-
Baxter Sigma Spectrum Version 6
Original price was: $995.00.$795.00Current price is: $795.00.The Baxter SIGMA Spectrum Version 6 is one of the most recognizable large-volume infusion pumps in North American acute care — and for good reason. The Spectrum platform built its reputation on one thing: keeping clinicians from making programming errors under pressure. Dose Error Reduction Software (DERS) defaults on at startup, your Master Drug Library enforces soft and hard limits by care area, and the guided bedside workflow means staff spend less time second-guessing and more time focused on the patient.
Flow rates run 0.5 to 999 ml/h with ±5% accuracy, the pump supports a full range of clinical modes including titration on the fly and multi-step ramping, and optional 802.11b/g wireless lets your biomed team push drug library updates and pull CQI data across the fleet remotely. If you’re running Spectrum pumps already, the V6 slots right into your existing infrastructure — same IV sets, same staff training, same wireless backbone. If you’re building a fleet from scratch, it’s a proven platform at a price point that’s hard to argue with.
Also available:
- Baxter Sigma Spectrum Version 8 — enhanced drug library and wireless updates, same proven Spectrum platform
- Baxter Spectrum IQ — full EMR integration with Auto-Programming, Auto-Documentation, and built-in asset tracking
IPR Medical stocks compatible Baxter IV administration sets, so you can source pumps and sets from one place. If you’re building or refreshing a Spectrum fleet on a budget, the V6 delivers the proven platform at a lower cost than later versions, with full repair and parts support from IPR Medical. Call us at 855-477-8866 or reach out at cs@iprmed.com.
-
BD Alaris 8015 PC Unit (4.7″ Display)
Original price was: $550.00.$495.00Current price is: $495.00.The BD Alaris 8015 PC Unit with the 4.7″ display is the original form factor of the Alaris PCU — the same modular command center that became one of the most deployed infusion platforms in North American acute care, just with a smaller screen. Everything that defines the Alaris system is here: up to four attached infusion and monitoring modules (pump, syringe, PCA, SpO2, EtCO2) under a single unified interface, Guardrails Suite MX running up to 30 care area profiles with facility-defined soft and hard dose limits, and wireless connectivity via Alaris Systems Manager for fleet-wide drug library updates and CQI reporting. The 4.7″ display is smaller than the 5.7″ variant but runs the same software, accepts the same modules, and fits the same pole clamp — meaning any facility already running 4.7″ units can add to the fleet without retraining staff or changing workflows.
If your facility needs the larger screen for high-acuity environments where bedside visibility matters, the 5.7″ version is also available from IPR Medical. Also available: BD Alaris 8015 with 5.7″ display But if you’re stocking up on a proven platform at a lower price point, or simply replacing units in an existing 4.7″ fleet, this is a cost-effective way to do it without compromising on capability.
IPR Medical buys, sells, repairs, and stocks parts for the BD Alaris 8015. Call us at 855-477-8866 or email cs@iprmed.com.
-
BD Alaris 8015 PC Unit (5.7″ Display)
Original price was: $1,295.00.$895.00Current price is: $895.00.The BD Alaris 8015 PC Unit is the brain of one of the most widely deployed modular infusion systems in North American hospitals. It doesn’t deliver medication on its own — it’s the command center. Attach up to four Alaris infusion and monitoring modules (pump, syringe, PCA, SpO2, EtCO2) to a single PCU, and it gives every one of them a unified color interface, a shared drug library, and one place to program, monitor, and alarm. For facilities managing complex patients on multiple simultaneous infusions, that common user interface is a real operational advantage — less device-switching, less cognitive load, fewer programming errors.
What makes the Alaris system worth running is Guardrails Suite MX. Up to 30 patient-specific care area profiles, each with its own drug library, soft and hard dose limits, concentration guidelines, and IV fluid entries. The library runs on every device in the fleet, wirelessly updated through Alaris Systems Manager, and the CQI Reporter pulls infusion event data for ongoing safety improvement.
Also available: BD Alaris 8015 with 4.7″ displayThe 5.7″ display model is the larger-screen version of the 8015, and if your staff has used either the 4.7″ or 5.7″ variants, they’ll recognize the workflow instantly. IPR Medical buys, sells, repairs, and stocks parts for the BD Alaris 8015. Call us at 855-477-8866 or email cs@iprmed.com.
-
GE CARESCAPE B450 Patient Monitor | Touchscreen, Transportable
The GE CARESCAPE B450 is a 12-inch touchscreen multi-parameter patient monitor designed for flexible-acuity care areas including emergency departments, PACU, ICU, NICU, step-down units, and surgery centers. Built on the CARESCAPE monitoring platform, the B450 supports the CARESCAPE Patient Data Module (PDM), Patient Side Module (E-PSM/E-PSMP), and a single-width E-module slot, making it capable of continuous hemodynamic, respiratory, and neurophysiological monitoring at the bedside and during intra-hospital transport. Wireless and LAN connectivity, internal lithium-ion batteries, and care-area-specific software packages (OR, PACU, ICU, NICU, ED) make it one of the most versatile transportable monitors GE has produced on the Bx50 platform.
