-
Compatible GE Corometrics TOCO Fetal Transducer, Knob, 2264HAX
Original price was: $375.00.$325.00Current price is: $325.00.Reliable fetal monitoring starts with the right transducer. This compatible toco (tocodynamometer) transducer is a direct replacement for the GE Corometrics 2264HAX, providing accurate external monitoring of uterine contraction frequency, duration, and relative pressure throughout labor and delivery.
The knob (button) style connector threads securely into the corresponding port on GE Corometrics fetal monitors and locks the transducer in place against the maternal abdomen with a standard monitoring belt. The low-profile, flat design prioritizes patient comfort during extended monitoring sessions, while the watertight construction withstands routine cleaning and disinfection between patients.
This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:
Series
Compatible Models100 Series
116, 118, 120, 128, 129, 130, 145, 150, 151, 155170 Series
170, 171, 172, 173, 174250 Series
250, 250cx, 256cx, 259, 259cx300 Series
340IPR Medical stocks this compatible replacement transducer so your labor and delivery team can keep monitoring without delays. Call us at 855-477-8866 or email cs@iprmed.com.
-
Baxter PCA II
$425.00The Baxter – Bard PCA II Pump is a patient-controlled analgesia device designed to provide safe and effective pain management. It allows patients to self-administer predetermined doses of pain medication, ensuring timely and controlled relief. The pump features a lockout interval to prevent overdose, enhancing patient safety. Its user-friendly interface simplifies programming and monitoring for healthcare providers. Compact and portable, the PCA II Pump is suitable for both hospital and home use. The device includes safety alarms to alert users of potential issues, such as occlusions or low battery. Overall, the Baxter – Bard PCA II Pump is a reliable and efficient solution for managing patient pain. -
Baxter Mini-Infuser 300XL Syringe Pump | Multi-Speed
Original price was: $795.00.$495.00Current price is: $495.00.The Baxter Mini-Infuser 300XL is a battery-powered, multi-speed syringe infusion pump originally developed by Bard Medsystems and later distributed by Baxter Healthcare for controlled, intermittent intravenous medication administration. The 300XL adds a three-position rate selector switch to the same chassis used by the single-rate 150XL, allowing the clinician to choose among three plunger drive speeds and infuse standard 5–60 mL disposable syringes over a wider range of durations without changing syringe sizes. It is well suited to short-duration secondary infusions, IV piggyback delivery, and small-volume drug administration in inpatient, outpatient, and ambulatory care settings.
Pump Type
Multi-speed (multispeed) syringe infusion pumpCompatible Syringes
5 mL to 60 mL disposable syringes (B-D, Monoject)Plunger Drive Rates
XLow 1.8 in/hr, Low 2.7 in/hr, Medium 5.5 in/hr (rate selector switch)Power
Four C-size alkaline cells; ~400 hours typical service lifePortability
1.75 lbs with batteries; pole loop and optional mounting bracketNotable Features
Active time scale, anti-syphon latch, occlusion detection, audible/visual alarmsIPR Medical buys, sells, repairs, and stocks parts for the Baxter Mini-Infuser 300XL. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
Baxter Mini-Infuser 150XL — single-rate sister pump on the same chassis |
Baxter Auto Syringe AS40A — programmable syringe pump for continuous and intermittent infusion -
Alaris 8100 Pump Module
Original price was: $895.00.$495.00Current price is: $495.00.The BD Alaris™ 8100 Pump Module is the large-volume infusion channel of the widely deployed Alaris System — a modular, point-of-care infusion platform that has been a cornerstone of IV medication safety programs in hospitals across the United States for over two decades. Designed to attach to the Alaris PC Unit (PCU, Model 8015), the 8100 operates as one channel in a system that can accommodate up to four pump modules on a single PCU, enabling clinicians to manage multiple independent infusions from a unified interface. Each channel delivers fluids, medications, blood, and blood products to adult, pediatric, or neonatal patients across intravenous, intra-arterial, subcutaneous, epidural, enteral, and irrigation routes.
