control Technology with an intuitive touchscreen and robust hardware, the Sapphire delivers medication infusion confidence across the full continuum of care — from hospitals and infusion centers to homecare and pre-hospital medical transport. It is approved for both air and ground medical transportation, weighs just 418 g without battery, and runs approximately 24 hours on a single charge.
IPR Medical is one of the few authorized Level 2 Eitan Medical service centers in the United States. We perform manufacturer-authorized repairs, preventive maintenance, and warranty service on all Sapphire pumps — keeping your fleet compliant and calibrated without sending units back to the manufacturer.
-
Hospira Plum A+
Original price was: $795.00.$495.00Current price is: $495.00.The Hospira Plum A+ is a dual-line, single-channel, cassette-based volumetric infusion system designed for hospital-wide, alternate-site, and home healthcare standardization. Built for parenteral, enteral, and epidural infusion across neonatal, pediatric, and adult patients, the Plum A+ supports primary, secondary (piggyback), and concurrent delivery through a single output line — allowing two medications to run simultaneously without requiring a second IV site. Flow rates range from 0.1 to 999 ml/h with ±5% accuracy (1–999 ml/h) and 15 dose-calculation delivery units, making it suitable for everything from low-rate critical care drips to high-volume fluid replacement.
The Plum A+ features Hospira’s PlumSet cassette technology with integrated free-flow protection, a closed air management system that captures up to 2 ml of air and removes it via automated back-priming without disconnecting the patient line, variable distal occlusion pressure (1–15 psig, user-selectable), and proximal occlusion detection. At 9.5 lbs with an internal rechargeable sealed lead-acid battery providing approximately 6 hours at 125 ml/h, the Plum A+ is fully compatible with the LifeCare Plum Series administration sets and LifeShield/CLAVE needleless protection systems.
IPR Medical buys, sells, repairs, and stocks parts for the Hospira Plum A+. Whether you need a recertified pump, a replacement battery, cassette door, or pole clamp, or a full repair and recertification, contact us at 855-477-8866 or cs@iprmed.com.
-
ICU Medical/ Hospira Plum 360
Original price was: $1,995.00.$1,150.00Current price is: $1,150.00.The ICU Medical (Hospira) Plum 360 is a cassette-based, dual-line volumetric infusion system and the next-generation successor to the widely installed Plum A+ platform. It delivers two infusions through a single patient line — primary and secondary (piggyback) or concurrent — with a secondary line that connects directly to the PlumSet cassette so the pump can distinguish between the two and alert staff if the secondary line stops infusing. Flow rates range from 0.1 to 999 ml/h at ±5% accuracy with 15 dose-calculation units, and a 2,500-medication drug library with hard and soft limits across 40 clinical care areas provides comprehensive safety guardrails.
What makes the Plum 360 stand out is its closed air management system — an industry-exclusive 1 ml air trap reduces nuisance air-in-line alarms, and automated back-priming clears air without disconnecting the patient line. Full IV-EHR interoperability, 802.11 a/b/g/n wireless and Ethernet connectivity, alarm forwarding, auto-programming from physician orders, and UL-certified cybersecurity make it a modern, network-ready smart pump. The Plum 360 operates standalone or with ICU Medical MedNet safety software and is compatible with the full line of Plum Series administration sets and CLAVE needleless systems.
IPR Medical buys, sells, repairs, and stocks parts for the Plum 360. We also supply PlumSet cassettes, IV administration sets, and other consumables. Contact us at 855-477-8866 or cs@iprmed.com.
-
CME BodyGuard 323
$1,095.00The CME BodyGuard 323 is a compact, versatile infusion pump designed for both hospital and ambulatory settings. It offers precise and reliable delivery of medication with adjustable infusion rates, ensuring accurate dosing for patients. The pump’s user-friendly interface allows for easy programming and operation by healthcare providers. Its lightweight and portable design make it convenient for patients to carry, enhancing mobility and comfort. The BodyGuard 323 includes safety features such as occlusion detection and air-in-line sensors to ensure patient safety during use. It supports various infusion modes, catering to a wide range of medical needs. The device is also equipped with an LCD screen for clear monitoring of infusion status. Overall, the CME BodyGuard 323 is a dependable and flexible solution for effective infusion therapy in diverse healthcare environments.
