-
Hospira Plum A+ 3 with Mednet
Original price was: $1,295.00.$995.00Current price is: $995.00.The Plum A ®3 infusion system is designed to meet the growing demand for hospital wide device standardization, and serves a wide range of general floor and critical care needs. The infusion system consists of three component infusers, designated line 1, line 2, and line 3. By incorporating three lines into one unit, the Plum A 3 provides three primary lines, three secondary lines, and piggyback fluid delivery capabilities. Compatibility with the LifeCare® 5000 PlumSet® administration sets and accessories makes the Plum A 3 a convenient and cost-effective infusion system.
Features
- Dose calculation
- Loading dose
- Multi-step programming
- Drug list
- Nurse call back
- Delayed start setting
- Air trap
- Air removal/backpriming
- Air detection (proximal and distal)
- Serial communication
- Variable rate cap
- Alarm history
- Nurse call relay connector
- Volumes infused (A, B, total volumes)
- Variable distal pressure settings
- Non-pulsatile volumetric accuracy
- Microprocessor control
- Large LCD
- Panel back illumination on mains power
- Lockout switch
- Standard fulfill, partfill, syringe, and vial use
- Enteral and parenteral fluid delivery
- Blood and blood product delivery
- Wide range of standard and specialty administration sets
- Password protected keypad lock
-
Hospira Plum A+ 3
Original price was: $1,295.00.$995.00Current price is: $995.00.The Plum A ®3 infusion system is designed to meet the growing demand for hospital wide device standardization, and serves a wide range of general floor and critical care needs. The infusion system consists of three component infusers, designated line 1, line 2, and line 3. By incorporating three lines into one unit, the Plum A 3 provides three primary lines, three secondary lines, and piggyback fluid delivery capabilities. Compatibility with the LifeCare® 5000 PlumSet® administration sets and accessories makes the Plum A 3 a convenient and cost-effective infusion system.
-
Hospira Plum A+ with Mednet
Original price was: $995.00.$495.00Current price is: $495.00.The Hospira Plum A+ with MedNet is a dual-line, single-channel, cassette-based volumetric infusion system equipped with Hospira MedNet safety software — transforming the proven Plum A+ hardware into a networked, smart-pump medication management platform. MedNet adds a Custom Drug Library with facility-defined hard and soft dosing limits organized by clinical care area, auto-programming capability that receives physician orders directly at the pump, networked drug library updates that push library changes to the entire fleet from a central server. The result is a complete closed-loop medication safety system on a platform with over 325,000 installations worldwide.
The underlying hardware delivers flow rates from 0.1 to 999 ml/h with ±5% accuracy (1–999 ml/h) across 15 dose-calculation delivery units. Hospira’s PlumSet cassette technology provides integrated free-flow protection, a closed air management system that captures up to 2 ml of air and removes it via automated back-priming without disconnecting the patient line, and variable distal occlusion pressure (1–15 psig). Primary, secondary (piggyback), and concurrent delivery through a single output line allow two medications to run simultaneously. The Plum A+ with MedNet supports parenteral, enteral, and epidural infusion across neonatal, pediatric, and adult patient populations in medical/surgical, critical care, OR, emergency, and alternate-site environments.
IPR Medical buys, sells, repairs, and stocks parts for the Hospira Plum A+ with MedNet. Whether you need a recertified pump, a replacement battery, MedNet module support, or a full repair and recertification, contact us at 855-477-8866 or cs@iprmed.com.
-
Baxter Auto Syringe AS50 Infusion Pump
Original price was: $1,995.00.$1,395.00Current price is: $1,395.00.The Baxter Auto Syringe AS50 is a compact, single-channel syringe infusion pump designed for accurate continuous or intermittent delivery of intravenous solutions, drug solutions, whole blood, and packed red blood cells. It supports IV, intra-arterial, epidural, and subcutaneous routes, accepts standard disposable syringes from 1 mL to 60 mL across three manufacturers, and operates on internal rechargeable battery or AC charger for bedside, transport, and ambulatory use.
Pump Type
Single-channel syringe infusion pumpFlow Rate Range
0.01 to 438 mL/hr (syringe-dependent)Compatible Syringes
B-D Plastic, Sherwood Monoject, and Terumo, 1–60 mLDrug Library
Configurable Protocol Library; 18 infusion modesConnectivity
DB-9 RS-232 serial port (remote monitoring/control)Battery
Internal rechargeable pack; 5 hr at 100 mL/hr or 12 hr at 2 mL/hrNotable Features
Bolus, titration, syringe recognition, keypad lock, backlightIPR Medical buys, sells, repairs, and stocks parts for the Baxter Auto Syringe AS50 Infusion Pump. Contact us at 855-477-8866 or cs@iprmed.com.
-
Medfusion 4000
Original price was: $2,595.00.$1,495.00Current price is: $1,495.00.The Smiths Medical Medfusion 4000 is a wireless syringe infusion pump built for the precision low-volume delivery demanded in neonatal, pediatric, anesthesia, and adult critical care. It accepts syringes from 1 mL to 60 mL with automatic size detection, delivers from 0.01 mL/hr to 1130 mL/hr, and runs PharmGuard® Medication Safety Software with FlowSentry™ rapid occlusion detection for early pressure-based intervention.
