IPR Medical

0 Cart: $0.00
Shopping Cart(0)
No products in the cart. Shop all products
0 Cart: $0.00
Shopping Cart(0)
No products in the cart. Shop all products
Shop
Search
0 Cart: $0.00
Shopping Cart(0)
No products in the cart. Shop all products
Shop

Shop

HomeShopPage 5
  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A02C12, 12-Lead ECG & Nellcor OxiMax SpO2

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A02C12) is the 12-lead ECG configuration of the IntelliVue Multi-Measurement Module for facilities standardized on Nellcor OxiMax sensors. Building on the A02 standard package — ECG, arrhythmia, ST, respiration, Nellcor OxiMax-compatible SpO2, and oscillometric NBP — the C12 option adds conventional 12-lead ECG capture and EASI-derived 12-lead ECG using only 5 electrodes. The A02C12 is clinically identical to the A01C12 in every respect except that the SpO2 interface uses a dedicated OxiMax-compatible circuit rather than Philips FAST SpO2, and OxiMax sensors connect through the M1943NL adapter cable rather than directly to the module’s SpO2 port. It is the correct choice for facilities that require documented, diagnostic-quality 12-lead ECG recordings alongside continuous monitoring and are standardized on Nellcor OxiMax sensors, but do not need invasive pressure or temperature within the MMS module itself.

    Part Number / Option
    M3001A, Option A02C12

    Parameters Monitored
    ECG (3/5/12-lead), EASI ECG, Arrhythmia, ST (up to 12-lead), QT/QTc, Respiration, Nellcor OxiMax SpO2, NBP (oscillometric)

    SpO2 Technology
    Nellcor OxiMax-compatible — requires M1943NL adapter cable for OxiMax sensor connection

    12-Lead ECG
    Yes — conventional 12-lead capture with diagnostic signal quality (ANSI/AAMI EC11); EASI 12-lead using 5 electrodes also supported

    Invasive Pressure / Temperature
    Not included in Option A02C12 — available with Option A02C18

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A01C12, 12-Lead ECG & FAST SpO2

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A01C12) is the 12-lead ECG configuration of the IntelliVue Multi-Measurement Module with Philips FAST SpO2. Building on the A01 standard package — ECG, arrhythmia, ST, respiration, FAST SpO2, and oscillometric NBP — the C12 option adds conventional 12-lead ECG capture capability and EASI-derived 12-lead ECG using only 5 electrodes. The A01C12 is the correct choice for facilities that require diagnostic-quality 12-lead ECG at the bedside alongside continuous monitoring but do not need invasive pressure or temperature measurement in the MMS module itself. It is widely deployed in step-down units, telemetry floors, cardiac monitoring environments, and pre-/post-procedure areas where 12-lead ECG documentation is a standard clinical workflow. As with all M3001A variants, patient demographics, trend data, and measurement settings are stored within the module and travel with the patient between IntelliVue host monitors.

    Part Number / Option
    M3001A, Option A01C12

    Parameters Monitored
    ECG (3/5/12-lead), EASI ECG, Arrhythmia, ST (up to 12-lead), QT/QTc, Respiration, Philips FAST SpO2, NBP (oscillometric)

    SpO2 Technology
    Philips FAST SpO2 — compatible with Nellcor OxiMax sensors

    12-Lead ECG
    Yes — conventional 12-lead capture with diagnostic signal quality (ANSI/AAMI EC11); EASI 12-lead using 5 electrodes also supported

    Invasive Pressure / Temperature
    Not included in Option A01C12 — available with Option A01C18

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A01C18, 12-Lead ECG, FAST SpO2, IBP & Temp

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A01C18) is the fully loaded single-module configuration of the IntelliVue Multi-Measurement Module with Philips FAST SpO2. The C18 option combines two extended measurement packages into one: the 12-lead ECG capability of the C12 option and the invasive pressure/temperature channel of the C06 option. The result is a module that delivers 3-, 5-, and 12-lead ECG with arrhythmia and ST monitoring, EASI-derived ECG, respiration, Philips FAST SpO2, oscillometric NBP, and either invasive blood pressure or temperature — the broadest parameter set available in a single M3001A configuration. The A01C18 is the configuration of choice for cardiovascular ICUs, cardiac catheterization labs, ORs, and transport environments where diagnostic-quality 12-lead ECG and hemodynamic monitoring are required alongside the full core vital signs package. As with all M3001A C-option configurations, invasive pressure and temperature share a single connector and cannot be used simultaneously without an MMS extension.

