Shop Recertified Medical Equipment & Parts

-9%

Recertified
Quick View

Philips IntelliVue M3001A Multi-Measurement Module | Option A04, Nellcor OxiMax SpO2
Original price was: $1,095.00.Current price is: $995.00.

The Philips IntelliVue M3001A (Option A04) is the newer-hardware-generation Nellcor OxiMax-compatible configuration of the IntelliVue Multi-Measurement Module. Like the A02, the A04 uses a dedicated Nellcor OxiMax-compatible SpO2 interface and delivers the same core clinical measurement set — ECG, arrhythmia, ST, respiration, OxiMax SpO2, and oscillometric NBP — to any compatible IntelliVue host monitor. The defining distinction from the A02 is internal: the A04 runs on the newer hardware revision C platform, identified by serial number prefixes DE610, DE632, DE717, and DE907, which integrates the DC/DC power circuit onto the main board rather than as a separate component. This hardware generation supports a wider range of IntelliVue software revisions and uses a distinct parameter board assembly. The A04 is the correct Nellcor OxiMax module choice for facilities sourcing units or parts for newer-generation M3001A hardware, or for host monitors requiring hardware revision C compatibility.

Part Number / Option
M3001A, Option A04

Parameters Monitored
ECG (3/5-lead), Arrhythmia, ST, Respiration, Nellcor OxiMax SpO2, NBP (oscillometric)

SpO2 Technology
Nellcor OxiMax-compatible — for use with Nellcor OxiMax sensor line via M1943NL adapter cable

Hardware Generation
Revision C — serial number prefixes DE610, DE632, DE717, DE907; newer platform vs. A02

Host Monitor Compatibility
IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

Data Storage
Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

Add to cart
-8%

Recertified
Quick View

Philips IntelliVue M3001A Multi-Measurement Module | Option A03, Masimo SET SpO2
Original price was: $1,195.00.Current price is: $1,095.00.

The Philips IntelliVue M3001A (Option A03) is the Masimo SET-equipped configuration of the IntelliVue Multi-Measurement Module, designed for acute care facilities standardized on the Masimo LNCS sensor platform. Sharing the same ECG, arrhythmia, ST, respiration, and oscillometric NBP capability as all M3001A variants, the A03 option integrates a dedicated Masimo SET SpO2 interface that communicates natively with Masimo LNCS sensors via the LNC MP-10 dual-key patient cable. The module docks directly to the rear of any compatible IntelliVue host monitor — or connects remotely via MSL cable — and transmits all measurement data to the host display without requiring cable changes or parameter re-setup between monitoring locations. Patient demographics, trend data, and measurement settings are stored within the module itself and travel with the patient during unit transfers.

Part Number / Option
M3001A, Option A03

Parameters Monitored
ECG (3/5-lead), Arrhythmia, ST, Respiration, Masimo SET SpO2, NBP (oscillometric)

SpO2 Technology
Masimo SET — for use with Masimo LNCS sensors via LNC MP-10 patient cable

Host Monitor Compatibility
IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

Data Storage
Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

Optional Extensions
M3015A (sidestream CO2), M3016A (mainstream CO2), M3012A (additional press/temp/CO2)

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

Add to cart
-9%

Recertified
Quick View

Philips IntelliVue M3001A Multi-Measurement Module | Option A02, Nellcor OxiMax SpO2
Original price was: $1,095.00.Current price is: $995.00.

The Philips IntelliVue M3001A (Option A02) is the Nellcor OxiMax-compatible configuration of the IntelliVue Multi-Measurement Module for the IntelliVue bedside patient monitoring platform. Functionally identical to the standard M3001A in ECG, arrhythmia, ST, respiration, and oscillometric NBP capability, the A02 option is specifically engineered for facilities standardized on Nellcor OxiMax sensors — using a dedicated OxiMax-compatible SpO2 interface rather than the Philips FAST SpO2 circuit found in Option A01. The module plugs directly into the rear of any compatible IntelliVue host monitor — or connects via MSL cable — and transmits all measurement data to the host display without requiring cable changes or parameter re-setup between units. Patient demographics, trend data, and measurement settings are stored within the module itself, so the patient record travels with the MMS when the patient moves between units or monitors.