Display
12 in TFT LCD touchscreen, 1024 x 768 (XGA), 6 traces maxParameters Monitored
ECG (3/5/6/10 lead), SpO2, NIBP, IBP, temperature, CO2, agents, BIS, Entropy, NMT, EEG, CCO, SvO2 (via PDM, E-PSM/E-PSMP, and E-modules)Patient Population
Adult, pediatric, neonatalBattery / Portability
1 or 2 exchangeable Li-Ion batteries, up to 3.5 hours runtime; integrated carrying handle, GCX and FM Quick-Mount compatibleConnectivity
CARESCAPE Network, S/5 Network, MUSE, Unity Network ID; LAN (3x RJ45), optional WLAN 802.11a/b/gNotable Features
12SL diagnostic ECG, DINAMAP SuperSTAT NIBP, EK-Pro arrhythmia, optional in-built thermal recorderIPR Medical buys, sells, repairs, and stocks parts for the GE CARESCAPE B450. Contact us at 855-477-8866 or cs@iprmed.com.
-
GE CARESCAPE B650 Patient Monitor | 15″ Touchscreen, Modular
The GE CARESCAPE B650 is a multi-parameter patient monitor intended for use in multiple areas and intrahospital transport within a professional healthcare facility. Built on the CARESCAPE platform, it combines a 15-inch touchscreen, a pivoting module frame, and compatibility with the Patient Data Module (PDM) and E-series plug-in modules for flexible clinical coverage across CCU, PACU, ED, NICU, and OR environments. The B650 supports EK-Pro arrhythmia analysis, 12SL ECG diagnostics, and integration with CARESCAPE Network-connected systems such as MUSE and CARESCAPE Central Station.
Display
15-inch color LCD touchscreenParameters Monitored
ECG, arrhythmia, ST, NIBP, SpO₂, IBP, temperature, respiration, CO₂, anesthetic agents, O₂, N₂O, and additional parameters via PDM/E-modulesPatient Population
Adult, pediatric, and neonatalBattery / Portability
Optional internal lithium-ion battery supports intrahospital transportConnectivity
CARESCAPE Network MC and IX; wired and wireless options; MUSE and Central Station integrationNotable Features
Pivoting module frame, PDM support, EK-Pro arrhythmia, 12SL diagnostic ECG, hardened Linux OSIPR Medical buys, sells, repairs, and stocks parts for the GE CARESCAPE B650 Patient Monitor. Contact us at 855-477-8866 or cs@iprmed.com.
-
GE CARESCAPE PDM Patient Data Module | DINAMAP, 12-Lead ECG
The GE CARESCAPE Patient Data Module (PDM) is a transportable, self-powered acquisition module that captures all hemodynamic monitoring data from the patient and stays with them throughout intra-hospital transport. The PDM docks into the GE CARESCAPE B450, B650, and B850 host monitors, the Solar 8000 family, and the Transport Pro device — collecting 3-, 5-, 6-, and 10-leadwire ECG with 12SL diagnostic 12-lead and optional 12RL derived 12-lead, EK-Pro four-lead arrhythmia, DINAMAP SuperSTAT NIBP, up to 4 invasive pressures, 2 temperatures, optional cardiac output, and SpO2 (Masimo SET or Nellcor OxiMax). Its onboard lithium-ion battery, 24-hour data buffer, and ability to power the Transport Pro during low-battery conditions make it the GE platform’s answer to data continuity during patient movement.
Module Type
Docking acquisition module with onboard battery and data storageParameters Acquired
ECG, respiration, NIBP, SpO2, temperature (2), invasive pressure (up to 4), cardiac outputPatient Population
Adult, pediatric, neonatal — one patient at a timeCompatible Host Monitors
CARESCAPE B450, B650, B850; Solar 8000 / 8000M / 8000i; Transport ProBattery / Portability
Removable Li-Ion 11.1 V, 1.8 Ah; ~1.5 hour runtime; 2.9 lbs with batteryNotable Features
12SL diagnostic ECG, optional 12RL derived 12-lead, DINAMAP SuperSTAT NIBP, EK-Pro four-lead arrhythmia, 24-hour data storage with 36 arrhythmia eventsIPR Medical buys, sells, repairs, and stocks parts for the GE CARESCAPE PDM. Contact us at 855-477-8866 or cs@iprmed.com.
