IPR Medical

0 Cart: $0.00
Shopping Cart(0)
No products in the cart. Shop all products
0 Cart: $0.00
Shopping Cart(0)
No products in the cart. Shop all products
Shop
Search
0 Cart: $0.00
Shopping Cart(0)
No products in the cart. Shop all products
Shop

Shop

HomeShopPage 37
  • -23%
    RecertifiedQuick View

    Hospira Plum A+ 3 with Mednet

    Original price was: $1,295.00.Current price is: $995.00.

    The Plum A ®3 infusion system is designed to meet the growing demand for hospital wide device standardization, and serves a wide range of general floor and critical care needs. The infusion system consists of three component infusers, designated line 1, line 2, and line 3. By incorporating three lines into one unit, the Plum A 3 provides three primary lines, three secondary lines, and piggyback fluid delivery capabilities. Compatibility with the LifeCare® 5000 PlumSet® administration sets and accessories makes the Plum A 3 a convenient and cost-effective infusion system.

    Features
    • Dose calculation
    • Loading dose
    • Multi-step programming
    • Drug list
    • Nurse call back
    • Delayed start setting
    • Air trap
    • Air removal/backpriming
    • Air detection (proximal and distal)
    • Serial communication
    • Variable rate cap
    • Alarm history
    • Nurse call relay connector
    • Volumes infused (A, B, total volumes)
    • Variable distal pressure settings
    • Non-pulsatile volumetric accuracy
    • Microprocessor control
    • Large LCD
    • Panel back illumination on mains power
    • Lockout switch
    • Standard fulfill, partfill, syringe, and vial use
    • Enteral and parenteral fluid delivery
    • Blood and blood product delivery
    • Wide range of standard and specialty administration sets
    • Password protected keypad lock

  • -47%
    Alaris EtCO2 ModuleQuick View

    Alaris BD 8300 EtCO2 Module

    Original price was: $1,895.00.Current price is: $995.00.

    The Alaris Carefusion 8300 EtCO2 Module Uses Oridion Module patented micro stream Non-dispersive infrared (NDIR) Spectroscopy to continuously measure the amount of CO2 during every breath, the amount of CO2 present at the end of the exhalation (EtCO2) And During inhalation (FiCO2), and the respiratory rate. The EtCO2 Module is a sidestream capnograph.The Disposables deliver a sample of the inhaled and exhaled gasses from the ventilator disposable or directly from the patient into the monitor for CO2 measurement moisture and patient secretions are extracted from the sample by the micro stream inline filter while maintaining the shape of the CO2 waveform. The Alaris Carefusion/ BD 8300 EtCO2 Module release a gas sample through micro sample cell (15 Microliters).

     

    Brand new units may be available. Please contact us directly for more information.

  • -33%
    RecertifiedInfusomat Space Version GQuick View

    B Braun Infusomat Space Version U

    Original price was: $1,495.00.Current price is: $995.00.

    The B. Braun Infusomat® Space® Version U (software 586U) is a volumetric large-volume infusion pump designed for critical care, ICU, CCU, NICU, PICU, OR, and emergency settings in adult, pediatric, and neonatal patients. Delivering 0.1 to 1,200 ml/h at ±5% accuracy with a linear peristaltic pumping mechanism, the Infusomat Space Version U offers a comprehensive therapy profile set including Primary and Secondary (piggyback) infusions, Dose Over Time, Ramp and Taper, Program Mode, Intermittent, PCA, Loading Dose, and wireless AutoProgramming with EHR integration.

    Part of the B. Braun Space System, up to three pumps stack on a single pole clamp with a universal interface shared with the Perfusor Space — reducing staff training requirements across the fleet. Dual occlusion sensing monitors both upstream and downstream pressure independently. The pump integrates into SpaceStation for wireless drug library upload, EHR autoprogramming, and fleet management. WiFi requires the B. Braun WiFi battery module, available separately — all standard sales include a non-WiFi Li-Ion battery.

    Brand new units are available. Please contact us directly for more information.

    IPR Medical buys, sells, repairs, and stocks parts for the B. Braun Infusomat Space.

     

  • -9%
    NewNew
    Quick View

    Kangaroo OMNI Enteral Feeding Pump

    Original price was: $1,095.00.Current price is: $995.00.