    Part Number / Option
    M3001A, Option A01C18

    Parameters Monitored
    ECG (3/5/12-lead), EASI ECG, Arrhythmia, ST (up to 12-lead), QT/QTc, Respiration, Philips FAST SpO2, NBP (oscillometric), Invasive Pressure OR Temperature (shared port — not simultaneous)

    SpO2 Technology
    Philips FAST SpO2 — compatible with Nellcor OxiMax sensors

    12-Lead ECG
    Yes — conventional 12-lead capture with diagnostic signal quality (ANSI/AAMI EC11); EASI 12-lead using 5 electrodes also supported

    IBP / Temp Port
    One combined connector — supports invasive pressure transducer OR temperature probe; cannot be used simultaneously on this port

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A02C06, Nellcor OxiMax SpO2, IBP & Temp

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A02C06) is the extended-measurement configuration of the IntelliVue Multi-Measurement Module for facilities standardized on Nellcor OxiMax sensors. Building on the A02 standard package — ECG, arrhythmia, ST, respiration, Nellcor OxiMax-compatible SpO2, and oscillometric NBP — the C06 option adds a combined invasive pressure and temperature connector, enabling the module to support either invasive blood pressure monitoring or temperature measurement in addition to the full core parameter set. The A02C06 is the OxiMax-sensor equivalent of the A01C06, delivering an identical clinical measurement footprint while using a dedicated OxiMax-compatible SpO2 interface in place of the Philips FAST SpO2 circuit. This configuration is widely deployed in ICU, cardiovascular step-down, post-anesthesia care, and critical care transport environments where arterial line monitoring or core temperature tracking is routinely required alongside a Nellcor OxiMax sensor fleet. As with all M3001A variants, patient demographics, trend data, and measurement settings are stored in the module itself and travel with the patient between IntelliVue host monitors.

    Part Number / Option
    M3001A, Option A02C06

    Parameters Monitored
    ECG (3/5-lead), Arrhythmia, ST, Respiration, Nellcor OxiMax SpO2, NBP (oscillometric), Invasive Pressure OR Temperature (shared port — not simultaneous)

    SpO2 Technology
    Nellcor OxiMax-compatible — requires M1943NL adapter cable for OxiMax sensor connection

    IBP / Temp Port
    One combined connector — supports invasive pressure transducer OR temperature probe; pressure and temperature cannot be used simultaneously on this port

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A01C06, FAST SpO2, IBP & Temp

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A01C06) is the extended-measurement configuration of the IntelliVue Multi-Measurement Module with Philips FAST SpO2. Building on the A01 standard package — ECG, arrhythmia, ST, respiration, FAST SpO2, and oscillometric NBP — the C06 option adds a combined invasive pressure and temperature connector, enabling the module to support either invasive blood pressure monitoring or temperature measurement in addition to the full core parameter set. This makes the A01C06 the most clinically complete single-MMS configuration available without adding 12-lead ECG, and the module most commonly deployed in ICU, step-down, and critical care transport environments where arterial line monitoring or core temperature tracking is routinely required. As with all M3001A variants, patient demographics, trend data, and measurement settings are stored in the module itself and travel with the patient between IntelliVue host monitors.

    Part Number / Option
    M3001A, Option A01C06

    Parameters Monitored
    ECG (3/5-lead), Arrhythmia, ST, Respiration, Philips FAST SpO2, NBP (oscillometric), Invasive Pressure OR Temperature (shared port — not simultaneous)

    SpO2 Technology
    Philips FAST SpO2 — compatible with Nellcor OxiMax sensors

    IBP / Temp Port
    One combined connector — supports invasive pressure transducer OR temperature probe; pressure and temperature cannot be used simultaneously on this port

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A04, Nellcor OxiMax SpO2

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A04) is the newer-hardware-generation Nellcor OxiMax-compatible configuration of the IntelliVue Multi-Measurement Module. Like the A02, the A04 uses a dedicated Nellcor OxiMax-compatible SpO2 interface and delivers the same core clinical measurement set — ECG, arrhythmia, ST, respiration, OxiMax SpO2, and oscillometric NBP — to any compatible IntelliVue host monitor. The defining distinction from the A02 is internal: the A04 runs on the newer hardware revision C platform, identified by serial number prefixes DE610, DE632, DE717, and DE907, which integrates the DC/DC power circuit onto the main board rather than as a separate component. This hardware generation supports a wider range of IntelliVue software revisions and uses a distinct parameter board assembly. The A04 is the correct Nellcor OxiMax module choice for facilities sourcing units or parts for newer-generation M3001A hardware, or for host monitors requiring hardware revision C compatibility.