-
GE CARESCAPE V100 DINAMAP Vital Signs Monitor | NIBP, SpO2
The GE CARESCAPE V100 DINAMAP is a battery-powered, transportable vital signs monitor designed for sub-acute and low-acuity care areas — emergency departments, medical-surgical units, recovery, labor and delivery, endoscopy, cardiac step-down, satellite clinics, and physicians’ offices. Built on the proven DINAMAP NIBP platform, the V100 supports DINAMAP SuperSTAT, Classic, or Auscultatory Reference algorithms, three SpO2 technology options (GE Ohmeda TruSignal, Nellcor OxiMax, or Masimo SET), and three temperature options (Exergen TemporalScanner, Alaris Turbo Temp, or Alaris Tri-Site). It can run as a spot-check device or in continuous monitoring mode, weighs 5.4 lbs with battery, and provides up to 11 hours of typical battery life on a single charge.
Display
Large red LED numerical display visible from across the roomParameters Monitored
NIBP (systolic, diastolic, MAP), pulse rate, optional SpO2, optional temperaturePatient Population
Adult, pediatric, neonatal — one patient at a timeBattery / Portability
Sealed lead acid 6V, up to 11 hours typical runtime; 5.4 lbs with battery; recessed handle, IPX1 water resistanceConnectivity
DB15 host communications port; supports USB, RS-232, and IrDA accessories; DINAMAP Serial Hub for up to three accessoriesNotable Features
DINAMAP SuperSTAT NIBP (14-second determination), optional integrated thermal printer, 40-measurement memory over 24 hoursIPR Medical buys, sells, repairs, and stocks parts for the GE CARESCAPE V100 DINAMAP. Contact us at 855-477-8866 or cs@iprmed.com.
-
GE Dash 4000 Patient Monitor | 10.4″ Display, Transportable
The GE Dash 4000 is a transportable multi-parameter patient monitor with a 10.4-inch active-matrix color display, designed for the emergency department, surgery center, OR, PACU, ICU, and step-down unit. Its rugged enclosure, integrated battery operation, optional wireless networking, and built-in thermal recorder make it well suited for both bedside monitoring and intra-hospital transport. Standard parameters include ECG with EK-Pro arrhythmia and 12SL diagnostic 12-lead ECG, DINAMAP SuperSTAT NIBP, impedance respiration, SpO2 (GE Ohmeda, Masimo SET, or Nellcor OxiMax), and temperature, with optional invasive pressure (up to 4 channels), CO2, BISx, and ICG.
Display
10.4 in active-matrix color TFT, 640 x 480 pixels, up to 7 waveformsParameters Monitored
ECG, NIBP, impedance respiration, SpO2, temperature; optional IBP (up to 4), CO2, BISx, ICG, SAMPatient Population
Adult, pediatric, neonatalBattery / Portability
Up to 2 exchangeable Li-Ion batteries; 12.6 lbs; integrated handle; optional Dash Port 2 docking stationConnectivity
CARESCAPE Network (formerly Unity Network); LAN 10BASE-T; optional 802.11 a/b/g WLANNotable Features
12SL diagnostic ECG with ACI-TIPI, EK-Pro arrhythmia, IntelliRate alarm reduction, optional in-built thermal writerIPR Medical buys, sells, repairs, and stocks parts for the GE Dash 4000. Contact us at 855-477-8866 or cs@iprmed.com.
-
GE E-CAiO Compact Airway Module | 5-Agent, CO2/N2O/O2, Sidestream
The GE E-CAiO is a single-width plug-in airway gas module for CARESCAPE Monitor B450, B650, and B850 platforms, S/5 modular monitors, and AS/3 anesthesia monitors. It uses sidestream sampling and GE infrared/paramagnetic sensor technology to measure inspired and end-tidal CO2, N2O, O2, and all five common anesthetic agents (halothane, enflurane, isoflurane, sevoflurane, desflurane), with automatic agent identification and detection of two-agent mixtures. The E-CAiO is the entry-level Compact Airway Module in the C-A-i-O family — without patient spirometry (V) or gas exchange (X) — making it the right choice for OR and PACU environments that need full anesthetic agent monitoring but rely on the anesthesia machine’s own ventilator for spirometry.
Module Type
Single-width plug-in sidestream airway gas moduleParameters
CO2, N2O, O2, 5-agent AA with identification, respiration rateAnesthetic Agents
Halothane, enflurane, isoflurane, sevoflurane, desflurane (2-agent mixture detection)Sampling
Sidestream, 200 ±20 ml/min, single sample line at patient airwayCompatible Hosts
CARESCAPE B450/B650/B850; S/5, AS/3, CS/3 modular monitorsPatient Population
Adult, pediatric, neonatalIPR Medical buys, sells, repairs, and stocks parts for the GE E-CAiO Compact Airway Module. Contact us at 855-477-8866 or cs@iprmed.com.