    The Kangaroo™ OMNI™ Enteral Feeding Pump (Model 385400) is Cardinal Health’s current-generation enteral feeding platform and the designated successor to both the Kangaroo ePump and Kangaroo Joey. Launched as a platform intended to carry the Kangaroo brand from hospital to home across the full continuum of care, the OMNI holds the distinction of being the only FDA-cleared, attitude-independent enteral feeding pump in the U.S. designed to deliver thick, homogenized, and blenderized formulas in addition to standard enteral nutrition. That makes it the right pump for patient populations who have swallowing difficulties, GI motility issues, or who rely on whole-food blended diets.

    At just 1.2 lbs without the pole clamp, the OMNI is significantly lighter than its predecessors, with a rubberized impact-resistant housing, an integrated handle, Night Mode for quiet overnight use, and IP26 water-jet-proof construction that lets you clean it under running water. It delivers formula at 1–400 ml/h with ±5% accuracy, runs up to 20 hours on a charge at 125 ml/h, and stores up to 30 days of feeding history — more than double the 72-hour log of the ePump. The color LCD display with animated setup guides, color-coded cassette system, and configurable 19-language interface all reduce training burden for caregivers in home and facility settings alike.

    IPR Medical buys, sells, repairs, and stocks parts for the Kangaroo™ OMNI™ Enteral Feeding Pump. We also stock the Kangaroo OMNI ENtelliSet feeding sets and accessories, so you can get your pump and your consumables from a single source. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    RecertifiedQuick View

    Curlin Painsmart

    Original price was: $1,095.00.Current price is: $995.00.

    The Moog Curlin PainSmart is a compact, lightweight ambulatory infusion pump built on the proven Curlin 6000 platform and designed specifically for PCA (Patient Controlled Analgesia), PCEA, and subcutaneous pain management therapies. At just 1.1 lbs and roughly the size of a deck of cards, the PainSmart supports intravenous, epidural, and subcutaneous administration routes with delivery in milliliters, milligrams, or micrograms. Flow rates range from 0.1 to 400 ml/h with 0.1 ml/h resolution, and the patented curvilinear peristaltic mechanism delivers fluid in 2-microliter increments for exceptionally smooth, consistent delivery — particularly important for short half-life drugs and low-rate infusions.

    The PainSmart features built-in medication limits (medLMTS™), customizable maximum basal, bolus, clinician dose, and load dose limits, adjustable downstream occlusion settings, an integral air-in-line sensor, and three tamper-resistant lock levels for patient safety. The optional Info-On-Demand (IOD) model adds real-time bedside access to hourly totals, bolus data, and infusion status without pausing the pump. The pump runs on two standard C-cell alkaline batteries with operating times up to 85 hours at 2 ml/h, and accepts an optional rechargeable Li-Ion battery pack and AC adapter for extended or facility-based use.

    IPR Medical buys, sells, repairs, and stocks parts for the Moog Curlin PainSmart. Whether you need a recertified pump, a replacement part, or a repair on an existing unit, contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    RecertifiedQuick View

    Curlin Painsmart IOD Epidural

    Original price was: $1,095.00.Current price is: $995.00.

    The Moog Curlin PainSmart IOD EPI is a compact ambulatory infusion pump built on the proven Curlin 6000 platform and factory-configured specifically for epidural pain management. It is purpose-built for patient-controlled epidural analgesia (PCEA), continuous epidural infusion, and subcutaneous pain therapies in postoperative, labor and delivery, palliative care, and ambulatory surgery settings. The EPI designation means the pump’s administration route is fixed to epidural — the Therapy Identifier bar displays “EPI” rather than “PCA” — reducing programming confusion and reinforcing safe practice in clinical environments where epidural lines are managed alongside other infusions.

    Like all PainSmart IOD models, the EPI variant features dedicated Info-On-Demand buttons that allow clinicians to view real-time infusion data — hourly totals, boluses attempted and given, shift totals, and line pressure — without pausing the running therapy. The epidural basal rate maximum is 25 ml/h, and patient bolus doses are programmable from 0.1 to 25 ml per dose with a lockout interval of 1 to 60 minutes. Built-in medLMTS™ medication limits, PLSS protocol library support, three tamper-resistant lock levels, and a 6,000-event data log provide comprehensive safety and documentation.  Moog’s yellow-striped epidural administration sets with 0.22 micron filters and integral flow-stop free-flow protection are designed specifically for this pump configuration.

    IPR Medical buys, sells, repairs, and stocks parts for the Moog Curlin PainSmart IOD EPI. Whether you need a recertified pump, replacement parts, or a repair on an existing unit, contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    RecertifiedQuick View

    Curlin Painsmart IOD PCA

    Original price was: $1,095.00.Current price is: $995.00.