The 8100 delivers from 0.1 to 999 ml/h with ±5% accuracy (±5.5% at rates below 1 ml/h), supports secondary (piggyback) infusion mode, drug calculation, multi-dose programming, dynamic downstream pressure display, and configurable occlusion pressure thresholds. Its color-coded LED status indicators — red for alarm, yellow for pause, green for infusing — let nurses assess the state of every channel at a glance without approaching the bedside. At 2.5 lbs and measuring 3.3″ × 8.9″ × 5.5″, the module attaches to either side of the PCU in under a minute and can be hot-swapped while other channels continue infusing.
IPR Medical buys, sells, repairs, and stocks parts for the BD Alaris 8100 Pump Module. Whether you need to expand an existing Alaris fleet, replace failed modules, or establish a service contract for preventive maintenance, our team can help. Contact us at 855-477-8866 or cs@iprmed.com.
-
Hospira Plum A+
Original price was: $795.00.$495.00Current price is: $495.00.The Hospira Plum A+ is a dual-line, single-channel, cassette-based volumetric infusion system designed for hospital-wide, alternate-site, and home healthcare standardization. Built for parenteral, enteral, and epidural infusion across neonatal, pediatric, and adult patients, the Plum A+ supports primary, secondary (piggyback), and concurrent delivery through a single output line — allowing two medications to run simultaneously without requiring a second IV site. Flow rates range from 0.1 to 999 ml/h with ±5% accuracy (1–999 ml/h) and 15 dose-calculation delivery units, making it suitable for everything from low-rate critical care drips to high-volume fluid replacement.
The Plum A+ features Hospira’s PlumSet cassette technology with integrated free-flow protection, a closed air management system that captures up to 2 ml of air and removes it via automated back-priming without disconnecting the patient line, variable distal occlusion pressure (1–15 psig, user-selectable), and proximal occlusion detection. At 9.5 lbs with an internal rechargeable sealed lead-acid battery providing approximately 6 hours at 125 ml/h, the Plum A+ is fully compatible with the LifeCare Plum Series administration sets and LifeShield/CLAVE needleless protection systems.
IPR Medical buys, sells, repairs, and stocks parts for the Hospira Plum A+. Whether you need a recertified pump, a replacement battery, cassette door, or pole clamp, or a full repair and recertification, contact us at 855-477-8866 or cs@iprmed.com.
-
Kangaroo Epump
Original price was: $795.00.$495.00Current price is: $495.00.The Kangaroo™ ePump Enteral Feeding Pump (Model 382400) is a trusted, precision rotary peristaltic feeding pump developed by Kendall/Tyco Healthcare and later carried under the Covidien and Cardinal Health brands. Widely deployed across hospitals, long-term care facilities, nursing homes, and home care settings, the ePump has earned a reputation for straightforward programming, reliable accuracy, and attitude-independent operation — meaning it delivers correctly in any orientation without a drip chamber on the set.
The ePump delivers feeding formula at 1–400 ml/h in 1 ml/h increments with ±10% accuracy, and uses the MISTIC (Magnetic Intelligent Set Type Identification Connector) system to automatically recognize whether a Feed-Only or Feed & Flush pump set is loaded and adjust programming accordingly. The built-in rechargeable NiMH battery provides up to 15 hours of backup power, and the 72-hour feeding history log gives clinicians a clear record of delivered volume. The pump weighs just 2.3 lbs without the pole clamp, making it genuinely portable for ambulatory use.
IPR Medical specializes in sourcing, repairing, and supporting end-of-life platforms like the Kangaroo ePump — keeping your existing fleet running when the OEM has moved on. IPR Medical buys, sells, repairs, and stocks parts for the Kangaroo ePump. Contact us at 855-477-8866 or cs@iprmed.com.
-
Kangaroo Joey Feeding Pump
Original price was: $895.00.$495.00Current price is: $495.00.The Kangaroo™ Joey Enteral Feed and Flush Pump (Model 383400) is Covidien’s purpose-built ambulatory enteral feeding pump — the smallest pump in the Kangaroo family and, at the time of its introduction, the first hydrating ambulatory enteral device on the market. Where the Kangaroo ePump was designed primarily for bedside and pole use, the Joey was engineered from the ground up for patients on the move: it fits in the dedicated Kangaroo Joey Backpack, runs for up to 18 hours on a single charge. That combination made it a staple of home tube feeding programs for patients who wanted to continue school, work, and daily activities without being tethered to a pole.
