-
Baxter Auto Syringe AS40A Infusion Pump
$995.00The Baxter Auto Syringe AS40A is a compact, single-channel syringe infusion pump designed for accurate continuous or intermittent delivery of fluids and medications. It supports IV, intra-arterial, epidural, and subcutaneous routes, accepts standard disposable syringes from 1 mL to 60 mL across three manufacturers, and operates on internal rechargeable battery or AC charger for bedside, transport, and ambulatory use.
Pump Type
Single-channel syringe infusion pumpFlow Rate Range
0.01 to 360 mL/hr (syringe-dependent)Compatible Syringes
B-D Plastipak, Monoject, and Terumo, 1–60 mLBattery
Internal NiCd rechargeable pack; 12 hr at 2 mL/hr (60 mL syringe)Notable Features
Bolus, titration, auto syringe recognition, auto-lock, configurable occlusion sensitivityLooking for a newer alternative? Consider upgrading to the Baxter AS50 — the direct next-generation successor sharing the same compact form factor and syringe compatibility, with an extended flow rate ceiling of 438 ml/h and an upgraded rechargeable battery — or the Medfusion 3500 Version 6, a modern syringe pump with a built-in drug library options and full third-party service support.
Please note: Baxter has ended manufacturer support for the AS40A. IPR Medical buys, sells, and repairs the Baxter AS40A and stocks replacement parts to keep these pumps performing reliably in the field. Contact us at 855-477-8866 or cs@iprmed.com.
-
B Braun Outlook 100
The Outlook™ 100 is intended for use with B. Braun Medical Inc. Horizon® Pump IV Sets to regulate the flow of primary and secondary fluids when positive pressure is required. The infusion system is capable of delivering fluid from a negative head height (when the IV fluid container is lower than the pump), and provides clinically accepted volumetric accuracy for all standard IV fluids, including blood, lipids, and Total Parenteral Nutrition (TPN).
Positive pressure is frequently a necessity, but clinical experience shows that high pressure limits may increase the severity of an infiltration without causing an alarm. Because there is a need to control pump pressure settings, the Outlook ES has user-selectable Occlusion Limit settings which start at 75 mmHg and extend to 750 mmHg.
The pump is equipped with distinct audible and visual alarm signals to indicate Keep Vein Open (KVO), low battery, and other alarm conditions.
Features
- Promotes patient safety by helping to avoid accidental under- or overdosing using audible
- and visual alerts
- Provides flexibility for each care area—ability to customize dose limits to your hospital drug formulary
- Promotes clinician choice with dose limit override when limits are exceeded during manual programming and titration
- Visually indicates dose selection with DoseGuard™ software
- Easy to learn:
– Manual operation RATE, VOLUME, RUN
– Automatic Dose Rate Calculator
– Large, highly visible keys
- Reduce nuisance air-in-line alarms with air-trapping cassette
- Stackable modular design reduces bedside cord clutter and errors due to channel confusion
- Comprehensive line of needle-free administration sets including UV light resistant tubing that protects drug efficacy
-
Compatible GE Corometrics Nautilus Toco Compatible Fetal Transducer, Knob & Wings
Original price was: $325.00.$275.00Current price is: $275.00.Why choose one attachment style when you can have both? This compatible GE Corometrics Nautilus toco fetal transducer features a combo knob-and-wings top cover, giving your labor and delivery staff the flexibility to use either a button (knob) or loop (wings) belt attachment on the same unit. There is no need to stock two separate transducer SKUs or search for the right style mid-shift — one transducer handles both.
Like all Corometrics Nautilus toco transducers, it monitors the duration, frequency, and relative pressure of uterine contractions via the maternal abdomen and transmits that data in real time to the fetal monitor. The flat, low-profile housing improves patient comfort during extended monitoring, and the watertight construction supports thorough between-patient disinfection.
This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:
Series
Compatible Models100 Series
116, 118, 120, 128, 129, 130, 145, 150, 151, 155170 Series
170, 171, 172, 173, 174250 Series
250, 250cx, 256cx, 259, 259cx300 Series
340IPR Medical stocks this compatible combo toco transducer so your labor and delivery team always has a ready replacement on hand. Call us at 855-477-8866 or email cs@iprmed.com.
-
Compatible GE Corometrics Nautilus Ultrasound Compatible Fetal Transducer, Knob & Wings
Original price was: $325.00.$295.00Current price is: $295.00.Complete fetal monitoring requires two transducers — and this is the other half of the pair. While the toco monitors uterine contractions, this compatible GE Corometrics Nautilus ultrasound fetal transducer tracks fetal heart rate using pulsed Doppler technology, transmitting real-time data to the fetal monitor for continuous labor surveillance. This combo knob-and-wings version features a modified top cover that supports both belt attachment styles on a single unit — button (knob) or loop (wings) — so your labor and delivery staff can work the way they prefer without needing two separate SKUs on the shelf.
The 9-crystal pulsed Doppler design provides a wide focal region for reliable fetal heart rate detection across a range of fetal positions and maternal body types, and the watertight construction supports in-water use and thorough between-patient disinfection.