    Part Number / Option
    M3001A, Option A04

    Parameters Monitored
    ECG (3/5-lead), Arrhythmia, ST, Respiration, Nellcor OxiMax SpO2, NBP (oscillometric)

    SpO2 Technology
    Nellcor OxiMax-compatible — for use with Nellcor OxiMax sensor line via M1943NL adapter cable

    Hardware Generation
    Revision C — serial number prefixes DE610, DE632, DE717, DE907; newer platform vs. A02

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A02, Nellcor OxiMax SpO2

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A02) is the Nellcor OxiMax-compatible configuration of the IntelliVue Multi-Measurement Module for the IntelliVue bedside patient monitoring platform. Functionally identical to the standard M3001A in ECG, arrhythmia, ST, respiration, and oscillometric NBP capability, the A02 option is specifically engineered for facilities standardized on Nellcor OxiMax sensors — using a dedicated OxiMax-compatible SpO2 interface rather than the Philips FAST SpO2 circuit found in Option A01. The module plugs directly into the rear of any compatible IntelliVue host monitor — or connects via MSL cable — and transmits all measurement data to the host display without requiring cable changes or parameter re-setup between units. Patient demographics, trend data, and measurement settings are stored within the module itself, so the patient record travels with the MMS when the patient moves between units or monitors.

    Part Number / Option
    M3001A, Option A02

    Parameters Monitored
    ECG (3/5-lead), Arrhythmia, ST, Respiration, Nellcor OxiMax SpO2, NBP (oscillometric)

    SpO2 Technology
    Nellcor OxiMax-compatible — for use with Nellcor OxiMax sensor line

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    Optional Extensions
    M3015A (sidestream CO2), M3016A (mainstream CO2), M3012A (additional press/temp/CO2)

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

     

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A01, FAST SpO2

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A01) is the standard-configuration Multi-Measurement Module for the IntelliVue bedside patient monitoring platform. Designed to plug directly into the rear of IntelliVue MP-series and MX-series host monitors — or connect via MSL cable — the M3001A acquires and transmits ECG, arrhythmia, ST segment, respiration, Philips FAST SpO2, and oscillometric NBP measurements to the host display without requiring cable changes or parameter re-setup. Because patient demographics, trend data, and measurement settings are stored in the module itself, the M3001A travels with the patient: disconnect it at one IntelliVue monitor and reconnect it at another, and the patient record follows seamlessly. The A01 option designates Philips FAST SpO2 pulse oximetry technology and is compatible with the full Nellcor OxiMax sensor line.

    Part Number / Option
    M3001A, Option A01

    Parameters Monitored
    ECG (3/5-lead), Arrhythmia, ST, Respiration, Philips FAST SpO2, NBP (oscillometric)

    SpO2 Technology
    Philips FAST SpO2 — compatible with Nellcor OxiMax sensors

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    Optional Extensions
    M3015A (sidestream CO2), M3016A (mainstream CO2), M3012A (additional press/temp/CO2)

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

  • -23%
    Recertified
    Quick View

    Philips IntelliVue MP70 Patient Monitor | Touchscreen, 12-Lead ECG

    Original price was: $1,295.00.Current price is: $995.00.

    The Philips IntelliVue MP70 (M8007A) is a high-performance bedside patient monitor designed for adult, pediatric, and neonatal intensive care; anesthesia and peri-operative care; and cardiac care environments. Integrating a 15-inch color XGA touchscreen display with an extensive clinical measurement menu — including conventional diagnostic 12-lead ECG, multi-lead arrhythmia analysis, and Event Surveillance — the MP70 operates on Philips’ networked IntelliVue platform, enabling seamless data flow across the hospital enterprise. Its modular architecture supports the Multi-Measurement Server (MMS), MMS extensions, and the Flexible Module Server (FMS), making it a configurable solution for evolving departmental needs.

    Display
    15″ color XGA LCD touchscreen

    Waveforms
    Up to 8 simultaneously; 12-lead ECG screen available

    User Interface
    Touchscreen (standard); optional SpeedPoint and Remote SpeedPoint

    Patient Population
    Adult, Pediatric, Neonatal

    SpO2 Technology
    Philips FAST SpO2, Masimo SET, Nellcor OxiMax

    Screen Configurations
    10 pre-set configurations; fully customizable

    Module Support
    MMS, MMS extensions, FMS (8 slots); 2 integrated plug-in slots (modules sold separately)

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue MP70. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    RecertifiedQuick View

    Curlin Painsmart IOD PCA

    Original price was: $1,095.00.Current price is: $995.00.