**SALE – Sold without accessories. Pump includes a power cord and a 1-year warranty. All accessories, including the pole clamp, are sold separately. Compatibility with existing systems must be confirmed by the buyer. For any information regarding the Drug Library, please contact our team directly.** Offer valid for a Limited Time Only.
Pump Type
Syringe infusion pump, horizontal loadFlow Rate Range
0.01 mL/hr to 1130 mL/hrSyringe Sizes
1 mL to 60 mL, automatic size detectionDrug Library
PharmGuard® dose error reduction, profile-basedConnectivity
Wireless (802.11, 2.4 GHz) and wired EthernetPatient Population
Adult, pediatric, neonatalIPR Medical buys, sells, repairs, and stocks parts for the Medfusion 4000 Syringe Pump. Contact us at 855-477-8866 or cs@iprmed.com.
Also available from IPR Medical:
Medfusion 3500 — same Medfusion platform with PharmGuard® safety software |
Medfusion 2010i — ambulatory syringe pump, 15 delivery modes |
B. Braun Perfusor Space (Version U) — transport-cleared B. Braun Space System syringe pump -
Medfusion 2010i
Original price was: $1,295.00.$1,195.00Current price is: $1,195.00.The Medfusion 2010i is the expanded-capability version of the Medfusion 2010 — an ambulatory syringe pump offering the broadest unit coverage in the 2010-series platform. Where the 2010 covers the most common weight-based and mass dosing units, the 2010i adds 15 available delivery modes across Body Weight, Mass, Continuous, and Volume Over Time categories, with an extended range of unit conversions that gives clinicians greater flexibility across critical care, anesthesia, neonatal, and specialty pharmacy applications.
The 2010i stores up to 64 user regimens and protocols across two protected user banks for fast recall of pre-programmed clinical regimens. Bolus delivery is programmable and can be administered at any time prior to or during drug delivery. It runs on AC power or internal rechargeable battery, accepts B-D, Monoject, and Terumo syringes from 1 mL to 60 mL with automatic syringe size detection, and delivers flow rates from 0.01 to 378.0 mL/hr at ±3% accuracy. Four-position variable occlusion settings and a custom program lockout mode allow the pump to be configured to facility-specific requirements.
The Medfusion 2010i is a discontinued product that remains in active use. Whether you need a patient-ready unit, replacement parts, or a repair on a pump already in your fleet, IPR Medical is here to help. We buy, sell, repair, and stock parts for the Medfusion 2010i — contact us to discuss your needs.
-
Medfusion 2010
Original price was: $1,095.00.$995.00Current price is: $995.00.The Medfusion 2010 is an ambulatory syringe pump designed for precise, low-volume drug and fluid injection in the hospital setting. Building on the foundation of the Medfusion 2001, the 2010 adds body-weight-based dosing capability — making it well suited for critical care, anesthesia, and any clinical application where medication must be dosed relative to patient weight. It supports four infusion mode categories: Body Weight (mcg/kg/min, mcg/kg/hr, mg/kg/min, mg/kg/hr), Mass (mg/hr), Continuous (mL/hr), and Volume Over Time — with bolus delivery available across Body Weight, Mass, and Continuous modes.
Running on AC power or internal rechargeable batteries, the 2010 accepts syringes from B-D, Monoject, and Terumo in sizes from 1 mL to 60 mL with automatic syringe size detection. It delivers flow rates from 0.01 to 378.0 mL/hr at ±3% accuracy, features four-position variable occlusion settings, and supports a custom program mode with lockout for facility-specific configuration. The pump mounts to a treatment cage, IV pole, or benchtop and operates in nearly any position.
The Medfusion 2010 is a discontinued product that remains in active use across hospitals and clinical settings. Whether you need a patient-ready unit, replacement parts, or a repair on a pump already in your fleet, IPR Medical is here to help. We buy, sell, repair, and stock parts for the Medfusion 2010 — contact us to discuss your needs.
-
Smiths Medical Medfusion 2001 Syringe Pump | Auto-Sizing, 4-Mode
Original price was: $895.00.$795.00Current price is: $795.00.The Medfusion 2001 is a compact, microprocessor-controlled syringe infusion pump built for meticulous low-volume drug and fluid delivery in the hospital. It automatically senses syringe size across a broad range of syringe brands, delivers at ±3% accuracy, and offers four infusion modes plus a custom-program lockout for programming security. Originally manufactured by Medex, Inc. under the Medfusion brand (later held by Smiths Medical), the 2001 remains a dependable bedside and transport pump in pediatric, neonatal, and critical-care settings.