The Joey delivers formula at 1–400 ml/h in 1 ml/h increments with ±7% accuracy and uses the same MISTIC smart-set identification system found on the ePump — automatically recognizing Feed-Only versus Feed & Flush sets and adjusting the programming interface accordingly. The 72-hour history log, programmable flush intervals from 1 to 24 hours, flush volumes from 10 to 500 ml, and Keep Tube Open (KTO) feature all translate directly from the ePump platform into a package that is 30% smaller. At 1.7 lbs without the pole clamp, the Joey is genuinely wearable.
Note for facilities: Cardinal Health discontinued new Kangaroo Joey capital equipment sales in September 2024, with feeding sets and accessories carrying an anticipated end of supply through September 2027. IPR Medical specializes in supporting end-of-life platforms — keeping existing Joey fleets in service through repair, parts, and refurbished units for as long as your patients need them. IPR Medical buys, sells, repairs, and stocks parts for the Kangaroo Joey Enteral Feeding Pump. Contact us at 855-477-8866 or cs@iprmed.com.
-
Enteralite Infinity (Orange)
Original price was: $795.00.$495.00Current price is: $495.00.The Moog Infinity® Orange is the small-volume specialist in Moog Medical’s Infinity enteral feeding pump family — purpose-built for patients who require low-rate, low-volume feedings with a level of precision and safety that standard-volume pumps are not optimized to deliver. Most commonly prescribed for neonates, infants, and young children receiving human milk or formula in NICU, PICU, and home care settings, the Infinity Orange delivers at rates from 0.1 to 300 ml/h with ±5% accuracy and reduces both priming volume (~5.5 ml) and residual volume (~2.0 ml) to a fraction of what standard pumps leave behind — critical factors when every milliliter of human milk or specialized formula has clinical significance.
The Orange is housed in the same compact, orientation-independent shell as the Infinity Blue, sharing identical dimensions (4.05″ H × 5.65″ W × 1.95″ D) and sub-one-pound weight (14.4 oz). It operates in any position, runs up to 24 hours on a single charge. But where the Blue is optimized for a broad range of adult and pediatric patients, the Orange adds two features unique to its small-volume focus: a FOOD TYPE selection that lets clinicians specify formula or human milk so the pump can account for viscosity differences in its delivery, and a lower-speed priming function (~360 ml/h vs. ~700 ml/h for the Blue) that reduces the pressure and volume risk during priming for fragile neonatal patients. Orange-colored delivery set tubing provides an additional visual cue distinguishing enteral from IV lines at the bedside.
IPR Medical buys, sells, repairs, and stocks parts and delivery sets for the Moog Infinity Orange Enteral Feeding Pump. Contact us at 855-477-8866 or cs@iprmed.com.
-
Hospira Plum A+ with Mednet
Original price was: $995.00.$495.00Current price is: $495.00.The Hospira Plum A+ with MedNet is a dual-line, single-channel, cassette-based volumetric infusion system equipped with Hospira MedNet safety software — transforming the proven Plum A+ hardware into a networked, smart-pump medication management platform. MedNet adds a Custom Drug Library with facility-defined hard and soft dosing limits organized by clinical care area, auto-programming capability that receives physician orders directly at the pump, networked drug library updates that push library changes to the entire fleet from a central server. The result is a complete closed-loop medication safety system on a platform with over 325,000 installations worldwide.
The underlying hardware delivers flow rates from 0.1 to 999 ml/h with ±5% accuracy (1–999 ml/h) across 15 dose-calculation delivery units. Hospira’s PlumSet cassette technology provides integrated free-flow protection, a closed air management system that captures up to 2 ml of air and removes it via automated back-priming without disconnecting the patient line, and variable distal occlusion pressure (1–15 psig). Primary, secondary (piggyback), and concurrent delivery through a single output line allow two medications to run simultaneously. The Plum A+ with MedNet supports parenteral, enteral, and epidural infusion across neonatal, pediatric, and adult patient populations in medical/surgical, critical care, OR, emergency, and alternate-site environments.
IPR Medical buys, sells, repairs, and stocks parts for the Hospira Plum A+ with MedNet. Whether you need a recertified pump, a replacement battery, MedNet module support, or a full repair and recertification, contact us at 855-477-8866 or cs@iprmed.com.