Part Number / Option
M3001A, Option A02

Parameters Monitored
ECG (3/5-lead), Arrhythmia, ST, Respiration, Nellcor OxiMax SpO2, NBP (oscillometric)

SpO2 Technology
Nellcor OxiMax-compatible — for use with Nellcor OxiMax sensor line

Host Monitor Compatibility
IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

Data Storage
Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

Optional Extensions
M3015A (sidestream CO2), M3016A (mainstream CO2), M3012A (additional press/temp/CO2)

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

Add to cart
-9%

Recertified
Quick View

Philips IntelliVue M3001A Multi-Measurement Module | Option A01, FAST SpO2
Original price was: $1,095.00.Current price is: $995.00.

The Philips IntelliVue M3001A (Option A01) is the standard-configuration Multi-Measurement Module for the IntelliVue bedside patient monitoring platform. Designed to plug directly into the rear of IntelliVue MP-series and MX-series host monitors — or connect via MSL cable — the M3001A acquires and transmits ECG, arrhythmia, ST segment, respiration, Philips FAST SpO2, and oscillometric NBP measurements to the host display without requiring cable changes or parameter re-setup. Because patient demographics, trend data, and measurement settings are stored in the module itself, the M3001A travels with the patient: disconnect it at one IntelliVue monitor and reconnect it at another, and the patient record follows seamlessly. The A01 option designates Philips FAST SpO2 pulse oximetry technology and is compatible with the full Nellcor OxiMax sensor line.

Part Number / Option
M3001A, Option A01

Parameters Monitored
ECG (3/5-lead), Arrhythmia, ST, Respiration, Philips FAST SpO2, NBP (oscillometric)

SpO2 Technology
Philips FAST SpO2 — compatible with Nellcor OxiMax sensors

Host Monitor Compatibility
IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

Data Storage
Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

Optional Extensions
M3015A (sidestream CO2), M3016A (mainstream CO2), M3012A (additional press/temp/CO2)

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

Add to cart
-15%

RecertifiedQuick View

Philips IntelliVue MP30 Patient Monitor | 10.4″ Touchscreen, 12-Lead ECG
Original price was: $995.00.Current price is: $845.95.

The Philips IntelliVue MP30 (M8002A) is a compact, touchscreen-equipped bedside patient monitor designed for intermediate care, ambulatory surgery, post-operative care, special procedures, lower acuity environments, and in-hospital patient transport. Sharing the common IntelliVue platform and user interface with the broader MP-series family, the MP30 delivers powerful clinical measurement capability — including conventional diagnostic 12-lead ECG, multi-lead arrhythmia analysis, capnography, and SpO2 — in a portable package weighing less than 13.2 lbs combined with the Multi-Measurement Server (MMS) and battery. Wired and optional wireless networking connect the MP30 to the Philips IntelliVue Clinical Network and IntelliVue Information Center for enterprise-wide data continuity.

Display
10.4″ color TFT LCD, SVGA resolution; touchscreen standard

Waveforms
Up to 4 simultaneously (USA); 12-lead ECG screen available

User Interface
Touchscreen (standard); integrated navigation point; optional Remote SpeedPoint

Patient Population
Adult, Pediatric, Neonatal

Battery Operation
Up to 5 hours with dual lithium-ion batteries (M4605A)

Weight (system)
Less than 13.2 lbs (monitor + MMS + battery)

Connectivity
Wired LAN standard; optional IEEE 802.11 a/b/g wireless

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue MP30. Contact us at 855-477-8866 or cs@iprmed.com.

Add to cart
-23%

Recertified
Quick View

Philips IntelliVue MP70 Patient Monitor | Touchscreen, 12-Lead ECG
Original price was: $1,295.00.Current price is: $995.00.

The Philips IntelliVue MP70 (M8007A) is a high-performance bedside patient monitor designed for adult, pediatric, and neonatal intensive care; anesthesia and peri-operative care; and cardiac care environments. Integrating a 15-inch color XGA touchscreen display with an extensive clinical measurement menu — including conventional diagnostic 12-lead ECG, multi-lead arrhythmia analysis, and Event Surveillance — the MP70 operates on Philips’ networked IntelliVue platform, enabling seamless data flow across the hospital enterprise. Its modular architecture supports the Multi-Measurement Server (MMS), MMS extensions, and the Flexible Module Server (FMS), making it a configurable solution for evolving departmental needs.