Pump Type
Syringe infusion pump, single-channelFlow Rate Range
0.01 to 378.0 ml/hr (syringe-size dependent)Infusion Modes
Continuous, Volume Over Time, Intermittent Auto, Intermittent ManualSyringe Compatibility
Automatic size sensing; 1–60 ml; multiple syringe brandsBattery
Internal rechargeable; ~10 hr at 5.0 ml/hr (60 ml syringe)Occlusion Settings
Four selectable force settings (Low, Normal, Mid, High)IPR Medical buys, sells, repairs, and stocks parts for the Medfusion 2001 Syringe Pump. Contact us at 855-477-8866 or cs@iprmed.com.
-
CADD Solis 2100
The Smiths Medical CADD®-Solis 2100 is a compact, ambulatory infusion pump built for patients who need reliable pain management therapy — in the hospital and at home. Weighing just 1.31 lbs with batteries installed, it delivers continuous, PCA, intermittent bolus, clinician bolus, and Programmed Intermittent Epidural Bolus (PIB) therapy through a single portable platform. Color-coded visual alarms, on-screen graphs, and a therapy-oriented interface reduce training time and give clinicians instant insight into delivery status and patient activity.
The CADD-Solis 2100 is built around the PharmGuard® Medication Safety Software ecosystem, allowing pharmacists to load customized drug libraries, set soft and hard dose limits, and push protocol updates directly to pumps — including wirelessly when the optional Communication Module is installed.
IPR Medical buys, sells, and repairs the CADD-Solis 2100 and stocks replacement parts. Whether your facility is expanding its fleet, replacing a damaged unit, or needs a trusted service partner for ongoing maintenance and software updates, IPR Medical is ready to help. Contact us at 855-477-8866 or cs@iprmed.com.
-
CADD Prizm VIP
The CADD-Prizm® ambulatory infusion pump provides measured medication therapy to patients in hospital or outpatient settings. The CADD-Prizm® pump is indicated for intravenous, intra-arterial, subcutaneous, intraperitoneal, epidural space, or subarachnoid space infusion. PCA delivery is intended for therapies that require a continuous rate of infusion, patient-controlled demand doses, or both (such as patient-controlled analgesia). Continuous delivery allows the infusion of drug at a constant, programmed rate while intermittent delivery allows the infusion of a specific volume of drug at a regular, programmed interval. The final delivery program, TPN (Total Parenteral Nutrition), allows the infusion of nutritional solutions or other fluids, with optional tapering at the beginning and end of infusion.
Features
- Easy to read display
- Reliable and Durable
- Programming flexibility
- Air-in-Line detector
- Event memory log
- Lock levels for patient safety
-
CADD Legacy Plus 6500
The Smiths Medical CADD-Legacy® PLUS (Model 6500) expands on the CADD-Legacy® continuous infusion platform with the addition of a fully programmable intermittent delivery mode — making it a versatile choice for therapies that require both steady background infusion and scheduled bolus dosing. The 6500 supports rates from 0.1 to 125 ml/hr in continuous mode and dose volumes up to 1,000 ml in intermittent mode, with an internal clock that keeps scheduled doses on time automatically. This makes it particularly well suited for ambulatory antibiotic protocols (OPAT), cyclic parenteral nutrition, hydration regimens, and other time-dependent therapies administered in home or outpatient settings.
The 6500 features the same proven safety architecture as the rest of the CADD-Legacy® family: upstream and downstream occlusion sensors, adjustable air-in-line detection, cassette detection, a three-level security lock system, and a 1,000-event downloadable pump history. System delivery accuracy is ±6% (nominal).
IPR Medical buys, sells, repairs, and stocks parts and administration sets for the Smiths Medical CADD-Legacy® PLUS (Model 6500). Contact us at 855-477-8866 or cs@iprmed.com.
-
CADD Legacy PCA 6300
The Smiths Medical CADD-Legacy® PCA (Model 6300) is the dedicated pain management model in the CADD-Legacy® ambulatory infusion family, purpose-built for patient-controlled analgesia and clinician-managed analgesic protocols. It supports three delivery modes — a programmable continuous background infusion, a patient-activated demand dose via pump button or remote dose cord, and a clinician-administered bolus — giving the care team and patient precisely the level of control their protocol requires. The 6300 can be programmed in ml, mg, or mcg units with concentration entry, accommodating a wide range of opioid and non-opioid analgesic regimens across intravenous, subcutaneous, epidural, subarachnoid, and other routes.
System delivery accuracy is ±6% (nominal), weight is 0.86 lbs on two AA alkaline batteries, and battery life reaches approximately 40 hours at a moderate continuous rate of 30 ml/hr — or approximately 14 days at low-rate protocols — supporting home PCA patients between pharmacy or clinic visits. The 6300 shares the same 1,000-event downloadable audit trail, three-level security lock system, and full alarm suite as the rest of the CADD-Legacy® family.
IPR Medical buys, sells, repairs, and stocks parts and administration sets for the Smiths Medical CADD-Legacy® PCA (Model 6300). Contact us at 855-477-8866 or cs@iprmed.com.
IPR Medical
0
Cart:
$0.00
No products in the cart.
Shop all products
Shop