-
GE E-PSM Patient Side Module | CARESCAPE & S/5, 12-Lead, NIBP
The GE E-PSM is a single-width plug-in hemodynamic acquisition module for the CARESCAPE B650, CARESCAPE B850, CARESCAPE B450, and S/5 modular monitor platforms. It combines 12-lead ECG with ST segment analysis, impedance respiration, GE SpO2 with plethysmography, two temperature channels, and DINAMAP-based NIBP in a single module. The E-PSM is the non-IBP variant of the E-PSMP — same ECG, SpO2, NIBP, temperature, and respiration capabilities, without the two invasive pressure channels — making it the right consolidation choice for med-surg, step-down, PACU, and general ward environments where invasive lines are not part of the standard workflow.
Module Type
Single-width plug-in hemodynamic acquisition moduleParameters
ECG, ST, Impedance Respiration, SpO2, NIBP, 2x TemperatureECG Configuration
3-, 5-, 6-, or 10-leadwire (3-, 7-, 8-, or 12-lead in CARESCAPE)SpO2 Technology
GE SpO2 (Masimo and Nellcor available via separate modules)NIBP Algorithm
GE DINAMAP, oscillometricCompatible Hosts
CARESCAPE B450/B650/B850, S/5 modular (via F5/F7 frame or Module Bus Adapter)IPR Medical buys, sells, repairs, and stocks parts for the GE E-PSM Patient Side Module. Contact us at 855-477-8866 or cs@iprmed.com.
-
GE E-PSMP Patient Side Module | CARESCAPE & S/5, 12-Lead, Dual IBP
The GE E-PSMP is a single-width plug-in hemodynamic acquisition module for the CARESCAPE B650, CARESCAPE B850, CARESCAPE B450, and S/5 modular monitor platforms. It combines 12-lead ECG with ST segment analysis, impedance respiration, GE SpO2 with plethysmography, dual invasive pressures (P1, P2), two temperature channels, and DINAMAP-based NIBP in a single module — making it the most fully featured hemodynamic module in the E-Series catalog and a common consolidation choice for OR, ICU, PACU, and step-down environments.
Module Type
Single-width plug-in hemodynamic acquisition moduleParameters
ECG, ST, Impedance Respiration, SpO2, NIBP, 2x IBP, 2x TempECG Configuration
3-, 5-, 6-, or 10-leadwire (3-, 7-, 8-, or 12-lead in CARESCAPE)SpO2 Technology
GE SpO2 (Masimo and Nellcor available via separate modules)NIBP Algorithm
GE DINAMAP, oscillometricCompatible Hosts
CARESCAPE B450/B650/B850, S/5 modular (via F5/F7 frame or Module Bus Adapter)IPR Medical buys, sells, repairs, and stocks parts for the GE E-PSMP Patient Side Module. Contact us at 855-477-8866 or cs@iprmed.com.
-
GE E-sCAiO CARESCAPE Respiratory Module | 5-Agent, Sidestream
The GE E-sCAiO is a single-width, small-form-factor plug-in respiratory module from GE Healthcare’s CARESCAPE Respiratory Module family — the next-generation successor to the original Compact Airway Module line (E-CAiO/E-COV). It uses sidestream sampling and GE infrared and paramagnetic sensor technology to measure inspired and end-tidal CO2, N2O, O2, and all five common anesthetic agents (halothane, enflurane, isoflurane, sevoflurane, desflurane) with automatic agent identification and two-agent mixture detection.
The “s” denotes the small footprint that frees up slot space in the CARESCAPE B650 for the Entropy module or other parameter modules. The E-sCAiO is the gas-and-agent-only variant — without patient spirometry (V) or gas exchange (X) — and is compatible with CARESCAPE B450, B650, and B850 monitors, the B40 monitor, and the Aisys CS2, Avance CS2, and Carestation 620/650/650c anesthesia workstations.
Module Type
Single-width, small-form-factor sidestream respiratory moduleParameters
CO2, N2O, O2, 5-agent AA with identification, respiration rateAnesthetic Agents
Halothane, enflurane, isoflurane, sevoflurane, desflurane (2-agent mixture detection)Sampling
Sidestream, 120 ±20 ml/min, single sample line at patient airwayCompatible Hosts
CARESCAPE B450/B650/B850, B40(i); Aisys CS2, Avance CS2, Carestation 620/650/650cStandards
IEC 60601-1 3rd edition compliantIPR Medical buys, sells, repairs, and stocks parts for the GE E-sCAiO CARESCAPE Respiratory Module. Contact us at 855-477-8866 or cs@iprmed.com.
IPR Medical
0
Cart:
$0.00
No products in the cart.
Shop all products
Shop