Display
15″ color XGA LCD touchscreen

Waveforms
Up to 8 simultaneously; 12-lead ECG screen available

User Interface
Touchscreen (standard); optional SpeedPoint and Remote SpeedPoint

Patient Population
Adult, Pediatric, Neonatal

SpO2 Technology
Philips FAST SpO2, Masimo SET, Nellcor OxiMax

Screen Configurations
10 pre-set configurations; fully customizable

Module Support
MMS, MMS extensions, FMS (8 slots); 2 integrated plug-in slots (modules sold separately)

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue MP70. Contact us at 855-477-8866 or cs@iprmed.com.

Add to cart
Quick View

HotDog Patient Warming System Conductive Warming Controller

The HotDog® Patient Warming System (Model WC5X) by Augustine Temperature Management is an air-free, water-free conductive warming controller designed to prevent and treat unintended hypothermia in surgical and procedural settings. Unlike forced-air systems, the WC5X delivers low-voltage current through its patented ThermAssure® semi-conductive polymer fabric in compatible HotDog Warming Blankets and Mattresses — with no blowing air, no waste heat, and no risk of sterile field contamination. The controller supports up to five warming devices simultaneously (Ports A–E), with independent temperature control for Blanket ports (98.6°F–109.4°F) and Mattress port (95°F–102.2°F), dual over-temperature safety shutoffs, and a six-hour automatic safety timer. It mounts to an IV pole, OR table rail, or flat surface — making it a versatile fit for operating rooms, recovery rooms, and medical/surgical floors.

IPR Medical buys, sells, repairs, and stocks parts for the HotDog Patient Warming System. Contact us at 855-477-8866 or cs@iprmed.com.

Read more
-14%

New
Quick View

Stryker/Gaymar T/Pump TP700
Original price was: $1,395.00.Current price is: $1,195.00.

The Stryker/Gaymar T/Pump® TP700 is a professional-grade localized temperature therapy system that circulates temperature-controlled water through a Stryker Mul•T•Pad® to deliver precise warming or cooling therapy to targeted body areas. Four selectable setpoints — 50°F (cooling), 95°F, 100°F, and 107°F — cover everything from post-operative hypothermia prevention and edema management to chronic joint pain and muscle strain relief. The TP700 upgrades over the classic TP600 with a fourth warming setpoint (95°F), programmable therapy cycles (20-minute, 30-minute, or continuous), and a setpoint lockout feature that prevents accidental temperature changes mid-treatment. A three-layer safety architecture — dual temperature sensors, dual microprocessors, and a mechanical over-temperature thermostat — ensures the pad never exceeds the 107°F maximum contact surface temperature. At 6.5 lbs empty and with built-in hose and cord management, the TP700 is easy to position at bedside, in recovery, or in the OR.

IPR Medical buys, sells, and repairs the Stryker/Gaymar T/Pump TP700 and stocks compatible Mul•T•Pad® accessories and replacement parts. Contact us at 855-477-8866 or cs@iprmed.com.

Add to cart
Recertified
Quick View

Philips IntelliVue X2 Multi-Measurement Module
$1,295.00

The Philips IntelliVue X2 (M3002A) is a combined Multi-Measurement Module and portable transport monitor designed for use across the hospital continuum — from the ICU and OR to intra-hospital transport and intermediate care. In standalone mode it operates on a rechargeable battery and monitors ECG, arrhythmia, ST, respiration, SpO2, NBP, and optional invasive pressure, temperature, and CO2; when docked to a host IntelliVue monitor it seamlessly hands off all measurements, trends, and patient data as an MMS. The X2’s 3.5-inch touchscreen and configurable SmartKeys give clinicians immediate access to parameters and alarm controls without interrupting patient monitoring.

Display
3.5-inch TFT LCD touchscreen, QVGA

Parameters Monitored
ECG (3/5/6/10-lead), Arrhythmia, ST, QT/QTc, Respiration, SpO2, NBP, Temp (opt.), IBP (opt.), CO2 (opt.)

Patient Population
Adult, Pediatric, Neonatal

Battery / Portability
Rechargeable M4607A battery; up to ~3 hrs standalone; up to ~6 hrs with Battery Extension

Device Weight
1.98–2.64 lbs (depending on options)

Connectivity
Wired LAN, built-in WLAN, Short Range Radio (SRR), MSL connector

Host Monitor Compatibility
IntelliVue MP20/30/40/50/60/70/80/90 (MMS mode)

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue X2. Contact us at 855-477-8866 or cs@iprmed.com.