-
BD Alaris 8015 PC Unit (4.7″ Display)
Original price was: $550.00.$495.00Current price is: $495.00.The BD Alaris 8015 PC Unit with the 4.7″ display is the original form factor of the Alaris PCU — the same modular command center that became one of the most deployed infusion platforms in North American acute care, just with a smaller screen. Everything that defines the Alaris system is here: up to four attached infusion and monitoring modules (pump, syringe, PCA, SpO2, EtCO2) under a single unified interface, Guardrails Suite MX running up to 30 care area profiles with facility-defined soft and hard dose limits, and wireless connectivity via Alaris Systems Manager for fleet-wide drug library updates and CQI reporting. The 4.7″ display is smaller than the 5.7″ variant but runs the same software, accepts the same modules, and fits the same pole clamp — meaning any facility already running 4.7″ units can add to the fleet without retraining staff or changing workflows.
If your facility needs the larger screen for high-acuity environments where bedside visibility matters, the 5.7″ version is also available from IPR Medical. Also available: BD Alaris 8015 with 5.7″ display But if you’re stocking up on a proven platform at a lower price point, or simply replacing units in an existing 4.7″ fleet, this is a cost-effective way to do it without compromising on capability.
IPR Medical buys, sells, repairs, and stocks parts for the BD Alaris 8015. Call us at 855-477-8866 or email cs@iprmed.com.
-
ICU Medical / Hospira Plum XL Infusion Pump
Original price was: $795.00.$495.00Current price is: $495.00.The ICU Medical / Hospira Plum XL Micro/Macro is a dual-line volumetric infusion pump originally introduced by Abbott Laboratories in 1993 and later marketed by Hospira and ICU Medical. With a single integrated cassette pathway that supports primary, secondary, and piggyback delivery from one device, the Plum XL was widely deployed across med/surg, critical care, alternate-site, and home-care environments before its OEM retirement on June 30, 2015. IPR Medical supports facilities that continue to operate Plum XL fleets with refurbished pumps, recertified components, and field service.
Pump Type
Dual-line volumetric, cassette-basedFlow Rate Range
0.1 to 999 mL/hrDelivery Modes
Primary, Secondary, PiggybackDisplay / Interface
Backlit LCD with rotary control dialBattery
Sealed lead-acid 8 V, ~8 hr at 125 mL/hrNotable Features
Backpriming, anti-free-flow cassette, lockout switch, optional DataPortIPR Medical buys, sells, repairs, and stocks parts for the Hospira Plum XL Infusion Pump. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
Hospira Plum A+ — dual-line successor to the Plum XL |
Hospira Plum A+ with MedNet — Plum A+ with MedNet drug library software |
Hospira Plum A+ 3 — three-channel Plum platform |
ICU Medical Plum 360 — current-generation Plum platform -
Baxter Flo-Gard 6201
Original price was: $895.00.$550.00Current price is: $550.00.The Baxter Flo-Gard 6201 is a single-channel linear peristaltic volumetric infusion pump designed to deliver a wide variety of fluids — including blood and fat emulsions — across a broad range of infusion rates. A significant upgrade over the 6200, the 6201 adds incremental 0.1 mL/hr flow rate precision, a Programmed Delivery Profile (PDP) with up to 10 sequential infusion steps for ramped or manual programming, selectable air-in-line detection sensitivity, selectable downstream occlusion sensitivity, a Flow Check display, volume-time programming, a five-hour infusion data memory, and suitability for epidural administration.
It runs on 110/120V AC or an internal 12-volt sealed lead-acid battery with approximately 6 hours of runtime. Automatic piggybacking, a locking control panel, and an automatic safety clamp that occludes tubing on door open round out a pump that hospitals continue to rely on long after its discontinuation.
The Flo-Gard 6201 is an older, discontinued pump — but its dependability has kept it in active service across healthcare settings for decades. IPR Medical maintains a large inventory of Flo-Gard 6201 parts to keep your fleet running strong, from batteries and fuses to pump mechanisms and power cords.
IPR Medical
0
Cart:
$0.00
No products in the cart.
Shop all products
Shop