-
Hospira Gemstar Blue
The GemStar Pump is a small and lightweight, single-channel infusion device designed for use in the home, in the hospital, or anywhere electronic infusion is required. The GemStar Pump can be powered by AC mains adaptor, rechargeable battery pack, docking station, or two disposable AA alkaline or lithium batteries. When powered by batteries, the GemStar Pump is ideal for ambulatory patients.
Hospira Gemstar Blue Offers 7 Therapy Features:
- Pain Management
- TPN
- Continuous
- Variable Time
- Weight Dosed
- Intermittent
- mL/hr Only
-
CME BodyGuard 121 Twins
Original price was: $2,495.00.$2,295.00Current price is: $2,295.00.The BodyGuard 121 Twins™ dual-channel infusion pump from CME allows you to manage two regimens for your patient, whether at the bedside or on the go. Competitively priced compared to larger devices, this pump offers the flexibility to deliver antibiotics, chemotherapy, TPN, and PCA infusions. Its lightweight and easy-to-use design ensures convenient setup wherever patient care is needed. The dual channels enable simultaneous administration of different therapies, enhancing treatment efficiency. The compact size supports patient mobility, making it ideal for various healthcare settings. The intuitive interface simplifies operation for healthcare providers. Overall, the BodyGuard 121 Twins™ is a versatile, cost-effective solution for comprehensive infusion therapy. -
Alaris MedSystem III Infusion Pump | 3-Channel, Multi-Therapy
Price range: $995.00 through $1,395.00The Alaris MedSystem III is a compact three-channel multi-therapy infusion pump used across hospital, transport, and home-care settings for adult, pediatric, and neonatal patients. It delivers IV, intra-arterial, subcutaneous, and epidural therapies through dedicated cassette-based administration sets with anti-free-flow protection, and combines three independent fluid delivery channels in roughly the footprint of a single pump. Six configurable Device Types (General Purpose, Neonatal, Controller Pressure, Operating Room, General Purpose II, Operating Room II) let biomed and clinical teams tune rate, pressure, volume, and air-in-line thresholds to the care area.
Pump Type
Three-channel cassette-based volumetric pumpFlow Rate Range
0.1 – 999 ml/hr per channelPatient Population
Adult, pediatric, neonatalDrug Library
Configurable Drug List Editor with Dose Rate Calculator (DRC)Battery
Rechargeable NiCd; minimum 6 hours at 125 ml/hr on all channelsNotable Features
Rotating pole clamp, secondary delivery per channel, ~5.1 lbs with clampIPR Medical buys, sells, repairs, and stocks parts for the Alaris MedSystem III. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
BD Alaris 8015 PC Unit (5.7″ Display) — successor modular Alaris System point-of-care controller |
Alaris 8100 Pump Module — large-volume pump module for the Alaris System |
Baxter Flo-Gard 6301 — dual-channel volumetric infusion pump -
Alaris 8100 Pump Module
Original price was: $895.00.$495.00Current price is: $495.00.The BD Alaris™ 8100 Pump Module is the large-volume infusion channel of the widely deployed Alaris System — a modular, point-of-care infusion platform that has been a cornerstone of IV medication safety programs in hospitals across the United States for over two decades. Designed to attach to the Alaris PC Unit (PCU, Model 8015), the 8100 operates as one channel in a system that can accommodate up to four pump modules on a single PCU, enabling clinicians to manage multiple independent infusions from a unified interface. Each channel delivers fluids, medications, blood, and blood products to adult, pediatric, or neonatal patients across intravenous, intra-arterial, subcutaneous, epidural, enteral, and irrigation routes.
The 8100 delivers from 0.1 to 999 ml/h with ±5% accuracy (±5.5% at rates below 1 ml/h), supports secondary (piggyback) infusion mode, drug calculation, multi-dose programming, dynamic downstream pressure display, and configurable occlusion pressure thresholds. Its color-coded LED status indicators — red for alarm, yellow for pause, green for infusing — let nurses assess the state of every channel at a glance without approaching the bedside. At 2.5 lbs and measuring 3.3″ × 8.9″ × 5.5″, the module attaches to either side of the PCU in under a minute and can be hot-swapped while other channels continue infusing.
IPR Medical buys, sells, repairs, and stocks parts for the BD Alaris 8100 Pump Module. Whether you need to expand an existing Alaris fleet, replace failed modules, or establish a service contract for preventive maintenance, our team can help. Contact us at 855-477-8866 or cs@iprmed.com.
IPR Medical
0
Cart:
$0.00
No products in the cart.
Shop all products
Shop