Select options
RecertifiedQuick View

Philips IntelliVue MX750 Patient Monitor

The Philips IntelliVue MX750 is a high-acuity bedside patient monitor designed for intensive care, cardiac care, anesthesia, and neonatal environments. Built around a 19-inch Full HD projected capacitive touchscreen, the MX750 supports up to 12 simultaneous waveforms and connects to the full IntelliVue Multi-Measurement Module ecosystem for plug-and-play parameter expansion. The monitor combines advanced alarm management, enterprise-grade cybersecurity, and direct bedside access to hospital applications via HTML5 and Citrix, making it a capable platform for demanding ICU and OR workflows.

Display
19″ Full HD LCD (TFT), 1920 × 1080, projected capacitive touch

Waveforms
Up to 12 simultaneous

Patient Population
Adult, Pediatric, Neonatal

Module Slots
Up to 8 (with 2 FMX-4 racks)

Connectivity
100BaseT LAN, RS232, USB, 802.11 wireless (optional), HTML5/Citrix

Notable Features
RFID/NFC user authentication, Advanced Event Surveillance, Alarm Advisor, Visual Patient Avatar, Early Warning Scoring

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue MX750. Contact us at 855-477-8866 or cs@iprmed.com.

Read more
Recertified
Quick View

Philips IntelliVue MX40 Wearable Patient Monitor | Telemetry

The Philips IntelliVue MX40 is a patient wearable monitor designed to provide continuous ECG monitoring, optional FAST SpO2, and impedance respiration for ambulatory patients throughout a hospital or care unit. Part of Philips’ IntelliVue family, the MX40 transmits real-time data wirelessly to the IntelliVue Information Center iX, enabling clinicians to maintain continuous oversight while patients move freely. Its 2.8″ color touchscreen, disinfectant-resistant housing, and flexible battery configuration make it well-suited for telemetry wards, step-down units, and progressive care environments.

Display
2.8″ color touchscreen, up to 5 screen formats

Parameters Monitored
ECG, Heart Rate, SpO2 (optional), Pulse Rate, Impedance Respiration, ST, QT

ECG Lead System
Standard, EASI, or Hexad — selectable in one device

Battery / Power
Three AA alkaline batteries or rechargeable lithium-ion battery pack (WLAN model: Li-ion only)

Wireless Connectivity
1.4 GHz Smart-hopping (WMTS), 2.4 GHz Smart-hopping, or 802.11 a/b/g WLAN — model dependent

Infection Control
Case design withstands high-level disinfectants including periodic sterilization

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue MX40. Contact us at 855-477-8866 or cs@iprmed.com.

Read more
-8%

RecertifiedQuick View

Philips IntelliVue MP50 Patient Monitor | Touchscreen, 12-Lead ECG
Original price was: $2,595.00.Current price is: $2,395.00.

The Philips IntelliVue MP50 is a 12-inch touchscreen, multi-parameter patient monitor built for intermediate care, transport, and general floor environments. Part of Philips’ widely deployed IntelliVue platform, the MP50 shares a common user interface and modular architecture with the full IntelliVue family — from the MP2 through the MP90 — making it a familiar, interoperable choice for facilities already invested in the ecosystem. Its combination of portability, extensive parameter support via plug-and-play MMS modules, and full IntelliVue network integration makes it one of the most versatile monitors in its class.

Display
12″ color LCD TFT, SVGA resolution, resistive touchscreen

Waveforms
Up to 6 simultaneous; 12 real-time ECG waves for 12-lead

Parameters Monitored
ECG, SpO2, NIBP, IBP, Respiration, Temp, CO2, Cardiac Output, BIS, EEG, NMT (via modules)

Patient Population
Adult, Pediatric, Neonatal

Battery / Portability
4–5 hours runtime; designed for in-hospital transport

Connectivity
Wired LAN and IEEE 802.11 a/b/g wireless; IntelliVue portal technology

Notable Features
Touchscreen (MP50-exclusive in MP40/50 family), SmartKeys, Event Surveillance, Drug Calculator, 10 preset screen profiles

IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue MP50. Contact us at 855-477-8866 or cs@iprmed.com.

Add to cart