This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:
Series
Compatible Models100 Series
116, 118, 120, 128, 129, 130, 145, 150, 151, 155170 Series
170, 171, 172, 173, 174250 Series
250, 250cx, 256cx, 259, 259cx300 Series
340IPR Medical stocks this compatible combo ultrasound transducer so your labor and delivery team always has a ready replacement on hand. Call us at 855-477-8866 or email cs@iprmed.com.
-
Compatible GE Corometrics TOCO Fetal Transducer, Knob, 2264HAX
Original price was: $375.00.$325.00Current price is: $325.00.Reliable fetal monitoring starts with the right transducer. This compatible toco (tocodynamometer) transducer is a direct replacement for the GE Corometrics 2264HAX, providing accurate external monitoring of uterine contraction frequency, duration, and relative pressure throughout labor and delivery.
The knob (button) style connector threads securely into the corresponding port on GE Corometrics fetal monitors and locks the transducer in place against the maternal abdomen with a standard monitoring belt. The low-profile, flat design prioritizes patient comfort during extended monitoring sessions, while the watertight construction withstands routine cleaning and disinfection between patients.
This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:
Series
Compatible Models100 Series
116, 118, 120, 128, 129, 130, 145, 150, 151, 155170 Series
170, 171, 172, 173, 174250 Series
250, 250cx, 256cx, 259, 259cx300 Series
340IPR Medical stocks this compatible replacement transducer so your labor and delivery team can keep monitoring without delays. Call us at 855-477-8866 or email cs@iprmed.com.
-
Compatible GE Corometrics Toco Fetal Transducer, Wings, 2264LAX
Original price was: $325.00.$264.00Current price is: $264.00.Reliable fetal monitoring starts with the right transducer. This compatible toco (tocodynamometer) transducer is a direct replacement for the GE Corometrics 2264LAX, providing accurate external monitoring of uterine contraction frequency, duration, and relative pressure throughout labor and delivery. The wing (loop) style connector secures firmly into GE Corometrics fetal monitors and stays fixed to the maternal abdomen with a standard monitoring belt. The low-profile, flat design prioritizes patient comfort during extended monitoring sessions, while the watertight construction withstands routine cleaning and disinfection between patients.
This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:
Series
Compatible Models100 Series
116, 118, 120, 128, 129, 130, 145, 150, 151, 155170 Series
170, 171, 172, 173, 174250 Series
250, 250cx, 256cx, 259, 259cx300 Series
340IPR Medical stocks this compatible replacement transducer so your labor and delivery team can keep monitoring without delays. Call us at 855-477-8866 or email cs@iprmed.com.
-
Compatible GE Corometrics Ultrasound Fetal Transducer, Knob, 5700HAX
Original price was: $325.00.$297.00Current price is: $297.00.Accurate fetal heart rate monitoring during labor starts with a reliable ultrasound transducer. This compatible GE Corometrics Nautilus ultrasound fetal transducer is a direct replacement for the 5700HAX, using pulsed Doppler technology to continuously detect and display fetal heart rate on your GE Corometrics fetal monitor. The knob (button) style proximal connector threads securely into the monitoring belt for a positive, locked attachment that stays in place during patient repositioning.
The 9-crystal array provides a wide focal region for dependable signal pickup across a range of fetal positions and maternal body types, and the watertight construction supports in-water monitoring and thorough between-patient disinfection.
This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:
Series
Compatible Models100 Series
116, 118, 120, 128, 129, 130, 145, 150, 151, 155170 Series
170, 171, 172, 173, 174250 Series
250, 250cx, 256cx, 259, 259cx300 Series
340IPR Medical stocks this compatible replacement ultrasound transducer so your labor and delivery team always has a ready replacement on hand. Call us at 855-477-8866 or email cs@iprmed.com.
-
Compatible GE Corometrics Ultrasound Fetal Transducer, Wings, 5700LAX
Original price was: $325.00.$297.00Current price is: $297.00.Accurate fetal heart rate monitoring during labor starts with a reliable ultrasound transducer. This compatible GE Corometrics Nautilus ultrasound fetal transducer is a direct replacement for the 5700LAX, using pulsed Doppler technology to continuously detect and display fetal heart rate on your GE Corometrics fetal monitor. The wings (loop) style proximal connector slides and snaps securely into the monitoring belt for a fast, tool-free attachment that many clinicians prefer for speed during quick admissions and transducer repositioning.
The 9-crystal array provides a wide focal region for dependable signal pickup across a range of fetal positions and maternal body types, and the watertight construction supports in-water monitoring and thorough between-patient disinfection.
This transducer features a round, keyed 12-pin distal connector, a 10 ft gray cable, and is manufactured latex-free and DEHP-free. It is compatible with the following GE Corometrics fetal monitor models:
Series
Compatible Models100 Series
116, 118, 120, 128, 129, 130, 145, 150, 151, 155170 Series
170, 171, 172, 173, 174250 Series
250, 250cx, 256cx, 259, 259cx300 Series
340IPR Medical stocks this compatible replacement ultrasound transducer so your labor and delivery team always has a ready replacement on hand. Call us at 855-477-8866 or email cs@iprmed.com.