    The CURLIN PainSmart™ IOD (Information on Demand) is Moog Medical’s purpose-built ambulatory PCA pump, designed to safely deliver patient-controlled analgesia, and patient-controlled epidural analgesia (PCEA). Built on the proven CURLIN 6000 volumetric platform, the PainSmart IOD lets patients, nurses, and caregivers retrieve real-time infusion data — hourly totals, boluses attempted and given, line pressure, battery status — instantly at the bedside without pausing the running infusion. That combination of clinical transparency and uninterrupted therapy has made the PainSmart IOD one of the most widely trusted ambulatory PCA pumps in the United States.

    The pump delivers via three administration routes — IV, epidural, and subcutaneous — and programs in milligrams, micrograms, or milliliters depending on clinical workflow. Its patented curvilinear peristaltic pumping mechanism achieves ±5% volumetric accuracy with a flow resolution as low as 2 microliters, producing more precise and steady delivery than standard linear peristaltic designs throughout the full infusion duration. The pump is powered by two standard C-cell alkaline batteries and runs approximately 85 hours at 2 ml/h, 30 hours at 125 ml/h, or 10 hours at 400 ml/h. At just 18.1 oz (513 g), it fits in any of four carry packs for full ambulatory use, or mounts to a pole with the detachable pole clamp.

    IPR Medical buys, sells, repairs, and stocks parts for the Moog CURLIN PainSmart IOD. Contact us at 855-477-8866 or cs@iprmed.com.

  • -23%
    Recertified
    Quick View

    Philips IntelliVue MP70 Patient Monitor | Touchscreen, 12-Lead ECG

    Original price was: $1,295.00.Current price is: $995.00.

    The Philips IntelliVue MP70 (M8007A) is a high-performance bedside patient monitor designed for adult, pediatric, and neonatal intensive care; anesthesia and peri-operative care; and cardiac care environments. Integrating a 15-inch color XGA touchscreen display with an extensive clinical measurement menu — including conventional diagnostic 12-lead ECG, multi-lead arrhythmia analysis, and Event Surveillance — the MP70 operates on Philips’ networked IntelliVue platform, enabling seamless data flow across the hospital enterprise. Its modular architecture supports the Multi-Measurement Server (MMS), MMS extensions, and the Flexible Module Server (FMS), making it a configurable solution for evolving departmental needs.

    Display
    15″ color XGA LCD touchscreen

    Waveforms
    Up to 8 simultaneously; 12-lead ECG screen available

    User Interface
    Touchscreen (standard); optional SpeedPoint and Remote SpeedPoint

    Patient Population
    Adult, Pediatric, Neonatal

    SpO2 Technology
    Philips FAST SpO2, Masimo SET, Nellcor OxiMax

    Screen Configurations
    10 pre-set configurations; fully customizable

    Module Support
    MMS, MMS extensions, FMS (8 slots); 2 integrated plug-in slots (modules sold separately)

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue MP70. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A01, FAST SpO2

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A01) is the standard-configuration Multi-Measurement Module for the IntelliVue bedside patient monitoring platform. Designed to plug directly into the rear of IntelliVue MP-series and MX-series host monitors — or connect via MSL cable — the M3001A acquires and transmits ECG, arrhythmia, ST segment, respiration, Philips FAST SpO2, and oscillometric NBP measurements to the host display without requiring cable changes or parameter re-setup. Because patient demographics, trend data, and measurement settings are stored in the module itself, the M3001A travels with the patient: disconnect it at one IntelliVue monitor and reconnect it at another, and the patient record follows seamlessly. The A01 option designates Philips FAST SpO2 pulse oximetry technology and is compatible with the full Nellcor OxiMax sensor line.

    Part Number / Option
    M3001A, Option A01

    Parameters Monitored
    ECG (3/5-lead), Arrhythmia, ST, Respiration, Philips FAST SpO2, NBP (oscillometric)

    SpO2 Technology
    Philips FAST SpO2 — compatible with Nellcor OxiMax sensors

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    Optional Extensions
    M3015A (sidestream CO2), M3016A (mainstream CO2), M3012A (additional press/temp/CO2)

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A02, Nellcor OxiMax SpO2

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A02) is the Nellcor OxiMax-compatible configuration of the IntelliVue Multi-Measurement Module for the IntelliVue bedside patient monitoring platform. Functionally identical to the standard M3001A in ECG, arrhythmia, ST, respiration, and oscillometric NBP capability, the A02 option is specifically engineered for facilities standardized on Nellcor OxiMax sensors — using a dedicated OxiMax-compatible SpO2 interface rather than the Philips FAST SpO2 circuit found in Option A01. The module plugs directly into the rear of any compatible IntelliVue host monitor — or connects via MSL cable — and transmits all measurement data to the host display without requiring cable changes or parameter re-setup between units. Patient demographics, trend data, and measurement settings are stored within the module itself, so the patient record travels with the MMS when the patient moves between units or monitors.