    The CURLIN PainSmart™ IOD (Information on Demand) is Moog Medical’s purpose-built ambulatory PCA pump, designed to safely deliver patient-controlled analgesia, and patient-controlled epidural analgesia (PCEA). Built on the proven CURLIN 6000 volumetric platform, the PainSmart IOD lets patients, nurses, and caregivers retrieve real-time infusion data — hourly totals, boluses attempted and given, line pressure, battery status — instantly at the bedside without pausing the running infusion. That combination of clinical transparency and uninterrupted therapy has made the PainSmart IOD one of the most widely trusted ambulatory PCA pumps in the United States.

    The pump delivers via three administration routes — IV, epidural, and subcutaneous — and programs in milligrams, micrograms, or milliliters depending on clinical workflow. Its patented curvilinear peristaltic pumping mechanism achieves ±5% volumetric accuracy with a flow resolution as low as 2 microliters, producing more precise and steady delivery than standard linear peristaltic designs throughout the full infusion duration. The pump is powered by two standard C-cell alkaline batteries and runs approximately 85 hours at 2 ml/h, 30 hours at 125 ml/h, or 10 hours at 400 ml/h. At just 18.1 oz (513 g), it fits in any of four carry packs for full ambulatory use, or mounts to a pole with the detachable pole clamp.

    IPR Medical buys, sells, repairs, and stocks parts for the Moog CURLIN PainSmart IOD. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    RecertifiedQuick View

    Curlin Painsmart IOD Epidural

    Original price was: $1,095.00.Current price is: $995.00.

    The Moog Curlin PainSmart IOD EPI is a compact ambulatory infusion pump built on the proven Curlin 6000 platform and factory-configured specifically for epidural pain management. It is purpose-built for patient-controlled epidural analgesia (PCEA), continuous epidural infusion, and subcutaneous pain therapies in postoperative, labor and delivery, palliative care, and ambulatory surgery settings. The EPI designation means the pump’s administration route is fixed to epidural — the Therapy Identifier bar displays “EPI” rather than “PCA” — reducing programming confusion and reinforcing safe practice in clinical environments where epidural lines are managed alongside other infusions.

    Like all PainSmart IOD models, the EPI variant features dedicated Info-On-Demand buttons that allow clinicians to view real-time infusion data — hourly totals, boluses attempted and given, shift totals, and line pressure — without pausing the running therapy. The epidural basal rate maximum is 25 ml/h, and patient bolus doses are programmable from 0.1 to 25 ml per dose with a lockout interval of 1 to 60 minutes. Built-in medLMTS™ medication limits, PLSS protocol library support, three tamper-resistant lock levels, and a 6,000-event data log provide comprehensive safety and documentation.  Moog’s yellow-striped epidural administration sets with 0.22 micron filters and integral flow-stop free-flow protection are designed specifically for this pump configuration.

    IPR Medical buys, sells, repairs, and stocks parts for the Moog Curlin PainSmart IOD EPI. Whether you need a recertified pump, replacement parts, or a repair on an existing unit, contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    RecertifiedQuick View

    Curlin Painsmart

    Original price was: $1,095.00.Current price is: $995.00.

    The Moog Curlin PainSmart is a compact, lightweight ambulatory infusion pump built on the proven Curlin 6000 platform and designed specifically for PCA (Patient Controlled Analgesia), PCEA, and subcutaneous pain management therapies. At just 1.1 lbs and roughly the size of a deck of cards, the PainSmart supports intravenous, epidural, and subcutaneous administration routes with delivery in milliliters, milligrams, or micrograms. Flow rates range from 0.1 to 400 ml/h with 0.1 ml/h resolution, and the patented curvilinear peristaltic mechanism delivers fluid in 2-microliter increments for exceptionally smooth, consistent delivery — particularly important for short half-life drugs and low-rate infusions.

    The PainSmart features built-in medication limits (medLMTS™), customizable maximum basal, bolus, clinician dose, and load dose limits, adjustable downstream occlusion settings, an integral air-in-line sensor, and three tamper-resistant lock levels for patient safety. The optional Info-On-Demand (IOD) model adds real-time bedside access to hourly totals, bolus data, and infusion status without pausing the pump. The pump runs on two standard C-cell alkaline batteries with operating times up to 85 hours at 2 ml/h, and accepts an optional rechargeable Li-Ion battery pack and AC adapter for extended or facility-based use.

    IPR Medical buys, sells, repairs, and stocks parts for the Moog Curlin PainSmart. Whether you need a recertified pump, a replacement part, or a repair on an existing unit, contact us at 855-477-8866 or cs@iprmed.com.

What are you looking for?