-
HotDog Patient Warming System Conductive Warming Controller
The HotDog® Patient Warming System (Model WC5X) by Augustine Temperature Management is an air-free, water-free conductive warming controller designed to prevent and treat unintended hypothermia in surgical and procedural settings. Unlike forced-air systems, the WC5X delivers low-voltage current through its patented ThermAssure® semi-conductive polymer fabric in compatible HotDog Warming Blankets and Mattresses — with no blowing air, no waste heat, and no risk of sterile field contamination. The controller supports up to five warming devices simultaneously (Ports A–E), with independent temperature control for Blanket ports (98.6°F–109.4°F) and Mattress port (95°F–102.2°F), dual over-temperature safety shutoffs, and a six-hour automatic safety timer. It mounts to an IV pole, OR table rail, or flat surface — making it a versatile fit for operating rooms, recovery rooms, and medical/surgical floors.
IPR Medical buys, sells, repairs, and stocks parts for the HotDog Patient Warming System. Contact us at 855-477-8866 or cs@iprmed.com.
-
Philips Avalon CL Wireless Toco+ MP Transducer (866075)
$1,995.00The Philips Avalon CL Wireless Toco+ MP Transducer (866075) is the cableless uterine activity transducer in the Avalon CL Fetal Transducer System — measuring uterine contractions via external Toco while simultaneously capturing maternal pulse through integrated Smart Pulse technology. It also includes a multi-purpose connector that accepts maternal ECG, fetal ECG (DECG), or intrauterine pressure (IUP) sensors, making the 866075 one of the most versatile transducers on the L&D floor. Paired with the Avalon CL Base Station (866074) and Avalon FM20, FM30, FM40, or FM50 fetal monitors, it delivers the same performance as wired Smart Transducers while letting mothers walk, shower, or reposition during labor at ranges up to 100 m (300 ft) line of sight.
The 866075 is watertight for underwater monitoring, weighs only about 0.6 lbs (0.27 kg), and docks directly into the Avalon CL base station for automatic pairing and battery recharging.
IPR Medical sells, buys, repairs, and stocks parts and accessories for the Philips Avalon CL system, including transducers, base stations, belts, and replacement batteries. Contact us at 855-477-8866 or cs@iprmed.com.
-
Philips Avalon CL Wireless Transducer Base Station (866074)
Original price was: $2,695.00.$2,495.00Current price is: $2,495.00.The Philips Avalon CL Wireless Transducer Base Station (866074) is the hub of the Philips Avalon CL cableless fetal monitoring system — the docking station, charger, and wireless gateway that transforms a wired Avalon fetal monitor into a fully cableless L&D solution. A single 866074 base station docks up to three cableless fetal transducers (866075 Toco+ MP, 866076 Ultrasound, and 866077 ECG/IUP) plus one maternal parameters slot for an IntelliVue CL Pod or range extension module, with a total assignment capacity of four CL transducers and two CL Pods. It connects to any Philips Avalon FM20, FM30, FM40, or FM50 fetal monitor via the fetal sensor socket — or to the rear telemetry connectors on the FM40 and FM50 — and delivers a line-of-sight operating range of up to 100 m (300 ft).
Docked transducers and pods are assigned and recharged automatically, so labor teams can grab a patient-ready device and apply it with no setup. The 866074 base station is required for all Avalon CL transducers and pods. IPR Medical sells, buys, repairs, and stocks parts for the Philips Avalon CL system — including base stations, transducers, antennas, power supplies, and replacement batteries. Contact us at 855-477-8866 or cs@iprmed.com.
-
Philips Avalon CL Wireless Ultrasound Transducer (866076)
Original price was: $1,695.00.$1,495.00Current price is: $1,495.00.The Philips Avalon CL Wireless Ultrasound Transducer (866076) is the cableless fetal heart rate transducer in the Avalon CL Fetal Transducer System — a Smart Transducer with an onboard microprocessor that captures, processes, and digitally transmits the fetal heart rate signal directly to the Avalon fetal monitor. Its seven-crystal array (six crystals arranged around the perimeter with one in the center, in equilateral triangle geometry) delivers uniform acoustic coverage and strong cardiac detection with minimal repositioning, making it especially effective for twins, triplets, and active labor. Paired with the Avalon CL Base Station (866074) and Avalon FM20, FM30, FM40, or FM50 fetal monitors, it delivers the same measurement performance as wired Smart Transducers at ranges up to 100 m (300 ft) line of sight.
The 866076 supports Cross-Channel Verification (CCV) to prevent maternal-fetal heart rate confusion, Fetal Movement Profile (FMP) for high-risk pregnancy monitoring, and automatic channel assignment (FHR1/FHR2/FHR3) when multiple transducers are in use. It is watertight for underwater monitoring, weighs approximately 0.6 lbs (0.27 kg), and docks directly into the Avalon CL base station for automatic pairing and battery recharging.
IPR Medical sells, buys, repairs, and stocks parts and accessories for the Philips Avalon CL system, including transducers, base stations, belts, and replacement batteries. Contact us at 855-477-8866 or cs@iprmed.com.
IPR Medical
0
Cart:
$0.00
No products in the cart.
Shop all products
Shop