    Part Number / Option
    M3001A, Option A02

    Parameters Monitored
    ECG (3/5-lead), Arrhythmia, ST, Respiration, Nellcor OxiMax SpO2, NBP (oscillometric)

    SpO2 Technology
    Nellcor OxiMax-compatible — for use with Nellcor OxiMax sensor line

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    Optional Extensions
    M3015A (sidestream CO2), M3016A (mainstream CO2), M3012A (additional press/temp/CO2)

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

     

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A04, Nellcor OxiMax SpO2

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A04) is the newer-hardware-generation Nellcor OxiMax-compatible configuration of the IntelliVue Multi-Measurement Module. Like the A02, the A04 uses a dedicated Nellcor OxiMax-compatible SpO2 interface and delivers the same core clinical measurement set — ECG, arrhythmia, ST, respiration, OxiMax SpO2, and oscillometric NBP — to any compatible IntelliVue host monitor. The defining distinction from the A02 is internal: the A04 runs on the newer hardware revision C platform, identified by serial number prefixes DE610, DE632, DE717, and DE907, which integrates the DC/DC power circuit onto the main board rather than as a separate component. This hardware generation supports a wider range of IntelliVue software revisions and uses a distinct parameter board assembly. The A04 is the correct Nellcor OxiMax module choice for facilities sourcing units or parts for newer-generation M3001A hardware, or for host monitors requiring hardware revision C compatibility.

    Part Number / Option
    M3001A, Option A04

    Parameters Monitored
    ECG (3/5-lead), Arrhythmia, ST, Respiration, Nellcor OxiMax SpO2, NBP (oscillometric)

    SpO2 Technology
    Nellcor OxiMax-compatible — for use with Nellcor OxiMax sensor line via M1943NL adapter cable

    Hardware Generation
    Revision C — serial number prefixes DE610, DE632, DE717, DE907; newer platform vs. A02

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

  • -9%
    Recertified
    Quick View

    Philips IntelliVue M3001A Multi-Measurement Module | Option A01C06, FAST SpO2, IBP & Temp

    Original price was: $1,095.00.Current price is: $995.00.

    The Philips IntelliVue M3001A (Option A01C06) is the extended-measurement configuration of the IntelliVue Multi-Measurement Module with Philips FAST SpO2. Building on the A01 standard package — ECG, arrhythmia, ST, respiration, FAST SpO2, and oscillometric NBP — the C06 option adds a combined invasive pressure and temperature connector, enabling the module to support either invasive blood pressure monitoring or temperature measurement in addition to the full core parameter set. This makes the A01C06 the most clinically complete single-MMS configuration available without adding 12-lead ECG, and the module most commonly deployed in ICU, step-down, and critical care transport environments where arterial line monitoring or core temperature tracking is routinely required. As with all M3001A variants, patient demographics, trend data, and measurement settings are stored in the module itself and travel with the patient between IntelliVue host monitors.

    Part Number / Option
    M3001A, Option A01C06

    Parameters Monitored
    ECG (3/5-lead), Arrhythmia, ST, Respiration, Philips FAST SpO2, NBP (oscillometric), Invasive Pressure OR Temperature (shared port — not simultaneous)

    SpO2 Technology
    Philips FAST SpO2 — compatible with Nellcor OxiMax sensors

    IBP / Temp Port
    One combined connector — supports invasive pressure transducer OR temperature probe; pressure and temperature cannot be used simultaneously on this port

    Host Monitor Compatibility
    IntelliVue MP20/30/40/50/60/70/80/90; MX-series; M3046A (M/M4)

    Data Storage
    Up to 8 hrs of trend data at 1-min resolution stored in module; retained 6 hrs while disconnected

    IPR Medical buys, sells, repairs, and stocks parts for the Philips IntelliVue M3001A. Contact us at 855-477-8866 or cs@iprmed.com.

What are you looking for?